?
Temperature Sensors Modeling for Smart Power IC
P. 161–165.
Petrosyants K., Rjabov N.
The computational model of the temperature sensors integrated on the IC chip with power transistors is developed. The 2D/3D problem of sensor placement is mathematically described by the classic heat transfer equation coupled with the equation for current density distribution. It is shown that parasitic effects of sensor current displacement and thermo-emf generation resulting from a temperature gradients (Seebeck effect) must be taken into account. For this purpose the special differential equation is introduced. The examples of point- and strip-like temperature sensors modeling for power BJTs and ICs are demonstrated.
In book
San Jose: IEEE Components, Packaging and Manufacturing Technology Society, 2011.
Ioanna N. Trunova, Vitaly A. Kuzkin, Physical Review E - Statistical, Nonlinear, and Soft Matter Physics 2025 Vol. 111 No. 1 Article 014227
We investigate thermoelastic behavior of nonlinear chains with an instantaneously created temperature profile.
We focus on a regime, further referred to as the ballistic thermoelasticity. In this regime, macroscopic strains are
small, thermal expansion is linear, conversion of mechanical energy into heat is negligible, and heat transfer
is almost ballistic. Equations describing ballistic thermoelasticity of the chains in ...
Added: January 30, 2025
Krivtsov A., Vitaly A. Kuzkin, Tsaplin V., Physical Review E - Statistical, Nonlinear, and Soft Matter Physics 2024 Vol. 110 No. 5 Article 054123
The transition from a ballistic to a diffusive regime of heat transfer is studied using two models. The first model is a one-dimensional chain with bonds, capable of dissociation. Interparticle forces in the chain are harmonic for bond deformations below a critical value, corresponding to the dissociation, and zero above this value. A kinetic description ...
Added: January 30, 2025
Dmitriev S., Vitaly A. Kuzkin, Krivtsov A., Physical Review E - Statistical, Nonlinear, and Soft Matter Physics 2023 Vol. 108 No. 5 Article 054221
A thermal diode or rectifier is a system that transmits heat or energy in one direction better than in the opposite
direction. We investigate the influence of the distribution of energy among wave numbers on the diode effect for
the junction of two dissimilar harmonic chains. An analytical expression for the diode coefficient, characterizing
the difference between heat ...
Added: January 30, 2025
Gaydukov R. K., Indian Journal of Pure and Applied Mathematics 2026 Vol. 57 No. 3 P. 808–825
The paper is deals with the heat transfer in the laminar flow of a viscous incompressible fluid along a plate with a small heated localized irregularity. It is well known that double- and triple-deck structures of the boundary layer arise in such flow problems. These structures make it possible, among other things, to describe the phenomenon of ...
Added: May 21, 2024
Goltsman G., Александр С., IEEE Transactions on Applied Superconductivity 2023 P. 1–5
We investigate dark counts in SNSPD with spatial resolution, using nanostrip-patterned devices with 50 Ohm matched coplanar waveguide - tapers. We found that the dark counts originate from one or several points along the strip, which we call 'weak points'. We found that the dark counts originating from different points can have different dependence of ...
Added: May 7, 2024
R. K. Gaydukov, V. G. Danilov, Computational Mathematics and Mathematical Physics 2024 Vol. 64 No. 6 P. 1317–1325
Mathematical modeling of the ice–water phase transition during liquid flow inside a pipe
with a small ice buildup on the wall at high Reynolds numbers is considered. As a mathematical model
describing the dynamics of the phase transition, a double-deck boundary layer model and a phase field
system are used. Results of numerical simulation are presented. ...
Added: February 17, 2024
Mamontov A. V., Nefedov V. N., Khritkin S. A., Измерительная техника 2022 № 6 С. 46–51
The actual problem of accelerating and reducing the energy costs of the sheet polymer composite material heat treatment technological process is considered. It is shown that to solve this problem, it is advisable to use the microwave radiation energy as a heating source. The main advantages of the microwave method of the sheet polymer composite ...
Added: October 24, 2022
Zybtsev S., Pokrovskii V., Nasretdinova V. et al., Physical Review B: Condensed Matter and Materials Physics 2019 Vol. 99 Article 235155
We report studies of the Seebeck coefficient S of the quasi-one-dimensional compound NbS3, together with the temperature dependence of its specific conductivity σs and heat capacity cp. The monoclinic phase (NbS3-II) is studied over the temperature range T = 80–400 K, which covers two charge density wave (CDW) transitions at TP1 = 360 K (CDW-1) and TP2 = 150 K (CDW-2). The S(T ) curves show features in the vicinities of ...
Added: October 29, 2021
Mamontov A. V., Nefedov V. N., Nazarov I. et al., Measurement Techniques 2021 Vol. 64 No. 4 P. 314–318
This paper addresses the high-priority goal of reducing the energy cost of heat-treating foam concrete slabs. We show that this problem is best solved using microwaves as a heat source. We discuss the main advantages of microwave curing over traditional techniques for curing foam concrete slabs, and develop a design for a microwave foam concrete ...
