Molecular dynamics simulations of the mechanical annealing process in metallic glasses: Effects of strain amplitude and temperature
Molecular dynamics simulations are performed to examine the dynamic response of amorphous solids to oscillatory shear at finite temperatures. The data were collected from a poorly annealed binary glass, which was deformed periodically in the elastic regime during several hundred shear cycles. We found that the characteristic time required to reach a steady state with a minimum potential energy is longer at higher temperatures and larger strain amplitudes. With decreasing strain amplitude, the asymptotic value of the potential energy increases but it remains lower than in quiescent samples. The transient decay of the potential energy correlates well with a gradual decrease in the volume occupied by atoms with large nonaffine displacements. By contrast, the maximum amplitude of shear stress oscillations is attained relatively quickly when a large part of the system starts to deform reversibly.
The quantum nuclear effects are studied in water using centroid molecular dynamics (CMD) method. The aim is the calibration of CMD implementation in LAMMPS. The calculated intramolecular energy, atoms gyration radii and radial distribution functions are shown in comparison with previous works. The work is assumed to be the step toward to solution of the discrepancy between the simulation results and the experimental data of liquid n-alkane properties in our previous works.
Different test methods are described to determine the mechanical properties of materials in the superplastic state. The flow stress depends on strain and strain rate, the structural parameter of the materials, and temperature. The rheology and mechanics of superplastic deformation are discussed. The methods have been checked for reliability and produced good results in testing titanium alloys and constructing mathematical models as part of an order submitted by the company EADS (Airbus). The information given on the test methods and the subsequent approximation of materials’ mechanical properties is of considerable interest for making reliable predictions of the deformation of materials during shaping operations. © 2015 Springer Science+Business Media New York
It is well recognized that excessive ice accumulation at low-temperature conditions can cause significant damage to civil infrastructure. The passive anti-icing surfaces provide a promising solution to suppress ice nucleation and enhance ice removal. However, despite extensive efforts, it remains a challenge to design anti-icing surfaces with low ice adhesion. Using all-atom molecular dynamics (MD) simulations, we show that surfaces with single-walled carbon nanotube array (CNTA) significantly reduce ice adhesion due to the extremely low solid areal fraction. It was found that the CNTA surface exhibits up to a 45% decrease in the ice adhesion strength in comparison with the atomically smooth graphene surface. The details of the ice detachment from the CNTA surface were examined for different water-carbon interaction energies and temperatures of the ice cube. Remarkably, the results of MD simulations demonstrate that the ice detaching strength depends linearly on the ratio of the ice-surface interaction energy and the ice temperature. These results open the possibility for designing novel robust surfaces with low ice adhesion for passive anti-icing applications.
Molecular-level knowledge of the thermodynamic, structural, and transport properties of water confined by interfaces and nanopores of various materials is crucial for quantitative understanding and prediction of many natural and technological processes, including carbon sequestration, water desalination, nuclear waste storage, cement chemistry, fuel cell technology, etc. Computational molecular modeling is capable to significantly complement the experimental investigations of such systems by providing invaluable atomic-scale information leading to improved understanding of the specific effects of the substrate structure and composition on the structure, dynamics and reactivity of interfacial and nano-confined aqueous solutions. This paper offers a brief overview of recent efforts to quantify some of these effects for individual H2O molecules and hydrated ions confined at the interfaces and in nanopores of several typical hydrophilic and hydrophobic materials. The first molecular layer of aqueous solution at all substrates is often highly ordered, indicating reduced translational and orientational mobility of the H2O molecules. This ordering cannot be simply described as “ice-like”, but rather resembles the behavior of supercooled water or amorphous ice, although with very significant substrate-specific variations.
In this work, we perform coexistence simulations of methane hydrates for pressures up to 5000 bar for different water models. We calculate the kinetic stability boundary of the superheated metastable sI structure and analyze the effects of the heating rate, system size and cage occupancy. We also report molecular dynamics simulation of several possible structuresfor the new hydrogen hydrate clathrate. We show the strength of molecular simulation as a supplement tool for the analysis of experimental data. © 2015 by Nova Science Publishers, Inc. All rights reserved.
Cooling of tokamak boundary plasma owing to radiation of non-fully stripped lithium ions is considered as a promising way for protection of plasma facing elements (PFE) in tokamak. It may be effectively realized when the main part of lithium ions are involved in the closed circuit of migration between plasma and PFE surface. Such an approach may be implemented with the use of lithium device whose hot (500-600 °C) area to be effected by plasma serves as a Li-emitter and the cold part (∼180 °C) as a Li-collector in the shadow. Capillary-pore system (CPS) provides the returning of collected and condensed lithium to emitting zone by capillary forces. The main goals of the last T-11M lithium experiments were investigating Li ions transport in the tokamak scrape of layer (SOL) and their collecting by different kinds of limiters. The design of devices based on lithium CPS with different ratio of emitting/collecting area is the main subject of this paper. © 2015 The Authors.
The application of mathematical modeling methods (with subsequent computer sales) to determine the parameters of accuracy geometry bands obtained with the new equipment and process the step deformation bands of hard alloys based on copper
This volume presents new results in the study and optimization of information transmission models in telecommunication networks using different approaches, mainly based on theiries of queueing systems and queueing networks .
The paper provides a number of proposed draft operational guidelines for technology measurement and includes a number of tentative technology definitions to be used for statistical purposes, principles for identification and classification of potentially growing technology areas, suggestions on the survey strategies and indicators. These are the key components of an internationally harmonized framework for collecting and interpreting technology data that would need to be further developed through a broader consultation process. A summary of definitions of technology already available in OECD manuals and the stocktaking results are provided in the Annex section.