?
Автоматизация моделирования тепловых процессов печатных узлов с использованием радиаторов
Автоматизация. Cовременные технологии. 2017. Т. 71. № 4. С. 162-166.
Шалумов М. А., Shalumov A. S., Шалумова Н. А., Kofanov Y. N.
Research target:
Electronics and Electrical Engineering
Priority areas:
engineering science
Language:
Russian
Shalumov A. S., Шалумова Н. А., Тихомиров М. В. et al., Динамика сложных систем 2013 № 2 С. 84-91
In article results and prospects of development of the automated system of maintenance of reliability and quality of equipment ASONIKA, and also integration with system ANSYS are considered ...
Added: October 14, 2013
Manohin A., Шалумова Н. А., Чабриков С. В. et al., Наукоемкие технологии 2011 Т. 12 № 11 С. 44-53
In the article are esteemed assigning and main capabilities of the subsystem of the analysis and maintenance of thermal values of designs of radio electronic means ASONIKA-T, and also principles of simulation of thermal processes in designs with the help of the subsystem ASONIKA-T. The example of simulation of thermal processes in a standard design is ...
Added: January 31, 2013
Shalumov A. S., Ивашко В. М., Малютин Н. В. et al., Мн. : ВА РБ, 2014
В монографии представлены совместные мсследования Научной школы «Автоматизированная система обеспечения надёжности и качества аппаратуры АСОНИКА» (руководитель: профессор Кофанов Ю.Н. Национального исследовательского университета «Высшая школа экономики» Российской Федерации), и ученых Учреждения образования «Военная академия Республики Беларусь». Рассмотрен комплекс вопросов, связанных с созданием автоматизированной системы АСОНИКА, обеспечением виртуализации испытаний и стойкости к воздействию дестабилизирующих факторов при эксплуатации ...
Added: March 18, 2015
Semenenko A. N., Керре П. О., Роткевич А. С. et al., Динамика сложных систем 2013 Т. 7 № 1 С. 35-41
In article an example of application of the system ASONIKA at the design of radio-electronic means is considered. The formulation of the problem and steps of the solution are presented. ...
Added: November 19, 2013
Semenenko A. N., Linetskiy B., Ivanov I. et al., Динамика сложных систем 2014 Т. 8 № 5 С. 3-9
In article technique of application of the system ASONIKA in modeling of thermal processes of units and printed circuit boards is presented. Also in article an example of calculation of the unit and printed circuit board for thermal effects under steady-state and no steady-state modes in according to the technique described in the system ASONIKA ...
Added: December 11, 2014
Shalumov A. S., Чабриков С. В., Шалумова Н. А., Динамика сложных систем 2012 Т. 6 № 2 С. 103-108
In article possibilities of a subsystem of the analysis and maintenance of thermal characteristics of designs of radio-electronic means ASONIKA on construction of thermal models at which there is a heat exchange by radiation are considered. Subsystem possibilities on construction of thermal models of designs of the radio-electronic means containing radiators of cooling of semi-conductor ...
Added: November 26, 2012
Rotkevich A., Semenenko A. N., Динамика сложных систем 2013 Т. 7 № 1 С. 35-42
In article an example of application of the system ASONIKA at the design of radio-electronic means is considered. The formulation of the problem and steps of the solution are presented. ...
Added: November 24, 2015
Kofanov Y. N., Zhadnov V. V., М. : Московский институт электронного машиностроения, 1990
Подробно излагается один из основных вопросов теории надежности радиоэлектронных средств (РЭС) - анализ и обеспечение их безотказности при проектировании на основе применения аппарата чувствительности. Уделено внимание вопросам автоматизированного проектирования РЭС. Описываются методы получения функций чувствительности, моделирования случайных процессов изменения параметров элементов и выходных характеристик РЭС, методы получения показателей безотказности и оценок степени влияния различных факторов ...
Added: January 3, 2014
Zhadnov V. V., Artyukhova M. A., Надежность 2015 № 1 С. 13-18
The article deals with forecasting the dependability indicators of state-of-the-art spacecraft onboard equipment. The authors demonstrate the applicability of the results of equipment and components testing for resistance to ionizing radiation in forecasting dependability indicators. They prove the applicability of Alfa distribution of time to failure in forecasting CMOS IC reliability and longevity. The paper ...
Added: January 20, 2015
Рязанов А. Н., Бутусов И. Ю., Кузубов С. В. et al., Вестник Воронежского государственного технического университета 2012 Т. 8 № 8 С. 96-99
In this paper we study the temperature regimes of power LEDs for use in various types of light-emitting devices. It is shown that the use of thermoelectric coolingbatteries for high-power LEDs are not very effective. The most significant contribution to LED cooling is achieved by increasing the size of the radiator. The results of this ...
Added: June 5, 2013
Попов П. О., Shalumov A. S., Чан С. Т. et al., Динамика сложных систем 2013 № 1 С. 42-45
In article the basic approaches to the organisation of modelling of physical processes of radio-electronic means within the limits of virtual design office are considered. ...
