?
Методика изготовления и физические свойства туннельных переходов микронных размеров
С. 223–225.
Publication based on the results of:
In book
М.: ООО "Издательский дом Медиа паблишер", 2024.
Rastoropov S., Solomatina A., Yakovleva V. et al., Relacoes Internacionais no Mundo Atual 2024 Vol. 3 No. 45 P. 381–391
This article aims to form an idea of the developed new technologies and, based on the analysis of their practical potential, to determine the possibility of using them in the investigation of crimes, especially those committed in the field of information and telecommunication technologies. ...
Added: December 5, 2024
Chen H., Zhao Z., Li W. et al., Optics Letters 2023 Vol. 48 No. 1 P. 81–84
Bolometers based on graphene have demonstrated
outstanding performance with high sensitivity and short
response time. In-situ adjustment of bolometers is very
important in various applications, but it is still difficult to
implement in many systems. Here we propose a gate-tunable
bolometer based on two strongly-coupled graphene
nanomechanical resonators. Both resonators are exposed to
the same light field, and we can measure the ...
Added: November 25, 2022
Panov D., Bichkov V. Y., Tulenin Y. P. et al., Journal of Surface Investigation: X-Ray, Synchrotron and Neutron Techniques 2021 Vol. 15 No. 6 P. 1264–1269
It is shown that copper films with copper nanowires located on them demonstrate enhancement of the catalytic effect during copper-oxide oxidation. Nanowires of different types (cylindrical and conical ones and arrays between two surfaces) are compared. It is revealed that the largest effect (an increase in the degree of oxidation by 60–70%) is achieved in ...
Added: September 23, 2022
Kovalets N. P., Panov D., Filippova Y. A. et al., Bulletin of the Russian Academy of Sciences: Physics 2021 No. 85 P. 1400–1403
Ni and Fe metal nanowires of different lengths are synthesized in nanoporous matrices of polyethylene terephthalate track membranes. As samples dry, point agglomeration of the ends of the nanowires is observed at lengths corresponding to theoretical estimates. Point contact of nanowires can be used in surface-enhanced Raman scattering (SERS). ...
Added: September 23, 2022
IEEE, 2021.
3M-NANO is the annual International Conference on Manipulation, Manufacturing and Measurement on the Nanoscale; it will be held on 2-6 August 2021 in Xi'an, China. The ultimate ambition of this conference series is to bridge the gap between nanosciences and engineering sciences, aiming at technology opportunities and new markets. The advanced technologies for manipulation, manufacturing ...
Added: January 12, 2022
WEI-JIE LI W. L., CHENG Z., KANG L. et al., Optics Express 2021 Vol. 29 No. 11 P. 16241–16248
Graphene has been considered as one of the best materials to implement mechanical
resonators due to their excellent properties such as low mass, high quality factors and tunable
resonant frequencies. Here we report the observation of phonon lasing induced by the photonthermal
pressure in a few-layer graphene resonator at room temperature, where the graphene
resonator and the silicon substrate ...
Added: October 24, 2021
Arutyunov K., Lehtinen J. S., Radkevich A. A. et al., Communications Physics 2021 Vol. 4 Article 146
Rapid miniaturization of electronic devices and circuits demands profound understanding of
fluctuation phenomena at the nanoscale. Superconducting nanowires – serving as important
building blocks for such devices – may seriously suffer from fluctuations which tend to
destroy long-range order and suppress superconductivity. In particular, quantum phase slips
(QPS) proliferating at low temperatures may turn a quasi-one-dimensional superconductor
into a resistor ...
Added: October 24, 2021
Zhukov A., Bobrova E., Бессонов И. В. et al., Нанотехнологии в строительстве: научный интернет-журнал 2020 Т. 12 № 6 С. 313–319
The main provisions of the methodology described in the article are formed on the basis of statistical methods of conducting an experiment and studying technological processes. This technique makes it possible to significantly reduce the number of experiments conducted while maintaining the adequacy of the results obtained and makes possible further analytical optimization of the ...
Added: February 5, 2021
М.: МАКС Пресс, 2020.
This issue provides abstracts of XIII International Conference «Silicon – 2020» and XII Young Scientists Scholarship participants presentations devoted to the actual problems of silicon electronics and nano-devices. Presentations touch issues of advanced electronic elements, their fabrication processes and the way of application. Beside traditional topics of silicon bulk, surface and interface interaction influence upon ...
Added: November 29, 2020
IEEE, 2020.
Added: September 19, 2020
Roud V., Sokolov A., Meissner D., , in: Emerging Technologies for Economic Development.: Springer, 2019. Ch. 3 P. 49–76.
. ...
Added: May 14, 2019
Aydogdu A., Burmaoglu S., Saritas O. et al., Foresight 2017 Vol. 19 No. 4 P. 354–375
Purpose
Technologies are constantly developed to address new demands and provide further opportunities. Owing to a number of potential application areas of nanotechnologies within this sector, the purpose of this study is to take defense as a case and propose a strategic roadmap for the use of nanotechnologies in the Turkish Defense Industry.
Design/methodology/approach
The study presented in ...
