?
Анализ конструктивных решений в зависимости от типа изоляционных материалов в дорожных покрытиях в многолетнемерзлых грунтах
Транспортное строительство. 2022. № 1. С. 14–17.
Бессонов И. В., Zhukov A., Bobrova E., Говряков И. С., Горбунова Э. А.
Language:
Russian
Das A., Saikia J., Maji N. et al., ChemNanoMat 2026 Vol. 12 No. 5 Article e202500733
Developing efficient photoactive materials from bio-derived resources is vital yet challenging for achieving effective water splitting performance. In this work, nano carbon dots (CDs) of zero-dimensional (0D) were synthesized from papaya peel through a simple and eco-friendly process and subsequently anchored onto the two-dimensional (2D) layered structure of graphitic carbon nitride (g-C3N4, GCN) at various ...
Added: June 2, 2026
Wary R. R., Mahato B., Sharma N. et al., The Journal of Physical Chemistry Letters 2026 Vol. 17 No. 17 P. 5099–5107
Development of heterojunction materials is an efficient approach for enhancing photocatalytic and photoelectrochemical processes. We develop a ZnO/CuO heterojunction via Cu doping into a ZnO matrix. Structural characterization confirmed that Cu was effectively incorporated into ZnO without any structural changes. The improved optical properties and reduced charge carrier recombination of the doped samples were confirmed ...
Added: June 2, 2026
Duran E. ., Pulgar A., Izquierdo R. et al., Physica Status Solidi (A) Applications and Materials 2026 Vol. 223 No. 7 Article e202500942
Ceramic superconductors exhibit remarkable properties, including zero electrical resistance and potent magnetic behavior, operating at temperatures as high as the boiling points of liquid nitrogen (77 K) and liquid hydrogen (20 K). These characteristics position them as key enablers for sustainable technologies spanning electric propulsion, lossless energy transmission, advanced medical imaging, and quantum computation. This review presents ...
Added: June 1, 2026
Андреев Д. В., Корнев С. А., Bondarenko G. et al., Перспективные материалы 2026 № 6 С. 5–11
Выполнено сравнительное исследование процессов сильнополевой зарядовой
деградации подзатворного диэлектрика структур металл-диэлектрик-полупроводник (МДП)
с алюминиевым и поликремниевым затвором. Зарядовые явления в МДП-структурах
изучали методом сильнополевой инжекции электронов в диэлектрик в режиме возрастания
плотности стрессового инжекционного тока с кратковременными переключениями
в измерительный режим при постоянной низкой плотности инжекционного тока.
Использование данного метода позволило получить новые данные о процессах зарядовой
деградации подзатворного диэлектрика МДП-структур с ...
Added: May 21, 2026
Rathish S., Andrey S. Vasenko, Thazhathenair A. et al., The Journal of Physical Chemistry Letters 2026 Vol. 17 No. 18 P. 5386–5394
We demonstrate and rationalize the effect of Au nanoparticles (NPs) on the hierarchical g-C3N4/CeO2 heterojunction. g-C3N4/CeO2 decorated with monodispersed plasmonic Au NPs was synthesized. Detailed analyses showed that CeO2 nanocubes and monodispersed Au NPs were evenly distributed over the 2D g-C3N4 surface, forming a robust interface enriched with abundant active sites. The structure enabled efficient separation of photogenerated charge ...
Added: May 16, 2026
Paul R., Das A., Sharma N. et al., Colloids and Surfaces A: Physicochemical and Engineering Aspects 2026 Vol. 728 Article 138830
Niobium-doped TiO2 (Nb-TiO2), demonstrates dual functionality as an efficient photocatalyst for dye degradation and a promising photoelectrocatalyst for water oxidation. Nb incorporation via a facile hydrothermal method was confirmed by XRD (Rietveld refinement), XPS, TEM, FT-IR, Raman, and BET analyses, indicating successful lattice doping and structural modification. Photocatalytic dye degradation experiments were conducted using a model ...
Added: May 16, 2026
Гущина В. А., / Series chemrxiv-2023-vpzhz-v2 "ChemRxiv". 2023.
All-inorganic perovskite CsPbBr3 and Cs4PbBr6 nanoparticles are being intensively studied due to their unique properties and wide range of applications; however, however, the nature of their optical properties is not yet fully understood due to the difficulty of synthesis of singlephase nanoparticles. In this article we describe the features of the synthesis of single-phase particles ...
Added: May 14, 2026
Гущина В. А., Mendeleev Communications 2025 Vol. 35 No. 2 P. 193–195
All-inorganic perovskite CsPbBr3 and Cs4PbBr6 nanoparticles are intensively studied for their unique optical properties, though synthesizing single-phase nanoparticles has posed challenges. Detailed synthesis method of CsPbBr3 and Cs4PbBr6 single-phase nanoparticles and their chemical and phase analysis are described. Distinctive optical characteristics, such as photoluminescence, optical band gap and the Urbach tail region, are revealed and explained within the current ...
