?
Ultrahigh modal gain in stripe injection lasers and microlasers based on InGaAs/GaAs quantum dots
Kvantovaya Elektronika. 2022. Vol. 52. No. 7. P. 593–596.
Zubov F. I., Shernyakov Y. M., Gordeev N. Y., Mintairov S. A., Kalyuzhnyy N. A., Maximov M. V., Kryzhanovskaya N., Moiseev E., Nadtochiy A., Zhukov A.
Lasers of different designs (stripe lasers and lasers with a half-disk cavity) based on InGaAs quantum dots formed by a mechanism different from the Stransky – Krastanov growth are studied. The possibility of lasing on the fundamental optical transition at record-high (134 – 153 cm–1) optical losses is demonstrated. The saturated modal gain is estimated to be 45 cm–1 per quantum dot layer, which exceeds the values typical for conventional quantumdot lasers by several times.
Dmitriev A., Kornilov V., Batienkov R., Lecture Notes in Civil Engineering 2026 Vol. 886 P. 249–255
Numerous studies have provided compelling evidence that the probability distribution of avalanche sizes follows a power law, and that 1/f noise is present in the stochastic dynamics of landslides. We present a theoretical explanation of these phenomena within the framework of self-organized criticality theory, proposing a discrete-time model in the form of a sandpile cellular ...
Added: October 13, 2026
Dmitriev A., Shulman I., Lebedev A., Studies in Computational Intelligence 2026 Vol. 1265 P. 266–273
A discrete-time model is presented for the self-organization of the X/Twitter social network to the edge of a phase transition, characterized by avalanche-like propagation of information in the network. The model is based on the analogy between the critical dynamics of the X social network and sandpile cellular automata with Manna rule on the Chung-Lu ...
Added: October 13, 2026
Arutyunov K., Kharitonov I. A., Petrosyants K. O., JETP Letters 2026 Vol. 124 No. 6 P. 1–16
Superconducting properties of metallic micro- and nanowires can be entirely different from those of bulk superconductors. Of particular interest is the nonequilibrium current-induced state of a quasi-one-dimensional superconducting channel. The most interesting phenomenon here is the stepped I–V characteristic, explained by a process known as phase slip center activation. If the origin of such step-like ...
Added: October 13, 2026
Makarov D. M., Kalikin N., Fashchevsky K. A. et al., Electrochimica Acta 2026 Vol. 579 Article 150159
Machine learning (ML) has become a powerful tool for accelerating the development of carbon-based supercapacitors;
however, most published models assume that a single predictive framework can describe both conventional
porous carbons and hybrid carbon electrodes. Here, we test this assumption using a comprehensive
benchmark dataset and an extended literature-curated dataset enriched with synthesis- and electrolyte-related
descriptors. Three ML algorithms ...
Added: October 13, 2026
Махлуф М., Ozhegov R., Elezov M. et al., Фотоника 2026 Vol. 20 No. 6 P. 414–423
This paper compares the ranging precision of direct time-of-flight (dToF) and non-line-of-sight (NLOS) LiDAR architectures, both using a superconducting nanowire single-photon detector (SNSPD). Both systems operate at 1550 nm with a 50 ps pulsed laser and time-correlated single-photon counting (TCSPC). The dToF configuration achieved approximately 100 µm precision at 10 m, while the NLOS configuration achieved 500 µm precision for ...
Added: October 12, 2026
Singapore: Springer, 2026.
This volume presents the Proceedings of the 34th IUPAP Conference on Computational Physics (CCP2023), held in Kobe, Japan on August 4–8, 2023. It offers a collection of peer-reviewed articles that highlight recent developments in computational and simulation research across various areas of physics. Key topics include the use of data science, quantum computing, and machine ...
Added: October 12, 2026
Goncharov A., Chibisov A., Advanced Theory and Simulations 2023 Vol. 12 No. 13 Article 2200816
Designing stable quantum computers with the ability to correct errors responsibly requires a detailed understanding of the physical processes that underlie these devices. In this study, detailed quantum mechanical simulations of the atomic structure, charge distribution of electron density, and distribution and orientation of magnetic and quantum states as a function of applied external pressure ...
