?
2023 International Conference on Engineering Management of Communication and Technology (EMCTECH)
IEEE, 2023.
Academic editor: О. В. Варламов
The mission of the IEEE 2023 International Conference «Engineering Management of Communication and Technology» (EMCTECH) is to help promote and advance knowledge in the field of innovation and engineering management. Through discussions on current topics such as business model innovation, new technology directions and applications, managing globalization challenges, development of personal skills etc., we aim to improve essential management and leadership knowledge and skills, and foster active knowledge transfer between the academic and practicing communities.
Chapters
R. R. Gazizov, Kvasnikov A. A., A. A. Yelizarov, , in: 2023 International Conference on Engineering Management of Communication and Technology (EMCTECH).: IEEE, 2023. P. 1–5.
In this article, we present an improved algorithm that identifies for signal propagation paths in electronic devices in a computer simulation system and compare it with an original algorithm. The novel logic of the algorithm uses all possible signal propagation paths, and as an excitation, we apply ultrashort pulses. To get full data on the ...
Added: November 24, 2023
Arutyunov K., Kharitonov I. A., Petrosyants K. O., JETP Letters 2026 Vol. 124 No. 6 P. 1–16
Superconducting properties of metallic micro- and nanowires can be entirely different from those of bulk superconductors. Of particular interest is the nonequilibrium current-induced state of a quasi-one-dimensional superconducting channel. The most interesting phenomenon here is the stepped I–V characteristic, explained by a process known as phase slip center activation. If the origin of such step-like ...
Added: October 13, 2026
Махлуф М., Ozhegov R., Elezov M. et al., Фотоника 2026 Vol. 20 No. 6 P. 414–423
This paper compares the ranging precision of direct time-of-flight (dToF) and non-line-of-sight (NLOS) LiDAR architectures, both using a superconducting nanowire single-photon detector (SNSPD). Both systems operate at 1550 nm with a 50 ps pulsed laser and time-correlated single-photon counting (TCSPC). The dToF configuration achieved approximately 100 µm precision at 10 m, while the NLOS configuration achieved 500 µm precision for ...
Added: October 12, 2026
Tulchinskii G. L., Слово.ру: балтийский акцент 2026 Т. 17 № 3 С. 6–25
The intensive transformation of social communication in the digital format is radically changing business activity, forms of employment, management, education, cultural industries, personal life, and the entire lifestyle. This is a large-scale and profound problem of developing an interdisciplinary approach that would solve two tasks: it would provide a common conceptual platform for analysis and, at ...
Added: October 11, 2026
Goncharov A., Chibisov A., Advanced Theory and Simulations 2023 Vol. 12 No. 13 Article 2200816
Designing stable quantum computers with the ability to correct errors responsibly requires a detailed understanding of the physical processes that underlie these devices. In this study, detailed quantum mechanical simulations of the atomic structure, charge distribution of electron density, and distribution and orientation of magnetic and quantum states as a function of applied external pressure ...
Added: October 11, 2026
Chibisov A., Gnidenko A., Chibisova M. et al., FlatChem 2023 Vol. 41 Article 100533
Manufacturing precise quantum computers with small errors in quantum operations, long coherence times, and low power consumption is the most important challenge in modern nanoelectronics. To understand the operating modes of such calculators in detail, both the optimal arrangement of the qubit system within the structure and changes in its magnetic properties must be comprehensively ...
Added: October 11, 2026
Wu Z., Yu Y., Chibisov A., Materials Today Energy 2023 Vol. 37 Article 101414
The limited availability of lithium metal resources has led to the development of sodium/potassium-ion batteries due to the abundance and low cost of sodium/potassium. However, finding suitable cathode materials with high capacity, stable cycling performance, and efficient electrochemical interface is still challenging. Herein, the honeycomb layered structures of P2-type A2Ni2TeO6 (A = Na, K) have been explored ...