Added: March 1, 2019
Shapiro D.S., Shick A. B., Kolorenc J. et al., Scientific Reports 2017 Vol. 7 No. 1 P. 2751-1–2751-6
We address a recent controversy concerning the magnetic state of holmium adatom on platinum surface. Within a combination of the density functional theory (DFT) with the exact diagonalization
(ED) of Anderson impurity model, the 〈Jz〉=0 paramagnetic ground state |J =8, Jz = ±8〉 is found. In anexternal magnetic field, this state is transformed to a spin-polarized state with 〈Jz〉≈ 6.7. We emphasize ...
Added: February 7, 2019
Лехтинен Я., Lvov B. G., Arutyunov K., Физика твердого тела 2018 Т. 60 № 11 С. 2096–2099
Экспериментально исследовались вольт-амперные характеристики тонких сверхпроводящих нанопроводов из титана. Наиболее тонкие образцы, измеряемые высокомными контактами, обнаружили нетривиальное для сверхпроводника поведение: кулоновскую блокаду. Величина кулоновской щели коррелирует с частотой квантовых проскальзываний фазы. Наблюдение подтверждает идентичность квантовой динамики заряда в джозефсоновских контактах и в квазиодномерных сверхпроводящих каналах в режиме квантовых флуктуаций параметра порядка. ...
Added: October 30, 2018
Мн.: БНТУ, 2017.
Издание включает материалы 10-й Международной научно-технической конференции молодых ученых и студентов «Новые направления развития приборостроения» по направлениям: информационно-измерительная техника и технологии; конструирование и производство приборов; микро- и нанотехника; оптоэлектроника, лазерная техника и
технология; стандартизация, метрология и информационные системы; прикладные задачи приборостроения; экономика и управление производством в области приборостроения. ...
Added: July 31, 2017
Grinin L. E., Гринин А. Л., , in: Evolution. From Big Bang to Nanorobots.: Volgograd: ., 2015. P. 251–330.
The article analyzes the technological shifts which took place in the second half of the 20th and early 21st centuries and forecasts the main shifts in the next
half a century. On the basis of the analysis of the latest achievements in innovative technological directions and also on the basis of the opportunities provided by the ...
Added: November 5, 2015
Linton J. D., Walsh S., International Journal of Entrepreneurial Behaviour and Research 2013 Vol. 19 No. 2 P. 165–186
Purpose: The purpose of this paper is to consider whether the characteristics of a technology affect the type of learning mode used for acquiring abilities related to specific competencies. While technological competencies have a direct impact on firm performance for technology-intensive start-ups, few if any of these firms posses all the prerequisite competencies required for ...
Added: October 19, 2015
Grinin L. E., Гринин А. Л., Философия и общество 2015 № 1 С. 17–47
The article analyzes the technological shifts which took place in the second half of the twentieth and early twenty-first centuries and on the basis of the opportunities provided by the theory of production revolutions the authors thoroughly study the latest production revolution which is denoted as ‘Cybernetic’. There are given some forecasts about its development ...
Added: October 9, 2015
Мн.: БНТУ, 2015.
Издание включает материалы 8-й Международной студенческой научно-технической конференции «Новые направления развития приборостроения» по направлениям: информационно-измерительная техника и технологии; конструирование и производство приборов; микро- и нано- техника; оптоэлектроника, лазерная техника и технология; стандартизация, метрология и информационные системы; прикладные задачи прибо- ростроения; экономика и управление производствам в области приборостроения. ...
Added: June 14, 2015
Karaulova M., Shackleton O., Gök A. et al., / Series October 2014 "Manchester Institute of Innovation Research papers". 2014.
Available in SSRN: https://ssrn.com/abstract=2521012
This work was supported by the Economic and Social Research Council [grant number ES/J012785/1] as part of the project Emerging Technologies, Trajectories and Implications of Next Generation Innovation Systems Development in China and Russia. The project addresses research, management and policy issues related to advanced technological development in driving the growth of ...
Added: November 21, 2014
Мн.: БНТУ, 2012.
Издание включает материалы 5-й Международной студенческой научно-технической конференции «Новые направления развития прибо- ростроения» по направлениям: информационно-измерительная техника и технологии; конструирование и производство приборов; микро- и нано- техника; оптоэлектроника, лазерная техника и технология; стандартизация, метрология и информационные системы; прикладные задачи прибо- ростроения; экономика и управление производствам в области приборо- строения. ...
Added: November 1, 2014
Grinin L. E., Anton L. G., , in: Evolution: Development within Big History, Evolutionary and World-System Paradigms.: Volgograd: Uchitel, 2013. P. 143–178.
What determines the transition of a society from one level of development to another? One of the most fundamental causes is the global technological transformations. Among all major technological breakthroughs in history the most important are the three production revolutions: 1) the Agrarian Revolution; 2) the Industrial Revolution and 3) the Scientific-Information Revolution which will transform ...
Added: October 10, 2014
Grinin L. E., Korotayev A., , in: Globalistics and Globalization Studies: Theories, Research & Teaching.: Volgograd: Uchitel, 2013. P. 98–128.
What determines the transition of society from one level of development to another?
One of the most fundamental causes is global technological transformations. Among
all major technological breakthroughs in history the most important are the
three production revolutions: 1) the Agrarian Revolution; 2) the Industrial
Revolution and 3) the Scientifi c-Information Revolution which will transform
into the Cybernetic one.
The article ...
Added: October 10, 2014