Added: October 11, 2026
Chibisov A., Gnidenko A., Chibisova M. et al., FlatChem 2023 Vol. 41 Article 100533
Manufacturing precise quantum computers with small errors in quantum operations, long coherence times, and low power consumption is the most important challenge in modern nanoelectronics. To understand the operating modes of such calculators in detail, both the optimal arrangement of the qubit system within the structure and changes in its magnetic properties must be comprehensively ...
Added: October 11, 2026
Li Y., Han J., Zaman N. et al., ACS Applied Materials & Interfaces 2026 Vol. 18 No. 39 P. 54241–54251
The development of lead sulfide (PbS) quantum dot (QD) photodetectors for short-wave infrared (SWIR) applications has been fundamentally limited by the thermodynamic instability of large PbS QD facets, which leads to aggregation and epitaxial fusion. In this work, robust thermodynamic stabilization was achieved by introducing methylammonium chloride (MACl) in PbS QD surface passivation, as validated ...
Added: September 26, 2026
Бабичев А. В., Makhov I., Kryzhanovskaya N. et al., Оптика и спектроскопия 2026 Т. 134 № 3 С. 272–277
Представлены результаты по реализации генерации при повышенных температурах в лазерах с длиной волны генерации 980 nm на основе вертикального микрорезонатора с использованием непоглощающих на длине волны оптической накачки зеркал. Минимальная пороговая мощность накачки составила ~0.8 mW и соответствовала температуре 150 K. Добротность микрорезонатора, определенная на пороге генерации, превысила 13000. Максимальная рабочая температура микролазера составила 195 ...
Added: September 25, 2026
Бабичев А. В., Makhov I., Kryzhanovskaya N. et al., Письма в Журнал технической физики 2026 Т. 52 № 12 С. 40–43
Реализована одночастотная генерация при 300 K в лазерах на основе вертикального микрорезонатора. Для лазеров с полупроводниковым выводным зеркалом пороговая плотность мощности накачки составила 6.5 kW/cm2. Добротность микрорезонатора и длина волны излучения, определенные на пороге генерации, равнялись 8800 и ~ 959.8 nm. Применение конструкции микрорезонатора с гибридным выводным зеркалом позволило повысить добротность микрорезонатора (до 12 360) ...
Added: September 25, 2026
Бабичев А. В., Makhov I., Kryzhanovskaya N. et al., Письма в Журнал технической физики 2026 Т. 52 № 18 С. 30–34
Представлены результаты реализации генерации при комнатной температуре в планарных вертикальных микрорезонаторах на основе зеркал Al0.2Ga0.8As/Al0.9Ga0.1As. При 300 K пороговая плотность мощности и добротность на пороге генерации составили 11.4± 0.7 kW/cm2 и 5070± 160 соответственно. Двукратное превышение порога генерации привело к увеличению добротности микрорезонатора до 19 000. Эффективный латеральный теплоотвод подтвержден малым сдвигом энергии кванта, который составил ...
Added: September 25, 2026
Liang Y., Zhang X., Wang Q. et al., ACS Applied Nano Materials 2026 Vol. 9 No. 32 P. 15224–15232
The development of high-light-yield scintillators based on perovskite quantum dots (PQDs) is hindered by their intrinsic instability and aggregation, which severely limits their long-term operational reliability and integration into polymeric matrices. Silica coating has been demonstrated as an effective strategy to enhance the stability of PQDs. However, achieving fast and uniform silica encapsulation on individual ...
Added: August 27, 2026
Касимов Р. Х., Аржанов А. И., Седых К. О. et al., Оптический журнал 2026 Т. 93 № 1 С. 80–86
Предмет исследования. Использование метода капельного нанесения для изготовления источника одиночных фотонов. Цель работы. Разработка технологического процесса изготовления источника одиночных фотонов на коллоидных квантовых точках для использования их в фотон- ных интегральных схемах. Метод. На первом этапе в программе ANSYS Lumerical рассчитыва- ются период и фактор заполнения фокусирующих элементов связи на длинах волн 545 и 600 ...
