?
Расчет тепловых деформаций и напряжений в многослойных наноструктурах оптических узлов для космической техники
С. 191–196.
Vinogradov A., Духовенский Г. Е., Matveev E. V.
In book
М.: Московский государственный институт электроники и математики, 2010.
Левенков Я. Ю., Чичекин И. В., Вдовин Д. С. et al., Труды НАМИ 2025 № 1 (300) С. 17–30
Введение (постановка задачи и актуальность). В настоящее время широкое распространение получило использование автономных мобильных беспилотных транспортно-технологических средств (БТТС) при выполнении работ в зонах с вредными и опасными факторами. Также данные машины могут быть использованы для выполнения поисково-спасательных работ, доставки грузов в труднодоступные районы и иных подобных задач. Поэтому к таким БТТС предъявляются повышенные требования к ...
Added: April 16, 2026
Mikolaenko V., Конюшенко М. Н., Стулков Л. Д., Механическое оборудование металлургических заводов 2025 № 2(25) С. 23–30
Uniaxial tensile testing of flat specimens under superplastic conditions is widely used to determine the deformation behavior of materials. However, the standard interpretation of the results relies on the hypothesis of an ideal uniaxial stress state and often fails to account for the influence of specimen geometry and material flow from the gripping zones to ...
Added: March 5, 2026
Aksenov O. I., Bozhko S. I., A.A. Fuks et al., Journal of Magnetism and Magnetic Materials 2024 Vol. 591 Article 171772
The magnetic domain structure of the surface layer of Fe-based amorphous microwires with a diameter of 20 μm
(after glass removal) was investigated. An approach has been developed to study the domain structure of the
curved surface of a microwire by magnetic force microscopy. It was found that in low magnetic fields the domain
structure of the surface ...
Added: February 25, 2026
Абрамова С. В., Дальневосточный аграрный вестник 2024 Т. 18 № 2 С. 106–114
Для повышения экологической безопасности в настоящее время большое внимание уделяется использованию в качестве энергоносителей альтернативных источников энергии, что в значительной мере позволяет снизить токсичность выхлопных газов. Значительная роль отводится внедрению в отрасли сельского хозяйства альтернативных видов энергии, основанных на водородных топливных элементах. Для автомобильного транспорта в последние годы широкое применение получило использование в качестве источника ...
Added: September 24, 2025
Данилин А. Н., Yurin A., Кондратьев Н. М. et al., Компьютерная оптика 2023 Т. 47 № 4 С. 580–587
Advantages and prospects of using optical microresonators for the development of measuring instruments based on frequency combs are described. A principle of a frequency comb generator based on an optical microresonator is considered. An example of modeling the properties of microresonators used to generate optical frequency combs is considered. The influence of the nonuniformity of ...
Added: July 5, 2023
Аксенов О. И., Fuks A., Волков Н. А. et al., Instruments and Experimental Techniques 2023 Vol. 66 No. 3 P. 121–124
Within the framework of this work, a new method for tensile fatigue testing of thin microwires and
wires has been developed in accordance with GOST 25.502-79. The developed method has been tested on
amorphous microwires of composition Fe77.5Si7.5B15 in glass insulation. It has been established that the deformation mode in the stress range from 0 to 700 ...
Added: June 6, 2023
Mironchuk B., Abrosimova G., Bozhko S. et al., Journal of Non-Crystalline Solids 2022 Vol. 577 Article 121279
The parameters of shear bands and their relationship with the nanocrystallization process in the Al87Ni8La5
amorphous alloy under deformation were studied by X-ray diffraction, high resolution electron microscopy, and
atomic force microscopy. Deformation of the samples was carried out by room temperature rolling and high
pressure torsion methods. An increase in the deformation level was found to lead ...
Added: January 20, 2022
Иванов А. Д., Minaev V., Вишняков Г. Н., Приборы и техника эксперимента 2019 № 6 С. 121–125
The results of measuring the deformation of products manufactured by methods of additive technologies are presented. The process of searching for and determining subsurface delamination and inconsistency defects by a contactless optical method based on shearography is shown. This method works on the
principles of interferometry and holography. The slightest displacement of the surface can be ...
Added: November 2, 2021
Иванов А. Д., Minaev V., Вишняков Г. Н. et al., Измерительная техника 2019 № 9 С. 27–32
A calibration device intended for metrological assurance of instruments used to measure deformations and
displacements by methods of electronic speckle interferometry and shearography is developed. The optical
methods presented here may be applied to different types of materials possessing rough surfaces. The proposed device reproduces stress-strain states by means of elastic deformation of the surface of a ...
Added: November 2, 2021
Kolesnikov A. L., Budkov Y., Gor G. Y., Journal of Physics: Condensed Matter 2022 Vol. 34 No. 6 Article 063002
Adsorption-induced deformation is a change in geometrical dimensions of an adsorbent
material caused by gas or liquid adsorption on its surface. This phenomenon is universal and
sensitive to adsorbent properties, which makes its prediction a challenging task. However, the
pure academic interest is complemented by its importance in a number of engineering
applications with porous materials characterization among them. ...
