?
Measurement of the Temperature of Dielectric Rods in Heat Treatment in Microwave Devices with Longitudinal Interaction
Measurement Techniques. 2019. Vol. 62. No. 5. P. 449-454.
Nefedov V. N.
A method for the construction of microwave devices with longitudinal interaction is proposed. Devices of the present type create uniform cross-sectional distribution of temperature of rods made of polymer composite materials. Results from theoretical and experimental investigations of the cross-sectional distribution of the temperature of the material of the rod as well as the parameters of the microwave device are presented.
Priority areas:
engineering science
Language:
English
Keywords: temperature distributionwaveguidemicrowave deviceelectrodynamic systempolymer composite materialsource of microwave radiationfiber-glass reinforcement
Publication based on the results of:
Mamontov A. V., Nefedov V. N., Khritkin S. A., Measurement Techniques 2019 Vol. 62 No. 4 P. 365-370
We propose a method for designing transversely illuminated traveling-wave microwave devices. Devices of this type produce a uniform 3D temperature distribution in a polymer-composite rod. We describe theoretical and experimental results from studies of the 3D temperature distribution in the rod, along with the advantages of microwave curing technology over traditional curing techniques for polymer ...
Added: September 9, 2019
Mamontov A. V., Nefedov V. N., Khritkin S. A., Измерительная техника 2022 № 6 С. 46-51
The actual problem of accelerating and reducing the energy costs of the sheet polymer composite material heat treatment technological process is considered. It is shown that to solve this problem, it is advisable to use the microwave radiation energy as a heating source. The main advantages of the microwave method of the sheet polymer composite ...
Added: October 24, 2022
Mamontov A. V., Nefedov V. N., Simonov V., T-Comm: Телекоммуникации и транспорт 2014 Т. 8 № 10 С. 53-55
Theoretical and experimental research results in the field of highly effective rod material's with low thermal conductivity microwave heat treatment technologies are presented. Rods made of polymeric composite materials are used as reinforcement in construction industry. Proposed microwave throughout the volume uniform heating method of the dielectric rod removes the internal thermal stresses in the ...
Added: February 13, 2015
Nefedov V. N., Saygin I., Хохлов М. Е. et al., T-Comm: Телекоммуникации и транспорт 2017 Т. 11 № 6 С. 33-38
В работе рассмотрены перспективы применения наукоёмких микроволновых технологий в процессах отверждения полимерных композиционных материалов на основе углеродных, базальтовых и стеклянных волокон. Применение энергии микроволнового излучения в качестве источника тепла позволяет реализовать качественно новый уровень производства композиционных материалов, характеризующийся экологической чистотой, энергетической эффективностью и высокой скоростью технологических процессов. Экспериментальные исследования отверждения полимерных композиционных материалов проведены в ...
Added: August 2, 2017
Методы снижения уровня побочных излучений микроволновых устройств термообработки листовых материалов
Nefedov V. N., Nazarov I., Simonov V., Технологии электромагнитной совместимости 2014 № 4 С. 44-48
Methods for decreasing spurious radiation for microwave devices intended for thermal treatment of sheet materials are considered. Microwave installation is created on the basis of sections slow –wave structure with variable parameter. To reduce spurious emissions to slow the system of microwave devices were placed in special screen mesh. It is shown that spurious radiation ...
Added: January 19, 2015
Nefedov V. N., Afanas'ev V. V., Ryabikina I. G., , in : 2018 International Conference on Actual Problems of Electron Devices Engineering (APEDE). : Саратов : IEEE, 2018. P. 371-375.
The results of the microwave radiation influence of the electromagnetic field oscillation frequency of 2450 MHz on the process of curing thermosetting epoxy resins, which are used as a binder in the production of polymer composite materials based on basalt, glass and carbon fibers, are presented. It is shown that the density of the cured ...
Added: October 30, 2018
Nefedov V. N., Mamontov A. V., Simonov V. et al., Измерительная техника 2015 № 10 С. 53-55
Theoretical and experimental research results in the field of high-performance microwave technologies of sheet materialsare presented. Sections of two-dimensional periodic slow-wave systems are used as heating elements. Divergence of theoretical and experimental temperature distribution characteristics in the sheet material does not exceed 3%, and the temperature deviation in the material from the nominal temperature value ...
