?
International Conference “Scientific research of the SCO countries: synergy and integration”
Book Studies of the properties and structure of mineral wool energy-efficient products /Scientific research of the SCO countries: synergy and integration.
Beijing :
Scientific publishing house Infinity, 2024.
Bobrova E., Zhukov A., Artemenko S. O.
In press
Chapters
Bobrova E., Zhukov A., Artemenko S. O., , in: International Conference “Scientific research of the SCO countries: synergy and integration”Book Studies of the properties and structure of mineral wool energy-efficient products /Scientific research of the SCO countries: synergy and integration.: Beijing: Scientific publishing house Infinity, 2024. P. 152–157.
In the modern world, increased energy efficiency and reduction of energy intensity are especially important in the construction industry, which largely determines the development of production as a whole. Reduction of energy intensity can be achieved through the use of efficient thermal insulation materials and products based on them and, in particular, mineral fiber products: ...
Added: December 11, 2024
Language:
English
Plotnikov S., Альманах современной метрологии 2024 № 2 (38) С. 140–149
The results of the analysis of data collected by the method of expert questioning of Russian scientific metrological institutes’ employees, as well as buyers of measuring instruments, are presented. ...
Added: May 21, 2026
Plotnikov S., Апрелев А. В., Апрелева М. А. et al., Альманах современной метрологии 2022 № 2 (30) С. 94–101
The results of the analysis of data from the Federal Information Fund for Ensuring the Uniformity of Measurements in terms of oscilloscopes are presented. ...
Added: May 21, 2026
Андреев Д. В., Корнев С. А., Bondarenko G. et al., Перспективные материалы 2026 № 6 С. 5–11
Выполнено сравнительное исследование процессов сильнополевой зарядовой
деградации подзатворного диэлектрика структур металл-диэлектрик-полупроводник (МДП)
с алюминиевым и поликремниевым затвором. Зарядовые явления в МДП-структурах
изучали методом сильнополевой инжекции электронов в диэлектрик в режиме возрастания
плотности стрессового инжекционного тока с кратковременными переключениями
в измерительный режим при постоянной низкой плотности инжекционного тока.
Использование данного метода позволило получить новые данные о процессах зарядовой
деградации подзатворного диэлектрика МДП-структур с ...
Added: May 21, 2026
Rathish S., Andrey S. Vasenko, Thazhathenair A. et al., The Journal of Physical Chemistry Letters 2026 Vol. 17 No. 18 P. 5386–5394
We demonstrate and rationalize the effect of Au nanoparticles (NPs) on the hierarchical g-C3N4/CeO2 heterojunction. g-C3N4/CeO2 decorated with monodispersed plasmonic Au NPs was synthesized. Detailed analyses showed that CeO2 nanocubes and monodispersed Au NPs were evenly distributed over the 2D g-C3N4 surface, forming a robust interface enriched with abundant active sites. The structure enabled efficient separation of photogenerated charge ...
Added: May 16, 2026
Das A., Paul R., Sharma N. et al., Colloids and Surfaces A: Physicochemical and Engineering Aspects 2026 Vol. 728 P. 138830
Niobium-doped TiO2 (Nb-TiO2), demonstrates dual functionality as an efficient photocatalyst for dye degradation and a promising photoelectrocatalyst for water oxidation. Nb incorporation via a facile hydrothermal method was confirmed by XRD (Rietveld refinement), XPS, TEM, FT-IR, Raman, and BET analyses, indicating successful lattice doping and structural modification. Photocatalytic dye degradation experiments were conducted using a model ...
Added: May 16, 2026
Гущина В. А., / Series chemrxiv-2023-vpzhz-v2 "ChemRxiv". 2023.
All-inorganic perovskite CsPbBr3 and Cs4PbBr6 nanoparticles are being intensively studied due to their unique properties and wide range of applications; however, however, the nature of their optical properties is not yet fully understood due to the difficulty of synthesis of singlephase nanoparticles. In this article we describe the features of the synthesis of single-phase particles ...