Added: October 13, 2013
Kaperko A., Nedosekin P., Датчики и системы 2020 № 6 С. 45-51
In this work, a study of a coaxial diamond sensor for registration of protons and electrons is carried out. The process of interaction of charged particles in the volume of the sensor is simulated in the energy range: from 25 MeV to 200 MeV for protons and from 300 keV to 5 MeV for electrons. ...
Added: June 22, 2021
Zhadnov V. V., Зотов А. Н., Вестник компьютерных и информационных технологий 2020 Т. 17 № 6 С. 31-41
This article discusses problems of importing data from system of CAD (Computer-Aided Design) to dependability prediction software. Characteristics of dependability of electronic modules to a large extent define reliability of electronic equipment which contains them. Dependability of electronic modules is established on the early stages of engineering and is usually calculated by special software. Obviously, ...
Added: May 31, 2020
Мн. : Издательство Военной академии Республики Беларусь, 2013
Added: October 13, 2013
Polesskiy S., Artyukhova M. A., Reliability: Theory & Applications 2012 Vol. 7 No. 4 P. 90-101
The paper describes the calculation method of reliability and conservability products class of chemical current sources (CCS) in the design to the specific conditions in the electronic means. The technical specification for the indicators of CCS reliability are for specific operation modes and their use in the calculation gives a large error. In the U.S. ...
Added: February 7, 2013
Bondarenko G., Fisher M. R., Kristya V. I., Journal of Physics: Conference Series 2012 Vol. 406 No. 012031 P. 1-6
Simulation of electron, ion and metastable excited atom motion and interactions in a low-current discharge between the flat electrodes of a gas- discharge device in argon-mercury mixture is fulfilled. Also influence of gas temperature on both densities and fluxes of particles has been investigated. Distributions of the particle densities along the discharge gap under different ...
Added: January 17, 2013
Kofanov Y. N., М. : Энергоатомиздат, 2014
В данной монографии изложены основы менеджмента качества и надёжности радиоэлектронных средств (РЭС), соответствующие требованиям международных стандартов ИСО серии 9000. Рассмотрены требования современных информационных технологий моделирования к системам менеджмента качества и надёжности РЭС. Показана необходимость введения комплексного менеджмента, обусловленного появлением новой информации в результате комплексного моделирования взаимосвязанных физических процессов в РЭС. Новая информация позволяет создавать РЭС ...
Added: March 29, 2015
Запорожье : ЗМИ, 1992
Added: April 5, 2014
Лемешко Н. В., М. : МИЭМ, 2012
В учебном пособии рассмотрены основы проектирования элементов топологии тонкопленочных гибридных интегральных микросхем. Освещены вопросы расчета пассивных элементов ГИС, принципы проектирования топологии, даны справочные материалы, необходимые для топологического и конструкторского проектирования ГИС. ...
Added: November 29, 2012
Kechiev L., Шатов Д. С., Технологии электромагнитной совместимости 2014 № 3(50) С. 36-44
In article features of designing of the distributed power supply system are considered, modelling of untying condensers as a part of distributed to the power supply system is spent, the approach to construction of the distributed power supply system is described ...
Added: October 1, 2014
Феськов Д. О., Романов О. Ю., Короткий Є. В., Проблеми iформатизацii та управлiння 2013 No. 2 (42) P. 118-123
The review of different approaches to the simulation of the networks-on-chip (NoC) is performed. The simulator of the NoC where the topology is set with the matrix of connections between the routers that manage the traffic by means of the routing tables is developed. The capabilities of the NoC simulator are examined and the results ...
Added: February 18, 2015
Kofanov Y. N., М. : АНО «Академия надёжности», 2023
В монографии представлены результаты научной школы «Автоматизированная система обеспечения надёжности и качества аппаратуры АСОНИКА» д.т.н., профессора Ю.Н. Кофанова в Национальном исследовательском университете «Высшая школа экономики». Рассмотрен комплекс вопросов, связанных с историей появления в российской электронной инженерии автоматизированной системы АСОНИКА, а также С разработкой её математического содержания, на основе которого созданы методы для замены физических испытаний ...
Added: March 24, 2023
Zhadnov V. V., М. : МИЭМ НИУ ВШЭ, 2015
Рассмотрены вопросы применения автоматизированных систем обеспечения надежности и качества радиоэлектронных средств на примере визуальной среды обеспечения надежности при проектировании - программного комплекса АСОНИКА-К. Приведено описание расчетных методов, применяемых при проектировании радиоэлектронных средств для оценки показателей их надежности. Приведены типовые задачи проектных исследований надежности радиоэлектронных средств, для решения которых могут применяться система расчета надежности электронных модулей ...
Added: December 24, 2015
Kofanov Y. N., Shalumov A. S., Шалумов М. А., Автоматизация. Cовременные технологии 2017 Т. 71 № 3 С. 106-112
Рассмотрены проблемы, задачи анализа и моделирования надежности электронных компонентов и радиоэлектроных средств с учетом тепловых, механических, электромагнитных и других воздействий, а также проведен анализ программного обеспечения ...
Added: October 13, 2017