Added: February 9, 2016
Mamontov A. V., Nefedov V. N., Simonov V., T-Comm: Телекоммуникации и транспорт 2014 Т. 8 № 10 С. 56-59
Theoretical and experimental research results in the field of highperformance microwave technologies of sheet materials' with small dielectric losses thermal treatment are presented. To increase the electric field decay constant amplitude in the material with small dielectric losses sections of twodimensional periodic slowwave systems are used as heating elements. The microwave construction is based on ...
Added: February 13, 2015
Nefedov V. N., Mamontov A. V., Simonov V. et al., T-Comm: Telecommunications and transport 2017 Vol. 11 No. 2 P. 52-55
Theoretical results of curing antennas made of composite materials using electromagnetic field of super high frequencies as a source of heat energy are presented. The advantages of microwave heat treatment of the antenna made of carbon fiber with epoxy binder in comparison with traditional methods are presented. Results of theoretical studies on the accelerated curing ...
Added: July 19, 2017
Измерение температуры стенок композитных труб при термообработке в СВЧ-установках типа бегущей волны
Nefedov V. N., Mamontov A. V., Simonov V., Измерительная техника 2016 № 8 С. 45-48
Предложен метод построения микроволновых установок, формирующих равномерное распределение температуры по поперечному сечению диэлектрических труб. Рассмотрен способ расчёта распределения температуры по толщине труб из полимерных композиционных материалов. ...
Added: September 15, 2016
Nefedov V. N., Мамонтов А. В., Simonov V. et al., Измерительная техника 2018 № 3 С. 42-46
The method of construction of the radial type microwave devices forming the uniform temperature distribution in the volume of polymer composite pipes is suggested. The results of theoretical and experimental studies of the temperature distribution along the thickness of the pipe material are presented. The advantages of microwave technology for the curing of polymeric composite ...
Added: April 16, 2018
Nefedov V. N., Mamontov A. V., Simonov V. et al., T-Comm: Телекоммуникации и транспорт 2016 Т. 10 № 9 С. 5-8
Представлены теоретические результаты отверждения параболической антенны из полимерных композиционных материалов с использованием в качестве источника тепла энергии электромагнитного поля сверхвысоких частот. Показаны преимущества микроволнового метода тепловой обработки антенн из углеродного волокна с эпоксидным термоотверждающимся связующим по сравнению с традиционными методами. Приведены результаты теоретических исследований по ускоренному отверждению антенн из полимерных композиционных материалов в микроволновой установке ...
Added: July 19, 2017
Mamontov A. V., Nefedov V. N., Nazarov I. et al., Измерительная техника 2021 № 4 С. 44-48
The actual problem of accelerating and reducing the energy costs of the foam concrete slabs heat treatment technological process is considered. It is shown that to solve this problem, it is advisable to use the microwave radiation energy as a heat source. The main advantages of the microwave method of foam concrete slabs heat treatment ...
Added: May 15, 2021
Nefedov V. N., Mamontov A. V., Simonov V. et al., Measurement Techniques 2018 Vol. 61 No. 3 P. 265-270
A method is proposed for constructing radial type microwave devices forming a uniform temperature distribution throughout the volume of pipes made of polymer composite materials The results of theoretical and experimental investigations of the temperature distribution across the thickness of the pipe material are given. The advantages of microwave technologies for curing polymer composite aterials ...
Added: October 9, 2018
Nefedov V. N., Banov D. K., Bushuev V. D., , in : 2018 International Conference on Actual Problems of Electron Devices Engineering (APEDE). : Саратов : IEEE, 2018. P. 381-386.
The main parameters of beam-type microwave installation with frequency of the electromagnetic field oscillations 2450 MHz, the microwave output power of 4,8 kW for the heat treatment of a carbon fiber parabolic antenna, with heat-resistant epoxy binder, of the aperture diameter 1200 mm, thickness 5 mm are presented. The main results of the temperature distribution ...
