?
Программные инструментальные средства для разработки мероприятий по снижению брака серийного производства
Прикладная математика и вопросы управления. 2025. № 2. С. 99–116.
Language:
Russian
Association for Computational Linguistics, 2026.
Added: May 19, 2026
Viacheslav K., Русский инженер 2024 № 3 С. 34–37
Analysis of various methods referred to the increasing energy efficiency and movement safety through the use of
control systems which take into account the force factors of interaction of the wheel propeller with the supporting surface. During
the analysis of methods dedicated to energy efficiency rise and were used techniques of logical and statistical analysis. There are
various ...
Added: May 19, 2026
Bezzubov S., Malikov D., Krasnov L. et al., Scientific data 2026 Vol. 13 Article 727
Solubility is a crucial property of organic compounds, impacting their potential applications in synthetic chemistry, materials science and drug design. Moreover, in technological processes mixtures of solvents are often utilized, making the solubility assessment more complicated. Predicting solubility values in mixtures of solvents from a molecular structure can help to address this issue, although a ...
Added: May 19, 2026
Pikalov V., Meshcheryakov V., Kondratev S. et al., Technologies 2026 Vol. 14 No. 1 P. 1–27
This paper presents Aerokinesis, an IoT-based software–hardware system for intuitive gesture-driven control of quadcopter unmanned aerial vehicles (UAVs), developed within the Robot Operating System 2 (ROS2) framework. The proposed system addresses the challenge of providing an accessible human–drone interaction interface for operators in scenarios where traditional remote controllers are impractical or unavailable. The architecture comprises ...
Added: May 19, 2026
Кондратьев С., Никитин Г. Э., Дырченкова Ю. А. et al., Technologies 2026 Vol. 14 No. 1 P. 1–27
This paper presents Aerokinesis, an IoT-based software–hardware system for intuitive gesture-driven control of quadcopter unmanned aerial vehicles (UAVs), developed within the Robot Operating System 2 (ROS2) framework. The proposed system addresses the challenge of providing an accessible human–drone interaction interface for operators in scenarios where traditional remote controllers are impractical or unavailable. The architecture comprises ...
Added: May 19, 2026
Springer, 2025.
This book constitutes the refereed proceedings of the 19th International Conference on Parallel Computational Technologies, PCT 2025, held in Moscow, Russia, during April 8–10, 2025.
The 31 full papers included in this volume were carefully reviewed and selected from 122 submissions. These papers were organized under the following topical sections: High Performance Architectures, Tools and Technologies; ...
Added: May 18, 2026
Ronglin Z., Wei L., Jiahong C. et al., Journal of Signal Processing Systems 2026 Vol. 98 P. 1–15
To address the need for lightweight and low-latency protection in massive resource-constrained 5G Internet of Things (IoT) systems, this paper proposes Key-Controlled Modulation Hopping and Constellation Rotation (KMHCR). KMHCR is designed as a physical-layer confidentiality-enhancement mechanism that avoids bit-wise full-payload encryption in the protection pipeline. It uses a shared key derived from channel-reciprocity secret key ...
Added: May 16, 2026
Suvorov N. M., Proceedings of the Institute for System Programming of the RAS 2026 Vol. 38 No. 3(2) P. 49–66
Data Petri Nets (DPNs) extend classical Petri nets to model processes where data directly influences control-flow, enabling a comprehensive view of system behavior and possibility to detect failure points that could otherwise be hidden. Soundness is a correctness criterion that captures such failure points as deadlocks and livelocks as well as model boundedness and absence ...
Added: May 16, 2026
The Journal of Physical Chemistry Letters 2026 Vol. 17 No. 18 P. 5386–5394
We demonstrate and rationalize the effect of Au nanoparticles (NPs) on the hierarchical g-C3N4/CeO2 heterojunction. g-C3N4/CeO2 decorated with monodispersed plasmonic Au NPs was synthesized. Detailed analyses showed that CeO2 nanocubes and monodispersed Au NPs were evenly distributed over the 2D g-C3N4 surface, forming a robust interface enriched with abundant active sites. The structure enabled efficient separation of photogenerated charge ...
Added: May 16, 2026
Das A., Paul R., Sharma N. et al., Colloids and Surfaces A: Physicochemical and Engineering Aspects 2026 Vol. 728 P. 138830
Niobium-doped TiO2 (Nb-TiO2), demonstrates dual functionality as an efficient photocatalyst for dye degradation and a promising photoelectrocatalyst for water oxidation. Nb incorporation via a facile hydrothermal method was confirmed by XRD (Rietveld refinement), XPS, TEM, FT-IR, Raman, and BET analyses, indicating successful lattice doping and structural modification. Photocatalytic dye degradation experiments were conducted using a model ...
Added: May 16, 2026
Гущина В. А., / Series chemrxiv-2023-vpzhz-v2 "ChemRxiv". 2023.
All-inorganic perovskite CsPbBr3 and Cs4PbBr6 nanoparticles are being intensively studied due to their unique properties and wide range of applications; however, however, the nature of their optical properties is not yet fully understood due to the difficulty of synthesis of singlephase nanoparticles. In this article we describe the features of the synthesis of single-phase particles ...
Added: May 14, 2026
Гущина В. А., Mendeleev Communications 2025 Vol. 35 No. 2 P. 193–195
All-inorganic perovskite CsPbBr3 and Cs4PbBr6 nanoparticles are intensively studied for their unique optical properties, though synthesizing single-phase nanoparticles has posed challenges. Detailed synthesis method of CsPbBr3 and Cs4PbBr6 single-phase nanoparticles and their chemical and phase analysis are described. Distinctive optical characteristics, such as photoluminescence, optical band gap and the Urbach tail region, are revealed and explained within the current ...
