?
Использование инжекционно-термической обработки для уменьшения дефектности диэлектрических пленок МДП-структур
Перспективные материалы. 2025. № 5. С. 17–23.
Das A., Saikia J., Maji N. et al., ChemNanoMat 2026 Vol. 12 No. 5 Article e202500733
Developing efficient photoactive materials from bio-derived resources is vital yet challenging for achieving effective water splitting performance. In this work, nano carbon dots (CDs) of zero-dimensional (0D) were synthesized from papaya peel through a simple and eco-friendly process and subsequently anchored onto the two-dimensional (2D) layered structure of graphitic carbon nitride (g-C3N4, GCN) at various ...
Added: June 2, 2026
Wary R. R., Mahato B., Sharma N. et al., The Journal of Physical Chemistry Letters 2026 Vol. 17 No. 17 P. 5099–5107
Development of heterojunction materials is an efficient approach for enhancing photocatalytic and photoelectrochemical processes. We develop a ZnO/CuO heterojunction via Cu doping into a ZnO matrix. Structural characterization confirmed that Cu was effectively incorporated into ZnO without any structural changes. The improved optical properties and reduced charge carrier recombination of the doped samples were confirmed ...
Added: June 2, 2026
Duran E. ., Pulgar A., Izquierdo R. et al., Physica Status Solidi (A) Applications and Materials 2026 Vol. 223 No. 7 Article e202500942
Ceramic superconductors exhibit remarkable properties, including zero electrical resistance and potent magnetic behavior, operating at temperatures as high as the boiling points of liquid nitrogen (77 K) and liquid hydrogen (20 K). These characteristics position them as key enablers for sustainable technologies spanning electric propulsion, lossless energy transmission, advanced medical imaging, and quantum computation. This review presents ...
Added: June 1, 2026
Jiang Q., Fang J., Chen J. et al., Science China Information Sciences 2026 Vol. 69 No. 6 Article 162402
Resonators based on nanoelectromechanical systems (NEMS) using two-dimensional (2D) materials with high-quality factors and excellent electrical control are critical for tunable coherent phonon dynamics, resonant sensors and wireless communications. However, their performance is fundamentally limited by the lack of a unified framework governing energy dissipation mechanisms and their electrical tunability. Here, we synergistically modulate both ...
Added: May 28, 2026
Jin S., Komarov M. M., Scientific Reports 2026
Intrabody communication (IBC) channels offer physiological diversity that can be leveraged for passive biometric identification in wearable devices. Recent reports of over 99 per cent identification accuracy have frequently resulted from data leakage, where samples from the same subject are seen in both training and evaluation, yielding inflated and unreliable metrics. In this work, we ...
Added: May 21, 2026
Андреев Д. В., Корнев С. А., Bondarenko G. et al., Перспективные материалы 2026 № 6 С. 5–11
Выполнено сравнительное исследование процессов сильнополевой зарядовой
деградации подзатворного диэлектрика структур металл-диэлектрик-полупроводник (МДП)
с алюминиевым и поликремниевым затвором. Зарядовые явления в МДП-структурах
изучали методом сильнополевой инжекции электронов в диэлектрик в режиме возрастания
плотности стрессового инжекционного тока с кратковременными переключениями
в измерительный режим при постоянной низкой плотности инжекционного тока.
Использование данного метода позволило получить новые данные о процессах зарядовой
деградации подзатворного диэлектрика МДП-структур с ...
Added: May 21, 2026
Rathish S., Andrey S. Vasenko, Thazhathenair A. et al., The Journal of Physical Chemistry Letters 2026 Vol. 17 No. 18 P. 5386–5394
We demonstrate and rationalize the effect of Au nanoparticles (NPs) on the hierarchical g-C3N4/CeO2 heterojunction. g-C3N4/CeO2 decorated with monodispersed plasmonic Au NPs was synthesized. Detailed analyses showed that CeO2 nanocubes and monodispersed Au NPs were evenly distributed over the 2D g-C3N4 surface, forming a robust interface enriched with abundant active sites. The structure enabled efficient separation of photogenerated charge ...