Added: October 20, 2021
Юрасов Д. В., Байдакова Н. А., Verbus V. A. et al., Физика и техника полупроводников 2021 Т. 55 № 5 С. 420–426
In this work, formation of locally tensile strained Ge structures (micro-bridges) on SOI substrates embedded into microcavities is reported and their optical properties are discussed. The cavity compatible with the shape of the active region was designed in such a way as to provide an effective localization of the
electromagnetic field in the active region of ...
Added: October 11, 2021
Mikolaenko V., Journal of Physics: Conference Series 2021 Article 012022
Superplasticity is an ability of polycrystalline materials to archive extremely large deformations, which is utilized in advanced forming technologies demanded mainly in the aerospace industry. Design of such technologies needs an information of the material flow behaviour, which describes the relation of the effective stress on the strain and strain rate taking place during deformation. ...
Added: September 22, 2021
Zakhariev I., Journal of Physics: Conference Series 2021 Vol. 1740 P. 1–6
Superplastic blow forming is a technology of shell parts production. The development of these processes requires computer simulation which cannot be realized without accurate parameters of the applied material. This characterization can be based on results of free bulging tests. Characterization techniques utilize the models of the dome growth during the bulging test. This study ...
Added: January 27, 2021
Yurasov D. V., Baidakova N. A., Verbus V. A. et al., Semiconductors 2019 Vol. 53 No. 10 P. 1324–1328
The results on the formation of locally strained Ge microstructures on silicon-on-insulator (SOI) substrates and investigation of their optical properties are presented. Suspended Ge structures are formed by optical lithography and plasmachemical and selective chemical etching using the “stress concentration” approach. To provide a heat sink from Ge microstructures, their formation scheme is modified so ...
Added: October 24, 2019
Юрасов Д. В., Байдакова Н. А., Verbus V. A. et al., Физика и техника полупроводников 2019 Т. 53 № 10 С. 1360–1365
The results on the formation of locally strained Ge microstructures on silicon-on-insulator (SOI) substrates and investigation of their optical properties are presented. Suspended Ge structures are formed by optical lithography and plasmachemical and selective chemical etching using the “stress concentration” approach. To provide a heat sink from Ge microstructures, their formation scheme is modified so ...
Added: October 24, 2019
Lyusin D., Психологический журнал 2019 Т. 40 № 5 С. 97–106
The article presents the development of the new self-report questionnaire EmoS-15 measuring core affect. Core affect is defined as the key component of any emotional phenomenon, elementary consciously accessible affective feeling not directed at anything. The EmoS-15 is based on the structure model of core affect derived from the Russian data. The model distinguishes three ...
Added: October 18, 2019
Borisov N., Kasatkin A., Presnyakov S., T-Comm: Телекоммуникации и транспорт 2019 Т. 13 № 2 С. 4–10
The task is to sharply reduce the complexity of analysis, multivariate analysis and parametric optimization of linear and linearized equivalent electrical circuits. The source of such schemes are not only linear electronic circuits, but also circuits formed on the basis of artificial electrical analogies. They can be formed on the basis of finite element methods ...
Added: March 1, 2019
Yakovlev E., Чекмарев Д. Т., Епифанов В. Ю., В кн.: Международная молодежная школа-семинар "Современная геометрия и ее приложения". Международная конференция "Современная геометрия и ее приложения". Материалы школы-семинара и конференции.: Каз.: Издательство Казанского университета, 2017. С. 164–168.
Finite element numerical schemes for solving the continuum mechanics problems are discussed. One of the authors developed a method of acceleration of calculations which uses the simplicial mesh inscribed in the original cubic cell partitioning of a three-dimensional body. In this work it is shown that the obstacle to the construction of this design may be ...
Added: December 6, 2018
Lisienkova L. N., Savenkova I., Baranova E. V., , in: IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING Workshop on Materials and Engineering in Aeronautics (MEA2018) Том. 313. 2018 Workshop on Materials and Engineering in Aeronautics (MEA2018)Vol. 313.: IOP Publishing, 2019. P. 1–7.
The paper discloses the method for estimating the deformation of fibroreticulate materials under the conditions of spatial multiaxial cyclic tension. The relevance of the method application for estimating the reliability performance of materials used for upholstering and finishing the interior of aircraft cabins has been justified. The equations of the elastic state of flexible fibroreticulate ...
Added: November 9, 2018
Lyusin D., / Series WP BRP "PSYCHOLOGY". 2018.
The well-known modern dimensional models of affect include two or three dimensions. They are typically based on self-reports using English emotion terms. It remains unclear to what extent these models can be applied to different cultures and languages. The present study is aimed at finding the dimensions underlying the descriptions of emotional states in Russian ...
Added: April 9, 2018