?
Проектирование устойчивой конструкции узла швейных изделий из курточных тканей
Вестник технологического университета. 2017. Т. 20. № 19. С. 70–74.
Туханова В. Ю.
The article considers the engineering packaging materials for garments, experimentally investigated technological ways of strengthening of the construction site; presented recommendations for improving unit of garments on the stage of choosing materials.
Priority areas:
engineering science
Language:
Russian
The Journal of Physical Chemistry Letters 2026 Vol. 17 No. 18 P. 5386–5394
We demonstrate and rationalize the effect of Au nanoparticles (NPs) on the hierarchical g-C3N4/CeO2 heterojunction. g-C3N4/CeO2 decorated with monodispersed plasmonic Au NPs was synthesized. Detailed analyses showed that CeO2 nanocubes and monodispersed Au NPs were evenly distributed over the 2D g-C3N4 surface, forming a robust interface enriched with abundant active sites. The structure enabled efficient separation of photogenerated charge ...
Added: May 16, 2026
Das A., Paul R., Sharma N. et al., Colloids and Surfaces A: Physicochemical and Engineering Aspects 2026 Vol. 728 P. 138830
Niobium-doped TiO2 (Nb-TiO2), demonstrates dual functionality as an efficient photocatalyst for dye degradation and a promising photoelectrocatalyst for water oxidation. Nb incorporation via a facile hydrothermal method was confirmed by XRD (Rietveld refinement), XPS, TEM, FT-IR, Raman, and BET analyses, indicating successful lattice doping and structural modification. Photocatalytic dye degradation experiments were conducted using a model ...
Added: May 16, 2026
Гущина В. А., / Series chemrxiv-2023-vpzhz-v2 "ChemRxiv". 2023.
All-inorganic perovskite CsPbBr3 and Cs4PbBr6 nanoparticles are being intensively studied due to their unique properties and wide range of applications; however, however, the nature of their optical properties is not yet fully understood due to the difficulty of synthesis of singlephase nanoparticles. In this article we describe the features of the synthesis of single-phase particles ...
Added: May 14, 2026
Гущина В. А., Mendeleev Communications 2025 Vol. 35 No. 2 P. 193–195
All-inorganic perovskite CsPbBr3 and Cs4PbBr6 nanoparticles are intensively studied for their unique optical properties, though synthesizing single-phase nanoparticles has posed challenges. Detailed synthesis method of CsPbBr3 and Cs4PbBr6 single-phase nanoparticles and their chemical and phase analysis are described. Distinctive optical characteristics, such as photoluminescence, optical band gap and the Urbach tail region, are revealed and explained within the current ...
Added: May 14, 2026
Гущина В. А., Physics of Complex Systems, Russia 2026 Vol. 7 No. 1 P. 3–15
Heterostructures based on ZnO nanorods and CsPbBr3 nanocrystals were investigated for their potential as semiconductor SERS substrates. We found that ZnO morphology governs the efficiency of interfacial energy transfer, leading to enhanced photoluminescence under 390 nm excitation and a noticeable reduction of the bandgap in the composites. Raman analysis revealed a pronounced intensity enhancement and ...
Added: May 14, 2026
Semenova D., Radygina A., Zaripova J. et al., Nutrition and Food Science 2026 P. 1–13
Purpose
This study aims to investigate how objective (chemical composition, processing method) and subjective (perceived fat content) milk characteristics influence taste perception.
Design/methodology/approach
A blind tasting experiment was conducted with 36 participants who evaluated six commercial milk samples (all 2.5% fat) differing in thermal processing and brand territorial coverage. Each sample was tasted twice, yielding 432 observations. Fatty ...
Added: May 14, 2026
Гущина В. А., Russian Journal of Inorganic Chemistry 2024 Vol. 69 No. 6 P. 940–948
Currently, ABX3 nanoparticles (NPs) based on lead halides attract the attention due to their unique optical properties and a wide range of applications. The preparation of NPs with lead as a partial or complete replacement is particularly interesting because of the toxicity of this chemical element and most of its compounds. In this study, we propose a ...