Added: October 31, 2018
Mamontov A. V., Nefedov V. N., Simonov V., Measurement Techniques 2015 No. Volume 58, Issue 10 P. 1156-1159
The results of theoretical and experimental investigations in the area of high performance microwave technologies for the heat treatment of sheet materials are presented. Two-dimensional periodic slow-wave systems are used as the heating elements of the microwave devices. The disagreement between the theoretical and experimental temperature distribution characteristics in the sheet material and the temperature ...
Added: February 9, 2016
Nefedov V. N., Mamontov A. V., Saygin I., , in : 2016 International Conference on Actual Problems of Electron Devices Engineering (APEDE). : Саратов : IEEE, 2016. P. 436-441.
The results of theoretical and experimental research in the field of high-performance microwave technology for the heat treatment of core material with low thermal conductivity are presented. The microwave method allows uniform heating of the dielectric rod throughout the volume, leads to the completeness of the polymerization reaction and high strength characteristics of the resulting ...
Added: October 24, 2016
Pudalov V., Vlasenko V., Pervakov K. et al., IEEE Transactions on Applied Superconductivity 2019 Vol. 29 No. 3 P. 6900505-1-5
The FeSe wires and tapes with Fe (S22 steel) and Cu/Nb sheath were fabricated by various modifications of the
powder-in-tube (PIT) method. The superconducting critical parameters (upper critical field, critical current, critical temperature) depending on heat treatment time were investigated using resistive R(T) and transport measurements I (V) in magnetic fields up to 9T. The low-temperature ...
Added: November 26, 2019
Nefedov V. N., Махмудов С. А., , in : 2018 International Conference on Actual Problems of Electron Devices Engineering (APEDE). : Саратов : IEEE, 2018. P. 376-380.
A model and method for calculating the temperature distribution of a wide range of materials in a microwave beam-type unit taking into account the reflective walls of the chamber is supposed. The experimental and modeling characteristics of the temperature distribution over the thickness of a homogeneous dielectric material at different distances from the walls of ...
Added: October 30, 2018
Nefedov V. N., Mamontov A. V., Simonov V., Measurement Techniques 2016 Vol. 59 No. 8 P. 856-860
A design is proposed for microwave systems which produce a uniform temperature distribution over the transverse cross section of dielectric pipes. A method for calculating the temperature distribution over the thickness of pipes made of composite materials is examined. ...
Added: December 5, 2016
Nefedov V. N., Life Science Journal 2014 Vol. 11 No. 8 P. 512-515
Mainstreams of microwave technologies’ development and applications both in Russia and abroad are presented. Such directions as energetic efficiency of microwave technologies, ceramics and polymer heat treatment, basalt melting, drying of thermo-insulating materials, treatment of wastage are examined. Experimental studies were carried out on the electromagnetic field frequency oscillations of 2450 MHz. Polymer composite materials' ...
Added: May 13, 2014
Пенза : ПГУ, 2018
Представлены доклады ХХIII Международного симпозиума «Надежность и качество», проходившего с 21 по 31 мая 2018 г. в г. Пензе.
Рассмотрены актуальные проблемы теории и практики повышения надежности и качества; эффективности внедрения инновационных и информационных технологий в фундаментальных научных и прикладных исследованиях, образовательных и коммуникативных системах и средах, экономике и юриспруденции; методов и средств анализа и прогнозирования ...
Added: May 24, 2018
Dyachkova I. G., Mamontov A. V., Monakhov I. et al., Кристаллография 2020 Т. 65 № 4 С. 640-643
Dependences of the resistivity of metal-containing nanocomposite films with molybdenum, hafnium, chromium, vanadium, tungsten and tantalum nanoparticles on the content of the introduced metals have been studied. An increase in the conductivity of diamond-like films (DLFs) with an increase in the metal content is found. Depending on the introduced metal, the concentration dependences of the ...
Added: September 15, 2020
M. : Association of graduates and employees of AFEA named after prof. Zhukovsky, 2018
The materials of The International Scientific – Practical Conference is presented below.
The Conference reflects the modern state of innovation in education, science, industry and social-economic sphere, from the standpoint of introducing new information technologies.
It is interesting for a wide range of researchers, teachers, graduate students and professionals in the field of innovation and information technologies. ...
Added: May 24, 2018