Added: October 16, 2021
Konstantin O. Petrosyants, Nikita I. Ryabov, , in: 2020 26th International Workshop on Thermal Investigations of ICs and Systems (THERMINIC).: IEEE, 2020. P. 1–7.
Multi-chip embedded PCBs were in resent years the mainstream technology of electronic packaging size reduction and at the same time providing improved performance. Ultra-small package size obviously strongly impacts the SiP module thermal behaviour. Unfortunately the complete thermal design methodology was not developed for this technology till now. In this work the problem of thermal ...
Added: June 5, 2021
Ismail-zade M. R., Petrosyants K. O., Sambursky L. M. et al., , in: 2020 26th International Workshop on Thermal Investigations of ICs and Systems (THERMINIC).: IEEE, 2020. P. 97–103.
A set of modified compact SPICE models of various flavours of MOSFETs (fabricated by bulk, SOI and SOS technologies) is presented for circuit simulation in the deep-cryogenic temperature range down to 4 K, which is important for space applications and development of scalable quantum computers. All models are constructed using the approach combining macromodeling based ...
Added: June 5, 2021
Mamontov A. V., Nefedov V. N., Nazarov I. et al., Измерительная техника 2021 № 4 С. 44–48
The actual problem of accelerating and reducing the energy costs of the foam concrete slabs heat treatment technological process is considered. It is shown that to solve this problem, it is advisable to use the microwave radiation energy as a heat source. The main advantages of the microwave method of foam concrete slabs heat treatment ...
Added: May 15, 2021
Nefedov V. N., Measurement Techniques 2019 Vol. 62 No. 5 P. 449–454
A method for the construction of microwave devices with longitudinal interaction is proposed. Devices of the present type create uniform cross-sectional distribution of temperature of rods made of polymer composite materials. Results from theoretical and experimental investigations of the cross-sectional distribution of the temperature of the material of the rod as well as the parameters ...
Added: December 2, 2019
Mamontov A. V., Nefedov V. N., Khritkin S. A., Measurement Techniques 2019 Vol. 62 No. 4 P. 365–370
We propose a method for designing transversely illuminated traveling-wave microwave devices. Devices of this type produce a uniform 3D temperature distribution in a polymer-composite rod. We describe theoretical and experimental results from studies of the 3D temperature distribution in the rod, along with the advantages of microwave curing technology over traditional curing techniques for polymer ...
Added: September 9, 2019
Mamontov A. V., Nefedov V. N., Khritkin S. A., Измерительная техника 2019 № 4 С. 57–61
A method for constructing traveling wave type microwave device with a transverse interaction, forming a uniform temperature distribution over the volume of polymer composite rods is proposed. The results of theoretical and experimental studies of the temperature distribution of the rod material are presented. Advantages of microwave technologies of curing of polymeric composite materials in ...
Added: September 3, 2019
Nefedov V. N., Измерительная техника 2019 № 5 С. 52–56
Предложен метод построения микроволновых установок с продольным взаимодействием. Установки такого типа формируют равномерное распределение температуры по поперечному сечению стержней из полимерных композиционных материалов. Представлены результаты теоретических и экспериментальных исследований распределения температуры по поперечному сечению материала стержня, а также параметры микроволновой установки. ...
Added: July 9, 2019
Nefedov V. N., Banov D. K., Bushuev V. D., , in: 2018 International Conference on Actual Problems of Electron Devices Engineering (APEDE).: Саратов: IEEE, 2018. P. 381–386.
The main parameters of beam-type microwave installation with frequency of the electromagnetic field oscillations 2450 MHz, the microwave output power of 4,8 kW for the heat treatment of a carbon fiber parabolic antenna, with heat-resistant epoxy binder, of the aperture diameter 1200 mm, thickness 5 mm are presented. The main results of the temperature distribution ...
Added: October 31, 2018
Nefedov V. N., Махмудов С. А., , in: 2018 International Conference on Actual Problems of Electron Devices Engineering (APEDE).: Саратов: IEEE, 2018. P. 376–380.
A model and method for calculating the temperature distribution of a wide range of materials in a microwave beam-type unit taking into account the reflective walls of the chamber is supposed. The experimental and modeling characteristics of the temperature distribution over the thickness of a homogeneous dielectric material at different distances from the walls of ...
Added: October 30, 2018
Nefedov V. N., Afanas'ev V. V., Ryabikina I. G., , in: 2018 International Conference on Actual Problems of Electron Devices Engineering (APEDE).: Саратов: IEEE, 2018. P. 371–375.
The results of the microwave radiation influence of the electromagnetic field oscillation frequency of 2450 MHz on the process of curing thermosetting epoxy resins, which are used as a binder in the production of polymer composite materials based on basalt, glass and carbon fibers, are presented. It is shown that the density of the cured ...
Added: October 30, 2018