Added: May 14, 2026
Гущина В. А., Physics of Complex Systems, Russia 2026 Vol. 7 No. 1 P. 3–15
Heterostructures based on ZnO nanorods and CsPbBr3 nanocrystals were investigated for their potential as semiconductor SERS substrates. We found that ZnO morphology governs the efficiency of interfacial energy transfer, leading to enhanced photoluminescence under 390 nm excitation and a noticeable reduction of the bandgap in the composites. Raman analysis revealed a pronounced intensity enhancement and ...
Added: May 14, 2026
Neal N. X., Weiqing L., Dacheng H. et al., Algorithms 2026 Vol. 19 No. 5 P. 1–22
In the era of data-driven education, educational social networks generate large volumes of high-dimensional and complex-structured data through learner interactions, collaborative activities, and resource-sharing behaviors, posing significant challenges to traditional unsupervised learning methods. Such data often exhibit non-convex distributions, heterogeneity, and noise sensitivity, making conventional clustering approaches insufficient for capturing their intrinsic structural relationships. To ...
Added: May 13, 2026
Velichkov B., Nikolova-Koleva I., Slavcheva M., Shumen: INCOMA Ltd, 2025.
The RANLP 2025 Student Research Workshop (RANLPStud’2025) is a special track of the established international conference Recent Advances in Natural Language Processing (RANLP’2025).
The RANLPStud is being organised for the 9th time and this year is running in parallel with the other tracks of the main RANLP 2025 conference. The target of RANLPStud’25 is to be a ...
Added: May 12, 2026
Stepanyants V., Долгов И. М., Хорошилов Г. С. et al., Труды Института системного программирования РАН 2026 Т. 38 № 3 С. 95–110
Highly automated and connected vehicles are gradually entering the market. Currently, solutions are being proposed that allow these technologies to be used for cooperative driving automation, which can significantly improve traffic safety. Such technologies and their software should be tested to ensure safety before being implemented in real systems. Verification and validation of vehicular control ...
Added: May 12, 2026
Tikhonov R., Efendiev M. T., Fedotenkov A. A., 2026 International Russian Smart Industry Conference (SmartIndustryCon) 2026 P. 542–547
High-fidelity simulation environments like CARLA and ROS are essential for connected and automated vehicle research. They allow researchers to verify and validate new software and technology without the time, financial, and safety overheads of real-world testing. However, their operation requires considerable expertise for creating platform-specific scenario configuration files, which complicates the research workflow. This paper ...
Added: May 11, 2026
Los Alamitos: IEEE Computer Society, 2026.
It is a great pleasure for us to welcome you on behalf of the conference committees, to the 11th IEEE International Conference on Smart Cloud (IEEE SmartCloud 2026), we are glad that we can have this international conference in New York city, USA. Now, please allow us to introduce the IEEE SmartCloud 2026 conference. The ...
Added: May 10, 2026
Avdoshin S. M., Pesotskaya E. Y., Информационные технологии 2026 Т. 32 № 4 С. 185–194
With the rapid advancement of artificial intelligence, and deep learning in particular, models have emerged that are capable of delivering highly accurate predictions. However, the internal logic of such models remains difficult to interpret—an issue of critical importance, especially in domains where the correctness of an algorithm directly affects high-stakes decision-making. One promising avenue for ...
Added: May 8, 2026
Yasnitsky L., Голдобин М. А., Мезенцев А. С., Прикладная математика и вопросы управления 2025 № 2 С. 99–116
Представлен обзор современных методов и основанных на них программных
инструментах, применяемых для математического моделирования серийных производственных процессов с целью снижения брака и повышения качества производимых изделий. Перечисляются группы работ, нацеленных на обнаружение и классификацию дефектов, работ, в которых решаются задачи прогнозирования образования дефектов и определения значимости параметров, работ направленных на поиск
оптимального сочетания технологических параметров изготовления изделий, ...
Added: May 5, 2026
Zheng Y., Zheng T., Luo S. et al., Small 2025 Vol. 21 No. 39 Article e05659
A complementary passivation strategy employing the simultaneous use of phenylethylammonium iodide (PEAI) and ethylhydrazinoacetate hydrochloride (EHACl) is developed to mitigate multiple surface defects in perovskite films. PEAI mainly aims at vacancy defects and tends to induce quasi-2D/3D interface reconstruction, while rich Lewis base sites within EHACl enable it to selectively passivate Lewis acid defects such ...
Added: August 15, 2025
Yasnitsky L., Голдобин М. А., Прикладная информатика 2025 Т. 20 № 3(117) С. 85–100
Currently, artificial intelligence methods are widely used in the practice of serial production enterprises. They are used to detect defects, classify and eliminate them, identify the causes of defects, predict the quality and properties of the resulting product, select optimal parameters of the production process, and identify and study its patterns. However, outside the field ...
Added: July 10, 2025
Wu Y., Liu D., Chu W. et al., Nanoscale 2025 Vol. 17 No. 4 P. 2224–2234
Metal halide perovskites (MHPs) have attracted strong interest for a variety of applications due to their low cost and excellent performance, attributed largely to favorable defect properties. MHPs exhibit complex dynamics of charges and ions that are coupled in unusual ways. Focusing on a combination of two common MHP defects, i.e., a grain boundary (GB) ...
Added: November 28, 2024
Yasnitsky L., Черепанов Ф. М., Голдобин М. А. et al., Прикладная информатика 2023 Т. 18 № 6 С. 109–119
Abstract. Studies of the influence of the chemical composition of ore raw materials on
the properties of foundry products, as a rule, do not consider the features of production
processes. The main reasons for this are that, firstly, the results of such research are usually
limited to laboratory studies, secondly, the models do not take into account the ...
Added: February 4, 2024