?
Измерение распределения температуры в полимерных трубах при их обработке с использованием микроволнового излучения
Измерительная техника. 2018. № 3. С. 42–46.
The method of construction of the radial type microwave devices forming the uniform temperature distribution in the volume of polymer composite pipes is suggested. The results of theoretical and experimental studies of the temperature distribution along the thickness of the pipe material are presented. The advantages of microwave technology for the curing of polymeric composite materials compared to traditional methods are shown.
Keywords: temperature distributionраспределение температурыисточник микроволновой энергииmicrowave power sourcemicrowave deviceмикроволновое устройствоэлектродинамическая системаMicrowave technologyelectrodynamic systemмикроволновая технологиякомпозиционный материалcomposite materials
Publication based on the results of:
Гущина В. А., / Series chemrxiv-2023-vpzhz-v2 "ChemRxiv". 2023.
All-inorganic perovskite CsPbBr3 and Cs4PbBr6 nanoparticles are being intensively studied due to their unique properties and wide range of applications; however, however, the nature of their optical properties is not yet fully understood due to the difficulty of synthesis of singlephase nanoparticles. In this article we describe the features of the synthesis of single-phase particles ...
Added: May 14, 2026
Pilé I., Deng Y., Shchur L., / Series arXiv "math". 2026. No. 2604.10254.
We investigate the spatial overlap of successive spin configurations in Markov chain Monte Carlo simulations using the local Metropolis algorithm and the Svendsen-Wang and Wolff cluster algorithms. We examine the dynamics of these algorithms for two models in different universality classes: the Ising model and the Potts model with three components. The overlap of two ...
Added: April 20, 2026
Chernyshov D., Satanin A., Shchur L., / Series arXiv "math". 2025.
We investigate the boundary separating regular and chaotic dynamics in the generalized Chirikov map, an extension of the standard map with phase-shifted secondary kicks. Lyapunov maps were computed across the parameter space (K,K(α, τ)) and used to train a convolutional neural network (ResNet18) for binary classification of dynamical regimes. The model reproduces the known critical ...
Added: November 21, 2025
Павленко В. И., Bondarenko G., Черкашина Н. И. et al., Перспективные материалы 2025 № 9 С. 22–31
Проведен синтез композитного материала на основе полиэтилена, карбида бора (B4C) и
оксида висмута (Bi2O3) методом совместный криогенного помола всех компонентов в среде
жидкого азота с дальнейшим прессованием. Изучено влияние криогенного помола на
распределение наполнителей в композите и дана оценка перспективности использования
данного метода, по сравнению с традиционными способами смешения компонентов
полимерных композитов. Исследования структуры и свойств готового композита проводили
методами сканирующей ...
Added: September 17, 2025
Kagan M., Silkin V. M., Efremov D. V., / Series arXiv "math". 2024. No. 2411.12836.
In this study, we analyze the dielectric function of high-Tc cuprates as a function of doping level, taking into account the full energy band dispersion within the CuO2 monolayer. In addition to the conventional two-dimensional (2D) gapless plasmon mode, our findings reveal the existence of three anomalous branches within the plasmon spectrum. Two of these branches ...
Added: November 27, 2024
Influence of anisotropy on the study of critical behavior of spin models by machine learning methods
Sukhoverkhova D., Shchur L., / Series arXiv "math". 2024. No. 2410.14523.
In this paper, we applied a deep neural network to study the issue of knowledge transferability between statistical mechanics models. The following computer experiment was conducted. A convolutional neural network was trained to solve the problem of binary classification of snapshots of the Ising model's spin configuration on a two-dimensional lattice. During testing, snapshots of ...
Added: October 21, 2024
Sotnikova A., Ivantsov M. I., Kulikov A. et al., International Journal of Hydrogen Energy 2024 Vol. 57 P. 1208–1220
Catalytic decomposition of methane is a promising process that allows the simultaneous production of hydrogen and carbon nanomaterials with no COx emissions. In this work, for the first time, the possibility of promoting Ni-containing composite materials based on an organic matrix of polyvinyl alcohol (PVA) with MgO was demonstrated. The amount of MgO promoter varied ...