Added: May 14, 2026
Гущина В. А., Mendeleev Communications 2025 Vol. 35 No. 2 P. 193–195
All-inorganic perovskite CsPbBr3 and Cs4PbBr6 nanoparticles are intensively studied for their unique optical properties, though synthesizing single-phase nanoparticles has posed challenges. Detailed synthesis method of CsPbBr3 and Cs4PbBr6 single-phase nanoparticles and their chemical and phase analysis are described. Distinctive optical characteristics, such as photoluminescence, optical band gap and the Urbach tail region, are revealed and explained within the current ...
Added: May 14, 2026
Гущина В. А., Physics of Complex System 2026 Vol. 7 No. 1 P. 3–15
Heterostructures based on ZnO nanorods and CsPbBr3 nanocrystals were investigated for their potential as semiconductor SERS substrates. We found that ZnO morphology governs the efficiency of interfacial energy transfer, leading to enhanced photoluminescence under 390 nm excitation and a noticeable reduction of the bandgap in the composites. Raman analysis revealed a pronounced intensity enhancement and ...
Added: May 14, 2026
Stepanyants V., Долгов И. М., Хорошилов Г. С. et al., Труды Института системного программирования РАН 2026 Т. 38 № 3 С. 95–110
Highly automated and connected vehicles are gradually entering the market. Currently, solutions are being proposed that allow these technologies to be used for cooperative driving automation, which can significantly improve traffic safety. Such technologies and their software should be tested to ensure safety before being implemented in real systems. Verification and validation of vehicular control ...
Added: May 12, 2026
Гущина В. А., Russian Journal of Inorganic Chemistry 2024 Vol. 69 No. 6 P. 940–948
Currently, ABX3 nanoparticles (NPs) based on lead halides attract the attention due to their unique optical properties and a wide range of applications. The preparation of NPs with lead as a partial or complete replacement is particularly interesting because of the toxicity of this chemical element and most of its compounds. In this study, we propose a ...
Added: May 6, 2026
Yasnitsky L., Голдобин М. А., Мезенцев А. С., Прикладная математика и вопросы управления 2025 № 2 С. 99–116
Представлен обзор современных методов и основанных на них программных
инструментах, применяемых для математического моделирования серийных производственных процессов с целью снижения брака и повышения качества производимых изделий. Перечисляются группы работ, нацеленных на обнаружение и классификацию дефектов, работ, в которых решаются задачи прогнозирования образования дефектов и определения значимости параметров, работ направленных на поиск
оптимального сочетания технологических параметров изготовления изделий, ...
Added: May 5, 2026
Morozov E. V., Demin A. S., Borovitskaya I. V. et al., Inorganic Materials: Applied Research 2026 Vol. 17 No. 3 P. 619–626
This article presents the results of experiments on the impact of powerful pulsed ion-plasma and
electron flows generated in the working chamber of the Plasma Focus PF-5M installation during each highvoltage
discharge on a model aluminum alloy B95. It is shown that the general characteristics of the alloy’s
damage upon exposure to pulsed flows of helium ions (HI) ...
Added: May 4, 2026
Ершов И. А., Системная инженерия и инфокоммуникации 2025 № 4 С. 11–14
The heat consumption of residential buildings is a stochastic series. It is necessary for the design of thermal energy regulators the creation of a neural network model. In the paper, the model is carried out based on Long Short-Term Memory (LSTM). The high accuracy of reproducing the series was achieved by training the model on ...
Added: April 22, 2026
Pavlenko V. I., Bondarenko G.G., Cherkashina N. I. et al., Inorganic Materials: Applied Research 2026 Vol. 17 No. 2 P. 276–282
A composite material based on polyethylene, boron carbide (B4C), and bismuth oxide (Bi2O3) is
synthesized by the method of joint cryogenic milling of all components in liquid nitrogen environment followed
by pressing. The effect of cryogenic milling on the distribution of fillers in a composite is studied and
the prospects of using this method are assessed in comparison ...
