?
Proceedings - 25th ISSAT International Conference on Reliability and Quality in Design 2019
2019.
Academic editor: H. Pham
Kuskova V., Zaytsev D., , in : Proceedings - 25th ISSAT International Conference on Reliability and Quality in Design 2019. : [б.и.], 2019. P. 142-145.
Data Envelopment Analysis (DEA), a linear programming technique, is becoming increasingly popular in management studies. A variety of extensions have been proposed since its first introduction in the late 1970s, and lately, the idea of using the tool for clustering data has received some attention in the literature. We have further extended the idea of ...
Added: December 10, 2019
Zaytsev D., Kuskova V., , in : Proceedings - 25th ISSAT International Conference on Reliability and Quality in Design 2019. : [б.и.], 2019. P. 228-232.
In this paper we describe the Data Envelopment Analysis (DEA) research design and its applications for effectiveness evaluation of company marketing strategies. We argue that DEA is an efficient instrument for use in academia and industry to compare a company’s business performance with its competitors’. This comparison provides the company with information on the closest ...
Added: December 10, 2019
Priority areas:
IT and mathematics
Language:
English
Ivanova E., Vishnekov A., Ицкович А. И., Качество. Инновации. Образование 2014 № 12 С. 72-79
The paper describes basic steps of designing the enterprise computer network. The whole process presented as a sequence of decision making problems in case of multicriteriality. Proposed approach of the computer networks design in case of ambiguity initial information, and taking into account the possible further development of the enterprise’s infrastructure and its business activity. ...
Added: February 4, 2015
Zhadnov V. V., , in : Innovative Information Technologies: Materials of the International scientific-practical conference. Part 3. * 3.: M. : HSE, 2014. P. 233-238.
Considered are the questions of influence of quality of Technical Systems on the reliability of their Elements. It is shown that the improvement of the quality Systems affect the structure of the models of field failure rate. An example of the influence of quality of Cooling System of the model structure of the failure rate ...
Added: April 18, 2014
Zhadnov V. V., Iofin A. A., , in : Modern Problems of Radio Engineering, Telecommunications and Computer Science: Proceedings of the International Conference TCSET’2014 Dedicated to the 170th Anniversary of Lviv Polytechnic National University. : Lviv : Видавництво Національного університету “Львівська політехніка”, 2014. P. 226-228.
In this paper the comparative characteristics of the РС ASONIKA-K and PМ of reliability calculations are given. ...
Added: February 25, 2014
Ivanova E., Vishnekov A., Вестник компьютерных и информационных технологий 2013 № 12 С. 59-64
The article examines the decision support methods used in the software design in accordance with the State standard GOST 19.102–77 and GOST R ISO/IEC 9126–93. The main stages of the software products design are analysed: the first – technical specifications development, the second – project development, the third – software testing.
A basic project choice is ...
Added: November 21, 2013
ХНУ імені В. Н. Каразіна, 2012
Рассмотрены проблемы динамики и прочности машин, повышения качества и надежности технических систем и технологических процессов, а также экономические и образовательные аспекты этих процессов. ...
Added: March 12, 2015
Dordrecht, L., Cham, Heidelberg, NY : Springer, 2014
DepCoS – RELCOMEX is an annual series of conferences organized by Wrocław University of Technology to promote a comprehensive approach to evaluation of system performability which is now commonly called dependability. In contrast to classic analyses which were concentrated on reliability of technical resources and structures built from them, dependability is based on multi-disciplinary approach to ...
Added: July 8, 2014
Utenkov V. M., Shirshov A. G., Bykov P. et al., Journal of Machinery Manufacture and Reliability 2017 Vol. 46 No. 6 P. 589-595
A procedure for the computer-aided modeling of the side surface of a milled groove is presented. The procedure is based on dissecting the groove surface with parallel planes and building 2D sections in each of these planes. The mathematical model used for the purpose makes it possible to separately account for the shifts and tilts ...
Added: November 29, 2019
Чекмарев А. В., Azarov V., Информатизация образования и науки 2011 № 4(12) С. 86-93
The article presents results of use of conflicts quantitative analysis, arising during IT projects realization and evaluation of their use for appraisal according to Capability Maturity Model Integration. ...
Added: November 18, 2013
Zhadnov V. V., Зотов А. Н., Вестник компьютерных и информационных технологий 2020 Т. 17 № 6 С. 31-41
This article discusses problems of importing data from system of CAD (Computer-Aided Design) to dependability prediction software. Characteristics of dependability of electronic modules to a large extent define reliability of electronic equipment which contains them. Dependability of electronic modules is established on the early stages of engineering and is usually calculated by special software. Obviously, ...
Added: May 31, 2020
Туханова В. Ю., Издание государственного политехнического университета, 2022
The article presents the study of the process of the designing packages of materials to ensure the high level of quality and high competitiveness of the light industry products of the Russian Federation. The article concerned to the question of the use of recycling for the manufacture of nonwovens from the position of competitiveness of ...
Added: October 11, 2022
Aminev D., Журков А. П., Kulygin V. et al., Проектирование и технология электронных средств 2016 № 3 С. 43-49
It is the structure of a distributed radio direction finding system (RDFS), consisting of the local control station (LCS), 12 unmanned remotely located radio terminals (RRT) and communication channels between them. The theoretical basis for determining the reliability and optimization of spare parts is acquisition. The problem of determining the parameters of grade RDFS. Compiled ...