Added: May 16, 2026
Paul R., Das A., Sharma N. et al., Colloids and Surfaces A: Physicochemical and Engineering Aspects 2026 Vol. 728 Article 138830
Niobium-doped TiO2 (Nb-TiO2), demonstrates dual functionality as an efficient photocatalyst for dye degradation and a promising photoelectrocatalyst for water oxidation. Nb incorporation via a facile hydrothermal method was confirmed by XRD (Rietveld refinement), XPS, TEM, FT-IR, Raman, and BET analyses, indicating successful lattice doping and structural modification. Photocatalytic dye degradation experiments were conducted using a model ...
Added: May 16, 2026
Гущина В. А., / Series chemrxiv-2023-vpzhz-v2 "ChemRxiv". 2023.
All-inorganic perovskite CsPbBr3 and Cs4PbBr6 nanoparticles are being intensively studied due to their unique properties and wide range of applications; however, however, the nature of their optical properties is not yet fully understood due to the difficulty of synthesis of singlephase nanoparticles. In this article we describe the features of the synthesis of single-phase particles ...
Added: May 14, 2026
Гущина В. А., Mendeleev Communications 2025 Vol. 35 No. 2 P. 193–195
All-inorganic perovskite CsPbBr3 and Cs4PbBr6 nanoparticles are intensively studied for their unique optical properties, though synthesizing single-phase nanoparticles has posed challenges. Detailed synthesis method of CsPbBr3 and Cs4PbBr6 single-phase nanoparticles and their chemical and phase analysis are described. Distinctive optical characteristics, such as photoluminescence, optical band gap and the Urbach tail region, are revealed and explained within the current ...
Added: May 14, 2026
Гущина В. А., Physics of Complex System 2026 Vol. 7 No. 1 P. 3–15
Heterostructures based on ZnO nanorods and CsPbBr3 nanocrystals were investigated for their potential as semiconductor SERS substrates. We found that ZnO morphology governs the efficiency of interfacial energy transfer, leading to enhanced photoluminescence under 390 nm excitation and a noticeable reduction of the bandgap in the composites. Raman analysis revealed a pronounced intensity enhancement and ...
Added: May 14, 2026
Вишняков Г. Н., Yurin A., Minaev V. et al., Измерительная техника 2026 Т. 75 № 2 С. 46–57
The problems of metrological assurance for measuring the refractive index of solid optical materials (silicon, germanium, etc.) used in the infrared range of the spectrum (infrared materials) are considered. The refractive index of optical materials in the infrared wavelength range must be known with high accuracy when developing optics for thermal imagers, night vision devices, ...
Added: May 14, 2026
Методика оценки функциональной безопасности маршрутизаторов на основе вероятностно-физической модели
Polesskiy S., Tumkovskiy S., Tsvetkov V. et al., Информационно-управляющие системы 2026 № 2 С. 49–60
The functional safety of network routers used in critical information infrastructure requires quantitative assessment based on dependability data. Existing safety assessment methods do not account for the influence of physical degradation mechanisms under real operating conditions, which reduces the credibility of the results and complicates the adoption of well-founded engineering decisions. Purpose: Is to improve ...
Added: May 12, 2026
Гущина В. А., Russian Journal of Inorganic Chemistry 2024 Vol. 69 No. 6 P. 940–948
Currently, ABX3 nanoparticles (NPs) based on lead halides attract the attention due to their unique optical properties and a wide range of applications. The preparation of NPs with lead as a partial or complete replacement is particularly interesting because of the toxicity of this chemical element and most of its compounds. In this study, we propose a ...
Added: May 6, 2026
Yasnitsky L., Голдобин М. А., Мезенцев А. С., Прикладная математика и вопросы управления 2025 № 2 С. 99–116
Представлен обзор современных методов и основанных на них программных
инструментах, применяемых для математического моделирования серийных производственных процессов с целью снижения брака и повышения качества производимых изделий. Перечисляются группы работ, нацеленных на обнаружение и классификацию дефектов, работ, в которых решаются задачи прогнозирования образования дефектов и определения значимости параметров, работ направленных на поиск
оптимального сочетания технологических параметров изготовления изделий, ...