Added: July 31, 2026
Babichev A., Bobrov M., Vasil'ev A. et al., Applied Physics Letters 2026 Vol. 128 No. 24 Article 241102
High-quality planar cavities with low-absorption mirrors based on Al0.2Ga0.8As/Al0.9Ga0.1As layers demonstrate continuous wave lasing at a wavelength of 956 nm. At 300 K, the threshold power density and the quality-factor at the threshold are 4.2 kW/cm2 and 6800. Increasing the pump level above two thresholds results in an enlargement in the quality-factor to at least 19 ...
Added: July 8, 2026
Babichev A., Makhov I., Kryzhanovskaya N. et al., IEEE Journal on Selected Topics in Quantum Electronics 2026 Vol. 32 No. 6 Article 1700208
Micropillar cavity lasers demonstrate operation up to 255 K. At this temperature, the lasing threshold and Q-factor, extracted at lasing threshold for a 4 μm diameter pillar are about 2 mW and 16800. For pillar lasers, the concept of which is based on an optical aperture, continuous-wave lasing is realized at room temperature (300 K). ...
Added: March 23, 2026
Бабичев А. В., Makhov I., Kryzhanovskaya N. et al., Письма в Журнал технической физики 2025 № 21 С. 58–62
Продемонстрирована генерация в микролазерах на основе вертикального микрорезонатора при температуре 244 K. Пороговая поглощенная оптическая мощность, длина волны генерации и добротность микролазера с диаметром 4 µm составили ∼ 2.8 mW, 989 nm и 12 000 соответственно. Минимальная пороговая поглощенная оптическая мощность (250 µW) соответствует температуре 168 K. ...
Added: March 13, 2026
Babichev A., Blokhin A., Zadiranov Y. et al., Applied Physics Letters 2026 Vol. 128 No. 5 Article 051105
High-quality micropillar cavities were grown using molecular-beam epitaxy. Stable continuous-wave lasing at room temperature was demonstrated for microlasers with semiconductor and hybrid output mirrors. At 300 K, single-mode lasing was demonstrated for micropillars with a diameter of 5 um at a wavelength of 960 nm, with a minimum lasing threshold of 1.2 mW and the ...
Added: March 13, 2026
S.D. Komarov, Vainilovich A. G., G.A. Feigin et al., St. Petersburg Polytechnical University Journal: Physics and Mathematics 2025 Vol. 18 No. 3.1 P. 209–213
Fabrication, optical study, and mode modeling of III-N microdisk resonators with InGaN/GaN quantum wells on Al2O3 are presented. It is shown that the created epitaxial structures have high optical quality, and the microresonators support high-Q whispering gallery modes. ...
Added: December 11, 2025
Zhukov A., Moiseev E., Makhov I. et al., Письма в Журнал технической физики 2025 Т. 51 № 20 С. 32–35
The dynamic characteristics of an InGaAs/GaAs quantum dot microring laser were investigated using small-signal high-frequency current modulation at 55 °C. The maximum modulation bandwidth was 3.7 GHz, and the energy consumption during optical transmission was estimated to be 4.2–6.4 pJ/bit. The temperature dependencies of the parameters affecting the speed of operation (K-factor, threshold current, current ...
Added: October 29, 2025
Пеетерс Ф. М., Mahdavifar M., Khoeini F., Journal of Applied Physics 2024 Vol. 136 Article 184301
The impact of vacancies on spin-resolved electronic properties of quantum dots (QDs) in phosphorene-based junctions is investigated numerically. Regardless of the crystal orientation, a phosphorene nanoribbon containing a monovacancy is found to exhibit a topological quasi-flatband that emerges within the bandgap. The electronic properties of QDs, including spatial confinement and energy level distribution, can be ...
Added: September 15, 2025