Added: October 11, 2026
Prokhorenko A., Chibisov A., Gnidenko A. et al., The Journal of Physical Chemistry Letters 2024 Vol. 15 No. 41 P. 10295–10300
The development of ultrathin magnets with tunable magnetic properties is essential for advancing quantum computing technologies. In this study, density functional theory (DFT) calculations were employed to investigate the atomic and electronic structures of a ZnO monolayer embedded with cobalt atoms. The impact of spin dynamics on charge transfer within the Co:ZnO system was thoroughly ...
Added: October 11, 2026
Chibisov A., Chibisova M., Modern Electronic Materials 2025 Vol. 71 P. 99–103
The problem of creating energy-efficient quantum computers capable of performing quantum operations without errors is a significant scientific challenge in modern nanoelectronics. This type of computer can be developed using quantum transistors that contain hole qubits and are capable of performing operations on them. Hole qubits are a promising technology for quantum computers due to ...
Added: October 11, 2026
Tyagi V., Srivastava A., Mangal A. et al., Surfaces and Interfaces 2025 Vol. 73 Article 107591
The present work reports the suitability of Functionalized graphene sheet as a sensing material for detecting the diabetes biomarker acetone from Exhaled breath. The adsorption of Acetone on Boron/Nitrogen doped graphene sheet has been investigated using the Density Functional theory (DFT). The interaction between acetone and the graphene surface has been investigated in terms of ...
Added: October 11, 2026
Bulakh S., Chibisov A., Srivastava A., Russian Microelectronics 2026 Vol. 55 P. 311–315
The effect of sulfur vacancies on the electronic structure of a molybdenum disulfide (MoS2) monolayer has been studied using density functional theory (DFT) methods implemented in the VASP software package. The ideal structure and systems with one and two sulfur vacancies and various options of defect localization in the MoS2 structure have been discussed. A ...
Added: October 11, 2026
Vangapandu E., Agrawal S., Kumar S. et al., Materials Science in Semiconductor Processing 2026 Vol. 211 Article 110752
Silicides are widely used as local interconnects in integrated circuits (ICs); thus, their nanostructures shall enjoy significant process compatibility with the IC technology. This work reports the utilization of Gold (Au), copper (Cu), and aluminium (Al)-based mono-silicide nanotubes (zig-zag (ZZ) and armchair (AC)) for nanoscale interconnect applications, through a material-device-circuit co-modelling approach. These nanotubes exhibit ...
Added: October 10, 2026
Stepanyants V., Andrey V. Fizulin, Chibirov A. et al., FUTURE TRANSPORTATION 2026 Vol. 6 No. 5 Article 225
Reliable Vehicle-to-Everything (V2X) evaluation requires propagation models that represent terrain and multilevel infrastructure. Most integrated vehicular simulators still rely on planar models, but the magnitude of the resulting bias is unclear. This study quantitatively compares flattened two-dimensional (2D) and terrain-aware three-dimensional (3D) variants of three scenarios using identical Sionna RT settings. The pipeline combines OpenStreetMap ...
Added: October 8, 2026
Ozhegov R., Махлуф М., Goltsman G. et al., Инженерная физика 2026 № 8 С. 27–39
This paper investigates the theoretical limits of object detection within isotropic scattering media using single-photon lidar. Within a simplified model, we derive the fundamental relationship between the maximum attainable detection range and the required photon count per pulse. Two distinct limiting regimes are analyzed: the ballistic photon regime, which maintains high spatial resolution but necessitates ...
Added: October 8, 2026
Merzlinkin V., Khmelev A. V., Севрюков Д. О. et al., St. Petersburg Polytechnical University Journal: Physics and Mathematics 2025 No. 3 P. 205–209
Laser communication using satellites represents a promising avenue for data transmission in geographically distant areas without advanced infrastructure. This approach is characterized by its high transmission rate and low power requirements, providing substantial benefits over optical fiber and radio communication. However, the optical channel should exhibit greater transparency for light transmission, resulting in a severely restricted application of this technique for information ...