Added: May 5, 2026
Morozov E. V., Demin A. S., Borovitskaya I. V. et al., Inorganic Materials: Applied Research 2026 Vol. 17 No. 3 P. 619–626
This article presents the results of experiments on the impact of powerful pulsed ion-plasma and
electron flows generated in the working chamber of the Plasma Focus PF-5M installation during each highvoltage
discharge on a model aluminum alloy B95. It is shown that the general characteristics of the alloy’s
damage upon exposure to pulsed flows of helium ions (HI) ...
Added: May 4, 2026
Honolulu: IEEE, 2025.
International Conference on Computer Vision Workshops (ICCVW), Honolulu, HI, USA, 2025 ...
Added: May 3, 2026
Solovyev Roman A., Telpukhov Dmitry, Shafeev I. et al., Technologies 2026 Vol. 14 No. 3 Article 169
With the continuous scaling of semiconductor design technologies, evaluating static IR drop has become a critical bottleneck in the physical synthesis flow. This paper presents a machine learning-based framework that transforms the power delivery network (PDN) analysis problem into an image-to-image translation task using a U-Net architecture with MaxViT and EfficientNet encoders. By implementing a ...
Added: May 3, 2026
Dayoub A., Suleiman E., IEEE, 2026.
2026 8th International Youth Conference on Radio Electronics, Electrical and Power Engineering (REEPE)
1-3 April 2026 ...
Added: April 30, 2026
М.: РТУ МИРЭА, 2024.
В сборнике опубликованы работы, представленные на Международной научно-технической конференции «Перспективные материалы и технологии» («ПМТ–2024»), а также работы ведущих ученых и специалистов, занимающихся созданием новых инновационных оптических материалов, исследованиями в области оптоэлектронных и оптоволоконных систем.
Сборник трудов может быть полезен для научных работников и инженеров, работающих по смежным научным направлениям, а также для аспирантов и студентов технических ...
Added: April 29, 2026
М.: РТУ МИРЭА, 2025.
Перспективные материалы и технологии (ПМТ-2025) : Сборник докладов Национальной научно-технической конференции с международным участием, Москва, 07–12 апреля 2025 года. – Москва: МИРЭА - Российский технологический университет, 2025. – 1820 с. ...
Added: April 29, 2026
Andreev D. V., Kornev S. A., G. G. Bondarenko et al., Inorganic Materials: Applied Research 2025 Vol. 16 No. 5 P. 1301–1305
Injection-thermal treatment (ITT) of MIS structures in the mode of stepwise increase in highfield
injection current density bounded by the value of Jb, at which no noticeable processes of irreversible
charge degradation of the gate dielectric and its interface with the semiconductor occur, is under consideration.
The charge density injected into the gate dielectric during ITT should provide ...
Added: September 12, 2025
Andreev D., Gennady G. Bondarenko, Andreev V. et al., , in: Proceedings of 2022 IEEE Moscow Workshop on Electronic and Networking Technologies (MWENT).: M.: IEEE, 2022. P. 1–3.
In modern microelectronics high fields are an essential condition of devices based on metal-insulator-semiconductor (MIS) structures what is caused by downscaling of nodes of semiconductor manufacturing processes. Under these conditions, a possibility of charge degradation increases what can result in dielectric film breakdown and following integrated circuit (IC) failure. Therefore, a designing of configurable set ...
Added: August 31, 2022
Andreev D. V., Bondarenko G.G., Andreev V. V. et al., Journal of Physics: Conference Series 2021 Vol. 1740 Article 012034
We have modeled the charge effects in radiation MOS sensors functioning in a wide range of electric fields including high-field injection of electrons into the dielectric film. In order to study the charge effects taking place in MOS sensors, we use an extended model suggested by us previously. The extended model, besides the accumulation of ...
Added: January 26, 2021