?
Термообработка теплоизоляционного материала с использованием СВЧ излучения
С. 996–997.
Бессонов И. В., Bobrova E., Агафонова Н. З. et al., Транспортное строительство 2022 № 3 С. 32–34
The features of the technology of production of crushed stone from foam glass on specialized lines are described. The analysis of the sorption characteristics of the material was carried out, the dependences of humidity and thermal conductivity, the coefficient of thermal conductivity increment for each percentage of humidity were determined. The results of experimental research presented in the article show that the foam glass crushed stone manufactured on specialized ...
Added: March 20, 2023
Бессонов И. В., Zhukov A., Bobrova E. et al., Транспортное строительство 2022 № 2 С. 12–15
The purpose of the research was to determine the physical mechanical and thermal properties of foam glass
crushed stone, such as compaction coefficient, compressive
strength, thermal conductivity coefficient in dry
and wet conditions at various degrees
of compaction, sorption humidity, operational
density. The test results are given.
The expediency of using foam glass crushed
stone as bulk thermal insulation is substantiated ...
Added: March 20, 2023
Zhukov A., Гурьев В. В., Жолудов В. С. et al., М.: МИСИ – МГСУ, 2021.
The monograph summarizes and systematizes the results of experimental and theoretical studies of thermal insulation in industrial structures, technological facilities, pipelines and building structures. Modern types of thermal insulation materials based on heat-resistant gas-filled plastics, foamed glass, foamed rubber, aerogels and products made of mineral fibers are considered.
The basic ideas about the morphology of gas—filled ...
Added: January 31, 2023
Mamontov A. V., Nefedov V. N., Khritkin S. A., Измерительная техника 2022 № 6 С. 46–51
The actual problem of accelerating and reducing the energy costs of the sheet polymer composite material heat treatment technological process is considered. It is shown that to solve this problem, it is advisable to use the microwave radiation energy as a heating source. The main advantages of the microwave method of the sheet polymer composite ...
Added: October 24, 2022
Mamontov A. V., Nefedov V. N., Nazarov I. et al., Измерительная техника 2021 № 4 С. 44–48
The actual problem of accelerating and reducing the energy costs of the foam concrete slabs heat treatment technological process is considered. It is shown that to solve this problem, it is advisable to use the microwave radiation energy as a heat source. The main advantages of the microwave method of foam concrete slabs heat treatment ...
Added: May 15, 2021
Bobrova E., Zhukov A., Zelenshchikov D. B. et al., Advanced Materials, Structures and Mechanical Engineering, 2014.
Экономия энергии, сокращение выбросов углекислого газа, сохранение природной среды являются актуальными вопросами современного строительства. Ориентированное на будущее, экологически устойчивое строительство (ЭУС) означает необходимость в полной мере учитывать вопросы охраны окружающей среды, экологии и социальной защиты в процессах планирования и выполнения работ. Системы ЭУС реализованы в проектах, инициируемых ведущими фирмами, производящими теплоэффективные строительные изделия, в частности ...
Added: February 5, 2021
Mamontov A. V., Nefedov V. N., Khritkin S. A., Измерительная техника 2019 № 4 С. 57–61
A method for constructing traveling wave type microwave device with a transverse interaction, forming a uniform temperature distribution over the volume of polymer composite rods is proposed. The results of theoretical and experimental studies of the temperature distribution of the rod material are presented. Advantages of microwave technologies of curing of polymeric composite materials in ...
Added: September 3, 2019
Nefedov V. N., Измерительная техника 2019 № 5 С. 52–56
Предложен метод построения микроволновых установок с продольным взаимодействием. Установки такого типа формируют равномерное распределение температуры по поперечному сечению стержней из полимерных композиционных материалов. Представлены результаты теоретических и экспериментальных исследований распределения температуры по поперечному сечению материала стержня, а также параметры микроволновой установки. ...
Added: July 9, 2019
Nefedov V. N., Banov D. K., Bushuev V. D., , in: 2018 International Conference on Actual Problems of Electron Devices Engineering (APEDE).: Саратов: IEEE, 2018. P. 381–386.
The main parameters of beam-type microwave installation with frequency of the electromagnetic field oscillations 2450 MHz, the microwave output power of 4,8 kW for the heat treatment of a carbon fiber parabolic antenna, with heat-resistant epoxy binder, of the aperture diameter 1200 mm, thickness 5 mm are presented. The main results of the temperature distribution ...
Added: October 31, 2018
Nefedov V. N., Махмудов С. А., , in: 2018 International Conference on Actual Problems of Electron Devices Engineering (APEDE).: Саратов: IEEE, 2018. P. 376–380.
A model and method for calculating the temperature distribution of a wide range of materials in a microwave beam-type unit taking into account the reflective walls of the chamber is supposed. The experimental and modeling characteristics of the temperature distribution over the thickness of a homogeneous dielectric material at different distances from the walls of ...
Added: October 30, 2018
Nefedov V. N., Afanas'ev V. V., Ryabikina I. G., , in: 2018 International Conference on Actual Problems of Electron Devices Engineering (APEDE).: Саратов: IEEE, 2018. P. 371–375.
The results of the microwave radiation influence of the electromagnetic field oscillation frequency of 2450 MHz on the process of curing thermosetting epoxy resins, which are used as a binder in the production of polymer composite materials based on basalt, glass and carbon fibers, are presented. It is shown that the density of the cured ...