Added: October 5, 2026
Дуплинский А. В., Khmelev A. V., Бахшалиев Р. М. et al., St. Petersburg Polytechnical University Journal: Physics and Mathematics 2026 Vol. 17 No. 3 P. 88–92
Quantum key distribution via satellites enables the technology to be applied attranscontinental scale; nevertheless, in contrast to fiber systems, using a free-space opticalcommunication channel presents certain extra technological obstacles. The contribution of theacquisition, pointing and tracking system’s operation to the potential quantum bit error valueis investigated in this research. The polarization extinction ratio measurements varying ...
Added: October 5, 2026
Miller A., Pismeniuk L., Дуплинский А. В. et al., EPJ QUANTUM TECHNOLOGY 2023 Vol. 10 No. 1 P. 52–72
A satellite-constellation based global quantum network could allow secure quantum
communication between remote users worldwide. Such a constellation could be
formed of micro- or even nanosatellites, which have the advantage of being more
cost-effective than larger expensive spacecrafts. At the same time, the features of
quantum communication impose a number of technical requirements that are more
difficult to meet when ...
Added: October 5, 2026
Серебренников Д. А., Belov A. V., Информационные технологии и вычислительные системы 2026 № 3 С. 157–169
В условиях роста стоимости энергоресурсов и необходимости повышения энергоэффективности производственных процессов особую актуальность приобретает задача оптимизации энергопотребления промышленных предприятий. В данной работе рассматривается подход к управлению энергозатратами машиностроительного предприятия на основе методов многокритериальной оптимизации. Постановка задачи включает несколько целевых функций: минимизацию энергопотребления, минимизацию стоимости электроэнергии с учётом тарифных ограничений и максимизацию производственной эффективности. Для решения ...
Added: October 5, 2026
Korobok M., Хлыстунов М. Е., Шемолин И. С., Известия высших учебных заведений. Электроника 2026 Т. 31 № S4.3 С. 473–486
The paper considers the task of implementing the control law for mass-produced power supplies based on an LLC converter. The aim of the study is to create a control law that allows meeting the requirements for the stability of the converter at various parameters of the resonant circuit and the output filter.
For the feedback of ...
Added: October 4, 2026
Stukach O., Ершов И. А., Динамика систем, механизмов и машин 2025 Т. 13 № 3 С. 82–87
The growing complexity of modern urban infrastructure increased demands on the efficiency of heat supply, which must be ensured by the sustainable and efficient operation of supply organizations. Decrease in thermal comfort, or overspending of thermal energy is followed by bad quality of control. Systemically, the heat consumption of residential buildings on a city range ...
Added: September 30, 2026
Zevakhina N., Щипкова А. А., Chinkova A., Voprosy Jazykoznanija 2025 No. 2 P. 105–122
This paper presents experimental evidence for the over-specification (redundant use) of Thai postnominal
numerals in referential communication. The first experiment reveals high rates of over-specification
in oral responses that include Thai postnominal and Russian prenominal numerals tested in a contrastive
multi-number visual context. The second experiment demonstrates lower but still relatively high
rates of over-specification in written responses that ...
Added: September 29, 2026
Volpe V., Palladino R., Storlazzi A., British Food Journal 2026 P. 1–27
Purpose
The application of digital technologies in food information is profoundly transforming how consumers access, interpret and use nutritional information. This paper systematically reviews digital technologies integrated into food labelling systems and evaluates their impact on consumer behaviour, transparency and informed decision-making.
Design/methodology/approach
A systematic literature review (SLR) was conducted following the PRISMA protocol, covering peer-reviewed studies published ...
Added: September 25, 2026
СПб.: ВКАС им. Буденного, 2026.
В сборнике представлены статьи о результатах научных исследований и инновационных технических, технологических и методологических решений в области совершенствованию отечественных систем связи, автоматизации и информационной безопасности. ...
Added: September 23, 2026
Дюканов П. А., Kozhukhov M., Popov D. et al., Электронная техника. Серия 3: Микроэлектроника 2026 Т. 201 № 1 С. 28–34
The paper presents the results of device and process modeling of bipolar transistors on a silicon - silicon oxide - silicon structure. A comparison of the output characteristics of the models and transistor samples showed the high accuracy of the developed model. To improve the performance of eld-e ect transistors with a control p-n-junction, design ...
Added: September 17, 2026