Added: May 14, 2026
Гущина В. А., Physics of Complex System 2026 Vol. 7 No. 1 P. 3–15
Heterostructures based on ZnO nanorods and CsPbBr3 nanocrystals were investigated for their potential as semiconductor SERS substrates. We found that ZnO morphology governs the efficiency of interfacial energy transfer, leading to enhanced photoluminescence under 390 nm excitation and a noticeable reduction of the bandgap in the composites. Raman analysis revealed a pronounced intensity enhancement and ...
Added: May 14, 2026
Гущина В. А., Russian Journal of Inorganic Chemistry 2024 Vol. 69 No. 6 P. 940–948
Currently, ABX3 nanoparticles (NPs) based on lead halides attract the attention due to their unique optical properties and a wide range of applications. The preparation of NPs with lead as a partial or complete replacement is particularly interesting because of the toxicity of this chemical element and most of its compounds. In this study, we propose a ...
Added: May 6, 2026
Yasnitsky L., Голдобин М. А., Мезенцев А. С., Прикладная математика и вопросы управления 2025 № 2 С. 99–116
Представлен обзор современных методов и основанных на них программных
инструментах, применяемых для математического моделирования серийных производственных процессов с целью снижения брака и повышения качества производимых изделий. Перечисляются группы работ, нацеленных на обнаружение и классификацию дефектов, работ, в которых решаются задачи прогнозирования образования дефектов и определения значимости параметров, работ направленных на поиск
оптимального сочетания технологических параметров изготовления изделий, ...
Added: May 5, 2026
Morozov E. V., Demin A. S., Borovitskaya I. V. et al., Inorganic Materials: Applied Research 2026 Vol. 17 No. 3 P. 619–626
This article presents the results of experiments on the impact of powerful pulsed ion-plasma and
electron flows generated in the working chamber of the Plasma Focus PF-5M installation during each highvoltage
discharge on a model aluminum alloy B95. It is shown that the general characteristics of the alloy’s
damage upon exposure to pulsed flows of helium ions (HI) ...
Added: May 4, 2026
Ершов И. А., Системная инженерия и инфокоммуникации 2025 № 4 С. 11–14
The heat consumption of residential buildings is a stochastic series. It is necessary for the design of thermal energy regulators the creation of a neural network model. In the paper, the model is carried out based on Long Short-Term Memory (LSTM). The high accuracy of reproducing the series was achieved by training the model on ...
Added: April 22, 2026
Pavlenko V. I., Bondarenko G.G., Cherkashina N. I. et al., Inorganic Materials: Applied Research 2026 Vol. 17 No. 2 P. 276–282
A composite material based on polyethylene, boron carbide (B4C), and bismuth oxide (Bi2O3) is
synthesized by the method of joint cryogenic milling of all components in liquid nitrogen environment followed
by pressing. The effect of cryogenic milling on the distribution of fillers in a composite is studied and
the prospects of using this method are assessed in comparison ...
Added: April 9, 2026
Черкашина Н. И., Павленко В. И., Bondarenko G. et al., Перспективные материалы 2026 № 4 С. 14–26
В данной работе представлен синтез гибкого полимерного композита для защиты от радиации на основе каучуковой матрицы и оксидов редкоземельных металлов, таких как Dy2O3 и Gd2O3, предназначенного для создания радиационно-защитных экранов и средств индивидуальной защиты. Исследованы его физико-механические характеристики: составы с добавлением оксида диспрозия имеют плотность от 1,31 до 2,44 г/см3, предел прочности при растяжении от ...
Added: April 2, 2026
Бессонов И. В., Bobrova E., Агафонова Н. З. et al., Транспортное строительство 2022 № 3 С. 32–34
The features of the technology of production of crushed stone from foam glass on specialized lines are described. The analysis of the sorption characteristics of the material was carried out, the dependences of humidity and thermal conductivity, the coefficient of thermal conductivity increment for each percentage of humidity were determined. The results of experimental research presented in the article show that the foam glass crushed stone manufactured on specialized ...
Added: March 20, 2023
Бессонов И. В., Zhukov A., Bobrova E. et al., Транспортное строительство 2022 № 2 С. 12–15
The purpose of the research was to determine the physical mechanical and thermal properties of foam glass
crushed stone, such as compaction coefficient, compressive
strength, thermal conductivity coefficient in dry
and wet conditions at various degrees
of compaction, sorption humidity, operational
density. The test results are given.
The expediency of using foam glass crushed
stone as bulk thermal insulation is substantiated ...
Added: March 20, 2023
Klimenkova O., Shchur L., Journal of Physics: Conference Series 2021 Vol. 1740 No. 012030 P. 1–5
We propose a novel algorithm for the construction of the sparse, nonetheless, the massive and rigid structure. The generated structures possess two significant properties reminiscent of the metallic foams. Firstly, the weight of the structures can be as low as the percent of the bulk one. Secondly, the structures are mechanically rigid. The structures are ...
Added: January 22, 2021