Added: May 6, 2026
Yasnitsky L., Голдобин М. А., Мезенцев А. С., Прикладная математика и вопросы управления 2025 № 2 С. 99–116
Представлен обзор современных методов и основанных на них программных
инструментах, применяемых для математического моделирования серийных производственных процессов с целью снижения брака и повышения качества производимых изделий. Перечисляются группы работ, нацеленных на обнаружение и классификацию дефектов, работ, в которых решаются задачи прогнозирования образования дефектов и определения значимости параметров, работ направленных на поиск
оптимального сочетания технологических параметров изготовления изделий, ...
Added: May 5, 2026
Morozov E. V., Demin A. S., Borovitskaya I. V. et al., Inorganic Materials: Applied Research 2026 Vol. 17 No. 3 P. 619–626
This article presents the results of experiments on the impact of powerful pulsed ion-plasma and
electron flows generated in the working chamber of the Plasma Focus PF-5M installation during each highvoltage
discharge on a model aluminum alloy B95. It is shown that the general characteristics of the alloy’s
damage upon exposure to pulsed flows of helium ions (HI) ...
Added: May 4, 2026
Qin X., Deng Y., Shchur L. et al., / Series arXiv "math". 2026. No. 2603.02962.
We perform a Monte Carlo analysis of the Ising model on many three-dimensional lattices. By means of finite-size scaling we obtain the critical points and determine the scaling dimensions. As expected, the critical exponents agree with the three-dimensional Ising universality class for all models. The irrelevant field, as revealed by the correction-to-scaling amplitudes, appears to ...
Added: April 20, 2026
Pilé I., Deng Y., Shchur L., / Series arXiv "math". 2026. No. 2604.10254.
We investigate the spatial overlap of successive spin configurations in Markov chain Monte Carlo simulations using the local Metropolis algorithm and the Svendsen-Wang and Wolff cluster algorithms. We examine the dynamics of these algorithms for two models in different universality classes: the Ising model and the Potts model with three components. The overlap of two ...
Added: April 20, 2026
Pavlenko V. I., Bondarenko G.G., Cherkashina N. I. et al., Inorganic Materials: Applied Research 2026 Vol. 17 No. 2 P. 276–282
A composite material based on polyethylene, boron carbide (B4C), and bismuth oxide (Bi2O3) is
synthesized by the method of joint cryogenic milling of all components in liquid nitrogen environment followed
by pressing. The effect of cryogenic milling on the distribution of fillers in a composite is studied and
the prospects of using this method are assessed in comparison ...
Added: April 9, 2026
Черкашина Н. И., Павленко В. И., Bondarenko G. et al., Перспективные материалы 2026 № 4 С. 14–26
В данной работе представлен синтез гибкого полимерного композита для защиты от радиации на основе каучуковой матрицы и оксидов редкоземельных металлов, таких как Dy2O3 и Gd2O3, предназначенного для создания радиационно-защитных экранов и средств индивидуальной защиты. Исследованы его физико-механические характеристики: составы с добавлением оксида диспрозия имеют плотность от 1,31 до 2,44 г/см3, предел прочности при растяжении от ...
Added: April 2, 2026
Kuzyk M., Бахтиарова К. А., Вопросы экономики 2026 № 3 С. 63–86
To date, there are dozens of studies examining various aspects of import dependence and import substitution. Research on cooperation between science and business is also widespread in contemporary economic literature. However, these topics have rarely been examined in relation to each other. This study aims to partially fill this gap. Based on data from a ...
Added: March 18, 2026
Chowde Gowda C., Alexey Kartsev, Tiwari N. et al., Journal of Materials Chemistry C 2024 Vol. 12 No. 46 P. 18691–18703
Two-dimensional (2D) chromium telluride Cr2Te3 exhibits strong ferromagnetic ordering with high coercivity at low temperatures and paramagnetic behavior when approaching room temperature. The spin states of monolayer Cr2Te3 show ferromagnetic ordering in the ground state. In situ Raman analysis reveals a reversible structure transformation and hence proves ferromagnetic to paramagnetic transition during low-temperature heating cycles (0–25 °C). The magnetic ...