Added: April 15, 2017
Wien : DAAAM International Publishing, 2014
Added: December 10, 2014
Комплексный метод оценки показателей безотказности радиотехнических устройств космической аппаратуры
Korolev P., Известия высших учебных заведений. Приборостроение 2021 Т. 64 № 4 С. 316-328
The paper presents the method for evaluating the electronic devices reliability indicators of spacecraft equipment. The method taking into account the following factors: the effectiveness of the quality management system functioning; compliance of the design results with the technical specification requirements; additional tests quality of the electronic devices; the quality of the implementation of the ...
Added: May 11, 2021
Dordrecht, L., Cham, Heidelberg, NY : Springer, 2013
DepCos-RELCOMEX is an annual series of conferences organized by the Institute of Computer Engineering, Control and Robotics (CECR), Wroclaw University of Technology, since 2006.
Contemporary technical systems are integrated unities of technical, information, organization, software and human resources. Diversity of the processes being realized in the system, their concurrency and their reliance on in-system intelligence significantly impedes ...
Added: November 29, 2013
Ometov A., Petrov V., Bezzateev S. et al., IEEE Network 2019 Vol. 33 No. 2 P. 82-88
The unprecedented proliferation of smart devices together with novel communication, computing, and control technologies have paved the way for A-IoT. This development involves new categories of capable devices, such as high-end wearables, smart vehicles, and consumer drones aiming to enable efficient and collaborative utilization within the smart city paradigm. While massive deployments of these objects ...
Added: October 31, 2019
Trubochkina N. K., Мир техники кино 2019 Т. 1 № 1(13) С. 8-14
As a digital artist’s tools, the following digital imaging technologies were considered in the article: creating abstract images using a neural network without an input image, base don’t he artist’s psycho-emotional state; creation of images using a neural network - a stylist, at the entrance of which there is a base image and a stylization ...
Added: April 22, 2019
Artyukhova M. A., Polesskiy S., , in : Инновации на основе информационных и коммуникационных технологий: Материалы международной научно-практической конференции (2013). : М. : МИЭМ НИУ ВШЭ, 2013. Ch. 0,3010. P. 500-503.
Consider the dependence of coefficient of quality equipment from a variety of factors and its influence on the reliability of modern software and hardware systems. In terms of reliability software and hardware systems are serial connection elements. For them, the prediction model of the failure rate in the mode of operation depends on the technical ...
Added: November 7, 2013
Bankov D., Khorov E., Lyakhov A. et al., Journal of Communications Technology and Electronics 2019 Vol. 64 No. 8 P. 880-889
The development of wireless communication technologies attracts increased interest to scenarios that impose severe restrictions on data transmission reliability and latency. Such scenarios include real-time applications, such as industrial automation, remote control, video streaming, and virtual reality. It is very difficult to satisfy the requirements imposed on the quality of service with the currently widespread ...
Added: October 1, 2019
Shalumov A. S., Tikhomirov M. V., Shalumov M. A., European journal of natural history 2012 No. 5 P. 31-34
An automated system for ensuring reliability and quality of the equipment (ASONIKA) can help realize computer-aided design and an integrated computer simulation of highly reliable radio electronic means (REM) of moving objects in accordance with the requirements of CALS-technologies at the stages of engineering-production-exploitation. ...
Added: October 13, 2013
Zhadnov V. V., Polesskiy S., Russian Electrical Engineering 2020 Vol. 91 No. 7 P. 262-267
One promising trend in making voltage converters more reliable is to design them on the basis of backbone modular architecture, combined redundancy, and rotation of main and backup power channels. A technique is proposed for this converter for calculating the upper and the lower failsafe operation probability estimates that is based on using the standardized ...
Added: October 19, 2020
Dagaev D., Rudyak V., / Высшая школа экономики. Series EC "Economics". 2016. No. WP BRP 129/EC/2016.
We evaluate the sporting effects of the seeding system reform in the major football club tournament - the Champions League - organized by the Union of European Football Associations (UEFA). In the UEFA Champions League, before the 2015-16 season, the teams were seeded in the group stage with respect to their ratings. Starting from the ...
Added: March 25, 2016
Туханова В. Ю., Научный журнал «Костюмология» (Journal of Clothing Science), Российская Федерация 2021 Т. 6 № 2 С. 1-14
This article provides an overview of existing methods for assessing the quality of garments at the stage of design. The article considers the absolute, product-oriented, consumer-oriented, producer-oriented and value-based approaches to classification of quality criteria for the design and manufacturing of light industry products. The author analyzed traditional models for assessing the quality of garments, ...
Added: August 19, 2021
Kiselyova N. N., Dudarev V.A., Korzhuev M. A., Inorganic Materials: Applied Research 2016 Vol. 7 No. 1 P. 34-39
A database (DB) on the bandgap of inorganic substances available via the Internet (http://bg.imetdb.ru) was developed for the information service of specialists in the sphere of inorganic chemistry and materials science. The DB is integrated with other information systems on the properties of inorganic substances and materials, which provides the search of a wide range ...
Added: February 23, 2016
М. : National Instruments Russia, 2017
Содержание сборника составляют доклады с результатами оригинальных исследований и технических решений, ранее не публиковавшиеся. Мы надеемся, что предлагаемый сборник окажется полезным для специалистов, работающих в различных областях науки и техники, для широкого круга преподавателей, аспирантов и студентов ВУЗов, а также для преподавателей средних школ и технических колледжей. ...
Added: May 10, 2017