Added: April 9, 2026
Kuvshinov A., Fominykh A., Ivanov F., IEEE Access 2026 Vol. 14 P. 50549–50557
The recursive (U|U+V) construction, a generalization of which includes polar codes, provides a powerful framework for building complex codes from simpler components. However, existing approaches predominantly rely on fixed or symmetric tree architectures, overlooking the critical impact of decomposition choice on code performance. This paper addresses the challenge of optimal tree decomposition selection by presenting a framework ...
Added: April 7, 2026
Manohin A., Электрооборудование: эксплуатация и ремонт 2026 № 2 С. 75–85
An extended method for calculating heat transfer coefficients using programs
for automated analysis of the thermal regime of TRIANA (ASONIKA-T) radio-electronic
equipment for various designs is proposed. Based on the analysis of the obtained
heat transfer coefficients, it is shown how to set realistic values for the convective
heat transfer coefficient in SOLIDWORKS Simulation and other CAE thermal analysis
systems. ...
Added: April 3, 2026
Черкашина Н. И., Павленко В. И., Bondarenko G. et al., Перспективные материалы 2026 № 4 С. 14–26
В данной работе представлен синтез гибкого полимерного композита для защиты от радиации на основе каучуковой матрицы и оксидов редкоземельных металлов, таких как Dy2O3 и Gd2O3, предназначенного для создания радиационно-защитных экранов и средств индивидуальной защиты. Исследованы его физико-механические характеристики: составы с добавлением оксида диспрозия имеют плотность от 1,31 до 2,44 г/см3, предел прочности при растяжении от ...
Added: April 2, 2026
Litvinenko N., IEEE Access 2024
Added: December 9, 2024
Zhukov A., Bobrova E., Popov I. et al., International Journal for Computational Civil and Structural Engineering 2021 Vol. 17 No. 4 P. 73–82
Abstract. The article discusses ways to solve engineering problems in the study of technological processes using methods of system analysis. The essence of this method is to study the technology as a cybernetic system with an assessment of the" reactions” of this system to external influences formed during an active experiment. At the same time, ...
Added: March 21, 2023
E. Yu. Bobrova, Popov I. I., Gandzhuntscev M. I. et al., Russian Journal of Building Construction and Architecture 2021 No. 4(64) P. 44–52
The modernization of insulation systems if engineering structures, including
pipelines and industrial facilities, is aimed both at solving the general problems of energy efficiency, as
well as the particular tasks of heat saving and environmental safety. In this regard, the development and
use of a binder that cures at much lower temperatures and does not contain phenols is ...
Added: March 20, 2023
Konstantin O. Petrosyants, Nikita I. Ryabov, , in: 2020 26th International Workshop on Thermal Investigations of ICs and Systems (THERMINIC).: IEEE, 2020. P. 1–7.
Multi-chip embedded PCBs were in resent years the mainstream technology of electronic packaging size reduction and at the same time providing improved performance. Ultra-small package size obviously strongly impacts the SiP module thermal behaviour. Unfortunately the complete thermal design methodology was not developed for this technology till now. In this work the problem of thermal ...
Added: June 5, 2021
Bankov D., Khorov E., Lyakhov A., , in: 2017 IEEE 28th Annual International Symposium on Personal, Indoor, and Mobile Radio Communications (PIMRC).: IEEE, 2017. P. 1–5.
LoRaWAN is a promising low power long range wireless communications technology for the Internet of Things. An important feature of LoRaWAN gateways is related to so-called capture effect: under some conditions the gateway may correctly receive a frame even if it overlaps with other ones. In this paper, we develop a pioneering mathematical model of ...
Added: October 9, 2018
Сазонова А. С., Mishchenko A. V., Проблемы анализа риска 2010 Т. 7 № 2 С. 78–87
Th e theory of optimal portfolio plays the most important role in the investment management. Th is theory aims at solving the problem of choosing an optimal asset portfolio ratio. In classical investment models it is assumed that the assets included in the portfolio are infi nitely divisible, hence a portfolio is regarded to be ...
Added: October 22, 2012