Added: October 30, 2018
Nefedov V. N., Mamontov A. V., Simonov V. et al., Measurement Techniques 2018 Vol. 61 No. 3 P. 265–270
A method is proposed for constructing radial type microwave devices forming a uniform temperature distribution throughout the volume of pipes made of polymer composite materials The results of theoretical and experimental investigations of the temperature distribution across the thickness of the pipe material are given. The advantages of microwave technologies for curing polymer composite aterials ...
Added: October 9, 2018
Nefedov V. N., Мамонтов А. В., Simonov V. et al., Измерительная техника 2018 № 3 С. 42–46
The method of construction of the radial type microwave devices forming the uniform temperature distribution in the volume of polymer composite pipes is suggested. The results of theoretical and experimental studies of the temperature distribution along the thickness of the pipe material are presented. The advantages of microwave technology for the curing of polymeric composite ...
Added: April 16, 2018
Nefedov V. N., Mamontov A. V., Simonov V. et al., Электронная обработка материалов 2017 Т. 53 № 4 С. 74–77
Представлены теоретические и экспериментальные результаты отверждения труб из полимерных композиционных материалов с использованием в качестве источника тепла энергии электромагнитного поля сверхвысоких частот. Показаны преимущества микроволнового метода тепловой обработки труб из полимерных композиционных материалов по сравнению с традиционными методами. Приведены результаты теоретических исследований по ускоренному отверждению полимерных композиционных труб в микроволновой установке лучевого типа в непрерывном ...
Added: September 18, 2017
Nefedov V. N., Saygin I., Хохлов М. Е. et al., T-Comm: Телекоммуникации и транспорт 2017 Т. 11 № 6 С. 33–38
В работе рассмотрены перспективы применения наукоёмких микроволновых технологий в процессах отверждения полимерных композиционных материалов на основе углеродных, базальтовых и стеклянных волокон. Применение энергии микроволнового излучения в качестве источника тепла позволяет реализовать качественно новый уровень производства композиционных материалов, характеризующийся экологической чистотой, энергетической эффективностью и высокой скоростью технологических процессов. Экспериментальные исследования отверждения полимерных композиционных материалов проведены в ...
Added: August 2, 2017
Nefedov V. N., Mamontov A. V., Simonov V. et al., T-Comm: Телекоммуникации и транспорт 2016 Т. 10 № 9 С. 5–8
Представлены теоретические результаты отверждения параболической антенны из полимерных композиционных материалов с использованием в качестве источника тепла энергии электромагнитного поля сверхвысоких частот. Показаны преимущества микроволнового метода тепловой обработки антенн из углеродного волокна с эпоксидным термоотверждающимся связующим по сравнению с традиционными методами. Приведены результаты теоретических исследований по ускоренному отверждению антенн из полимерных композиционных материалов в микроволновой установке ...
Added: July 19, 2017
Rumiantcev B. M., Zhukov A., Bobrova E. et al., В кн.: MATEC Web of Conferences. 5th International Scientific Conference “Integration, Partnership and Innovation in Construction Science and Education”. Moscow, Russia, October 16-17, 2016Т. 86.: [б.и.], 2016. Гл. 86.
Formation of effective insulation possible only taking into account features of the insulation layer in the construction and use of high quality materials, preserving their characteristics as in the early stages of operation, and for the entire billing period. The operational stability of the heat-insulating material is determined not only by its properties, but also ...
Added: March 3, 2017
Nefedov V. N., Mamontov A. V., Simonov V., Measurement Techniques 2016 Vol. 59 No. 8 P. 856–860
A design is proposed for microwave systems which produce a uniform temperature distribution over the transverse cross section of dielectric pipes. A method for calculating the temperature distribution over the thickness of pipes made of composite materials is examined. ...
Added: December 5, 2016
Simonov V., Chebykin A., Saygin I. et al., В кн.: X международная отраслевая научно-техническая конференция «Технологии информационного общества»: Сборник трудов.: М.: ИД Медиа Паблишер, 2016. С. 199–200.
Представлены теоретические результаты отверждения параболической антенны из полимерных композиционных материалов с использованием в качестве источника тепла энергии электромагнитного поля сверхвысоких частот. Показаны преимущества микроволнового метода тепловой обработки антенн из углеродного волокна с эпоксидным связующим по сравнению с традиционными методами. Приведены результаты теоретических исследований по ускоренному отверждению антенн из полимерных композиционных материалов в микроволновой установке лучевого ...
Added: December 5, 2016
Nefedov V. N., Mamontov A. V., Simonov V. et al., В кн.: X международная отраслевая научно-техническая конференция «Технологии информационного общества»: Сборник трудов.: М.: ИД Медиа Паблишер, 2016. С. 194–195.
Представлены теоретические и экспериментальные результаты тепловой обработки изделий из бетона с использованием в качестве источника тепла энергии электромагнитного поля сверхвысоких частот. Показаны преимущества микроволнового метода тепловой обработки бетона по сравнению с традиционными методами. Приведены результаты исследований по ускоренному твердению плиты из бетона в микроволновой установке лучевого типа.
Разработана микроволновая установка лучевого типа для ускоренного твердения плиты ...
Added: December 5, 2016