Added: June 25, 2024
Mozolenko V., Fadeeva Marina, Shchur L., / Series arXiv "math". 2024. No. 2405.10865.
The development of new algorithms for simulations in physics is as important as the development of new analytical methods. In this paper we present a comparison of the recently developed microcanonical population annealing (MCPA) algorithm with the rather mature Wang-Landau algorithm. The comparison is performed on two cases of the Potts model exhibiting a first ...
Added: May 20, 2024
Goltsman G., Александр С., IEEE Transactions on Applied Superconductivity 2023 P. 1–5
We investigate dark counts in SNSPD with spatial resolution, using nanostrip-patterned devices with 50 Ohm matched coplanar waveguide - tapers. We found that the dark counts originate from one or several points along the strip, which we call 'weak points'. We found that the dark counts originating from different points can have different dependence of ...
Added: May 7, 2024
Kagan M., Аксёнов С. В., / Series Research Square "Research Suqare". 2024. No. 1.
We study different resonances (first of all of the Fano type) in the interference device formed by the Aharonov-Bohm ring with superconducting (SC) wire in the topologically nontrivial state playing a role of a bridge between top and bottom arms. We analyze Majorana modes on the ends of the SC wire and show that the collapse of the ...
Added: April 10, 2024
Kottsov S. Y., Voshkin A. A., A. E. Baranchikov et al., Journal of Molecular Liquids 2024 Article 124354
The immobilisation of ionic liquids (ILs) in porous solid matrices enables the design of ionogels, which are now regarded as a promising material in extraction science. Here, by the co-gelation of TMOS and MTMS in a commercially available ionic liquid, Aliquat 336 (A336Cl), a series of ionogels were synthesised with various levels of IL content ...
Added: February 27, 2024
Ребров Я. В., Glazkov V., Murtazoev A. F. et al., / Series cond-mat "arxiv.org". 2023.
Nabokoite family compounds ACu7(TeO4)(SO4)5Cl (A=Na, K, Cs, Rb) are one of the candidates for the evasive spin-liquid state predicted for highly-frustrated square kagome lattice (SKL). Their magnetic subsystem includes SKL layers decorated by additional copper ions. All members of this family are characterized by quite high Curie-Weiss temperatures (∼80−200 K), but magnetic ordering was reported ...
Added: January 29, 2024
Арбузов А. А., Можжухин С. А., Лотоцкий М. В. et al., Журнал прикладной химии 2023 Т. 96 № 2 С. 217–224
В работе приведены результаты исследования взаимодействия композитов MgH2 с графеноподобным
или никель-графеновым материалом, полученных механохимической обработкой в атмосфере водорода, с водой и растворами лимонной кислоты различной концентрации. Установлено, что взаимодействие водного раствора лимонной кислоты с композитами характеризуется высокой скоростью:
98%-ный выход водорода достигается при мольном соотношении MgH2:лимонная кислота = 1:1.
Разработано устройство для получения компримированного водорода из композитов, ...
Added: September 29, 2023
Shurakov A., Kaurova N., Belikov I. et al., / Series Physics "arxiv.org". 2022.
In this paper, we report on the method of nondestructive quality control that can be used in fabrication of GaAs high-speed electronics. The method relies on the surface potential mapping and enables rigid in vivo analysis of transport properties of an active electronic device incorporated into a complex integrated circuit. The study is inspired by ...
Added: September 15, 2023
Veselova V., Abramova A., Plyuta V. et al., Journal of Functional Biomaterials 2022 Vol. 13 No. 4 Article 233
This paper reports the results of the large-scale field testing of composite materials with antibacterial properties in a tropical climate. The composite materials, based on a cotton fabric with a coating of metal oxide nanoparticles (TiO2 and/or ZnO), were produced using high-power ultrasonic treatment. The antibacterial properties of the materials were studied in laboratory tests on ...
Added: January 26, 2023
Pugach N., Safonchik M. O., Belotelov V. et al., / Series "cond-mat". 2022. No. 2110.00369.