Added: March 16, 2026
Argunov E., Alexey I. Kartsev, Computational Materials Science 2024 Vol. 244 Article 113192
Magnetothermopower and giant magnetoresistance in spinel-type compound has attracted a lot of attention recently. Ab initio computations of the electronic structure and the Seebeck coefficient of the structure are reported. The mixed nature of magnetism was identified to be caused by the competition between ferromagnetic and anti-ferromagnetic impacts, with the corresponding determined exchanged parameters: meV, meV, meV. Seebeck coefficient and electrical conductivity of the compound in the temperature range of K along with its ...
Added: March 16, 2026
Xiao Y., Xue W., Xu N. et al., Rare Metals 2025 Vol. 44 No. 11 P. 8757–8768
Complete collection of target fluids and effective capture of biomolecules are essential when designing and fabricating sensor electrodes. Assembling a conductive metal–organic framework (MOF) film onto a high-surface-area porous aerogel to create a three-dimensional (3D) hierarchically ordered structure represented an effective strategy for fabricating sensor electrodes for body fluid detection. In this study, high-precision, confined ...
Added: March 2, 2026
Чернышов Д. П., Satanin A., Shchur L., / Series arXiv "math". 2025.
We investigate the boundary separating regular and chaotic dynamics in the generalized Chirikov map, an extension of the standard map with phase-shifted secondary kicks. Lyapunov maps were computed across the parameter space (K,K(α, τ)) and used to train a convolutional neural network (ResNet18) for binary classification of dynamical regimes. The model reproduces the known critical ...
Added: November 21, 2025
IGI Global Scientific Publishing, 2025.
This volume, Critical Aspects in Advanced Human Resource Management,
addresses the pressing, high- stakes issues that shape and challenge the field of
HRM today. The term “critical” is used deliberately—it signifies topics of great
significance, demanding thoughtful attention and, often, urgent action.
The chapters included here explore issues that are not only theoretically rich but
also practically relevant. Each contributor ...
Added: October 23, 2025
Dushakova I., Душакова Н., Государство, религия, церковь в России и за рубежом 2025 Т. 1 № 43 С. 270–300
The article is devoted to the framing of “new technologies” in public statements by the head of the Russian Orthodox Old‑Rite Church (ROOC), Metropolitan Cornelius. The sources used are messages in the Russian media and materials published on the official website of the ROOC. Data was collected both manually and using one of the most ...
Added: October 20, 2025
Fabrykant M., / Series SocArXiv "SocArXiv". 2025.
This article explores to what extent the cross-national differences in pride reflect objective differences in countries’ performance in these spheres. The empirical study conducted to answer this question is based on the survey data from the International Social Survey Program – National Identity covering 32 countries and quantitative indicators of countries’ achievements in technology from ...
Added: October 7, 2025
Туханова В. Ю., Kankulov A., Костюмология 2025 Т. 9 № 4
The article presents the study focused on the development of a conceptual scientific and methodological model for designing products in the apparel and footwear industries within a digital environment. It examines the specific features of the design stages of light industry products, considering the integration of innovative technologies into higher education programs for training specialists ...
Added: October 3, 2025
Туханова В. Ю., Бородина Е. В., Костюмология 2024 Т. 9 № 2
The article presents a study of the technology of creating digital 3D models using computer programs. The impact of Computer-Generated Imagery on the formation of fashion trends in creative industries is analyzed. The purpose of the study is to study Computer-Generated Imagery in the development of the fashion industry and the formation of fashion trends. ...
Added: October 3, 2025
IEEE, 2022.
Dear contributors, authors and participants of IEEE CCTA 2022 in Trieste,
As Program Chair I would like to thank you for your contributions for this important conference concerning control applications in CSS IEEE. Although we had a very uncertain situation with COVID19 we had more than 360 papers submitted. Very early, we decided to held the ...
Added: August 9, 2025