A detailed investigation of a superconducting spin-triplet valve is presented. This spin-valve consists of a superconducting film covering a metal with an intrinsic spiral magnetic order, which could result from competing isotropic exchanges or, if the crystal lattice breaks central symmetry, from asymmetric Dzyaloshinskii-Moriya exchange. Depending on the anisotropy, such a metal may change its ...
Added: November 16, 2022
Novikov S. V., / Series cond-mat "arxiv.org". 2022. No. 2209.14955.
Charge transport in amorphous semiconductors having spatially correlated exponential density of states (DOS) has been considered for the arbitrary behavior of the correlation function of random energies. Average carrier velocity is exactly calculated for the quasi-equilibrium (nondispersive) transport regime. For the symmetric exponential DOS with exponential tails for low and high energies and non-positive correlation ...
Added: November 1, 2022
Mamontov A. V., Nefedov V. N., Khritkin S. A., Измерительная техника 2022 № 6 С. 46–51
The actual problem of accelerating and reducing the energy costs of the sheet polymer composite material heat treatment technological process is considered. It is shown that to solve this problem, it is advisable to use the microwave radiation energy as a heating source. The main advantages of the microwave method of the sheet polymer composite ...
Added: October 24, 2022
V. O. Veselova, Gajtko O. M., Sipyagina N. A. et al., Russian Journal of Inorganic Chemistry 2022 Vol. 67 No. 11 P. 1861–1867
The possibility to prepare transparent scintillation composite materials based on SiO2 aerogels
with Bi4Ge3O12 filler has been shown for the first time. Effect of gelation catalysts (HF and ammonium
hydroxide), solvents (methanol, isopropanol, acetone, methyl cellosolve, and methyl lactate), and supercrit
ical drying conditions (CO2, alcohols) on transparency and textural properties of SiO2 aerogels has been stud
ied. A ...
Added: October 23, 2022
IEEE, 2022.
The reports of the scientific and technical conference reflected the results of theoretical and experimental research in the field of electrodynamics and microwave technology, microwave electronics, nanoelectronics, power electronics, semiconductor electronics, electric power engineering, systems of measuring and medical technology.The results of the study of resonator and slowing down systems, microwave devices, devices for vacuum, ...
Added: October 17, 2022
Cherevko A., Nikovskiy I., Nelyubina Y. et al., Polymers 2021 Vol. 13 Article 3881
Here we report new porous carbon materials obtained by 3D printing from photopolymer compositions with zinc- and nickel-based metal–organic frameworks, ZIF-8 and Ni-BTC, followed by high-temperature pyrolysis. The pyrolyzed materials that retain the shapes of complex objects contain pores, which were produced by boiling zinc and magnetic nickel particles. The two thus provided functionalities—large specific ...
Added: February 23, 2022
Ikhsanov R., Mazur E., Kagan M., / Series "Working papers by Cornell University". 2022. No. 2202.01452.
At present, the task of searching for compounds with a high superconducting transition temperature is a very relevant scientific direction. Usually, the calculation of is carried out by numerically solving the system of Eliashberg equations. In this paper, a set of programs for solving this system written in various forms on the imaginary axis is ...
Added: February 4, 2022
Mamontov A. V., Nefedov V. N., Nazarov I. et al., Measurement Techniques 2021 Vol. 64 No. 4 P. 314–318
This paper addresses the high-priority goal of reducing the energy cost of heat-treating foam concrete slabs. We show that this problem is best solved using microwaves as a heat source. We discuss the main advantages of microwave curing over traditional techniques for curing foam concrete slabs, and develop a design for a microwave foam concrete ...
Added: October 16, 2021
Budkov Y., Zavarzin S., Kolesnikov A. L., Journal of Physical Chemistry C 2021 Vol. 125 No. 38 P. 21151–21159
We formulate a general mean-field theory for a flat electric double layer in ionic liquids and electrolyte solutions with ions possessing static polarizability and a permanent dipole moment on a charged electrode. We establish a new analytical expression for electric double-layer differential capacitance, determining it as an absolute value of the ratio of the local ...
Added: September 16, 2021