?
System analysis of technological processes
International Journal for Computational Civil and Structural Engineering. 2021. Vol. 17. No. 4. P. 73–82.
Zhukov A., Bobrova E., Popov I., Demissie B. Ⱥ.
Abstract. The article discusses ways to solve engineering problems in the study of technological processes using methods of system analysis. The essence of this method is to study the technology as a cybernetic system with an assessment of the" reactions” of this system to external influences formed during an active experiment. At the same time, optimization problems are solved analytically. Analytical optimization is based on two main principles. The regression equations obtained as a result of processing experimental data and testing statistical hypotheses are models that adequately describe real processes. Each of these equations is an algebraic function of several variables, to which methods of mathematical analysis are applicable, including the study of extremums of functions in partial derivatives. The next step is to develop a process algorithm and develop computer programs that allow you to select the composition and predict the properties of the product. As an engineering interpretation, it is possible to construct optimized nomograms that allow solving both direct and inverse problems; that is, predicting the result or selecting technological factors. The research methods described in the article are implemented in the study of technologies of cellular concrete, foam concrete, cement-polymer concrete and products made of mineral wool and foam glass. As an example, the article considers the optimization of the selection of the composition of fine-grained concrete reinforced with chopped glass fiber. The implementation of the developed method allowed us to determine the optimal value of the determining parameters, including the consumption of fiber and plasticizer, as well as to form a method for studying the properties of products.
Language:
English
Zaikin A., Kalenkov M. S., Physical Review B: Condensed Matter and Materials Physics 2026 Vol. 114 Article 214502
We propose a microscopic scheme that allows to describe ac Josephson effect in superconducting junctions
in terms of dissipative quantum dynamics of subgap Andreev bound states. This approach is particularly useful
for highly transparent junctions at subgap bias voltages in which case a nontrivial combination of Landau-Zener
tunneling between Andreev levels and their instability due to quasiparticle escape ...
Added: October 18, 2026
Zaikin A., Kalenkov M. S., Physical Review Letters 2026 Vol. 137 Article 076004
With the aid of a microscopic theory we derive an effective Hamiltonian that controls quantum dynamics
of Andreev states in superconducting nanojunctions out of equilibrium. Resolving the corresponding
Schrödinger-like equation we obtain the “wave functions” for Andreev levels and evaluate electric current
across the junction in the presence of an external voltage bias.We demonstrate that quantum interference of
Andreev ...
Added: October 18, 2026
Сказочкин А. В., Бондаренко Г.Г., Гайдар А. И. et al., Перспективные материалы 2026 № 11 С. 60–75
Рассмотрены механизмы структурно-фазовой перестройки и физико-химические
процессы при формировании износостойких и коррозионно-пассивных покрытий на
чугуне ВЧ40 комбинированной технологией, сочетающей ультразвуковое пластическое
деформирование и электроискровое легирование (ЭИЛ). Образцы модифицировали
ультразвуковым индентором (УЗИ) в среде микрочастиц SiO2 (5 мкм) под давлением
400 МПа с последующим ЭИЛ графитовым и твердосплавным (ВК8) электродом. Структуру,
состав и микротвердость изучали методами сканирующий электронный микроскопии
совмещенной с энергодисперсионной рентгеновской ...
Added: October 16, 2026
Тукачев Н. В., Akkuratov A., Nikitenko S. et al., Solar Energy 2020 Vol. 198 P. 605–611
One of the major challenges in the field of organic photovoltaics is associated with high-throughput manufacturing of efficient and stable organic solar cells. Practical realization of technologies for production of large-area organic solar cells requires the development of novel materials with a defined combination of properties ensuring sufficient reliability and scalability of the process in ...
Added: October 14, 2026
Тукачев Н. В., Liu X., Wang K. et al., INTERDISCIPLINARY MATERIALS 2026 Vol. 5 No. 1 P. 85–123
Hydrogen halide gases are one of the most wide-spread pollutants of atmosphere, which are generated by various industrial sectors or natural processes, and may dramatically affect human health above certain thresholds of exposure. Hence, it is critically important to develop effective sensing methods for these gases. Herein, we review the recent progress as well as ...
Added: October 14, 2026
Zhukov A., Chen F., Zeng Y. et al., Nanoscale 2026 Vol. 18 No. 36 P. 19223–19253
Colloidal semiconductor nanocrystals have emerged as promising materials for next-generation light-emitting diodes (LEDs) owing to their solution processability, tunable emission wavelengths, narrow emission linewidths, and high photoluminescence quantum yields. Among them, anisotropic nanocrystals, including one-dimensional nanorods (NRs) and two-dimensional nanoplatelets (NPLs), offer additional opportunities for controlling transition dipole moment orientation and light out-coupling efficiency. These ...
Added: October 2, 2026
Ostovari Moghaddam A., Mehrabi-Kalajahi S., Solizoda I. A. et al., Metals and Materials International 2026 P. 1–9
Off-stoichiometric boron-doped chemically complex intermetallic alloys (CCIMAs) have recently emerged as a new avenue for overcoming the low temperature brittleness of ordered superlattices. However, their behavior at high temperatures remains unexplored. In this study, a novel (Ni39.6Co29.3Cr10Al15.8Ta3.3Nb2)98.5B1.5 CCIMA was prepared and its oxidation resistance over a wide temperature range (500 °C–950 °C) was studied. The ...
Added: October 1, 2026
Obraztsova Anna, Fominykh Nikita, Komarov Sergey et al., Applied Physics Letters 2026 Vol. 129 Article 132110
Miniaturization of edge-emitting quantum-dot lasers is hampered by increased mirror losses in ultra-short Fabry–Perot cavities and limited modal gain of quantum dots (QDs). Here, we demonstrate electrically injected InGaAs/GaAs quantum-dot stripe lasers with an 8-lm stripe width and focused-ion-beam (FIB)-etched mirrors defining cavity lengths from 300 to 77 lm. The laser cavities were fabricated using ...
Added: September 30, 2026
Piliugin L., Antropov A., Lobashev E. et al., Journal of Nuclear Materials 2026 Vol. 632 Article 156876
The effects of dislocations on the mobility of gas nanobubbles pinned to them are considered as novel unex- plored mechanisms of accelerated fission gas release and investigated using classical molecular dynamics of helium bubbles in FCC aluminum. Non-equilibrium methods are developed to calculate the mobility of a pinned bubble both along and across the dislocation ...
Added: September 28, 2026
Li Y., Han J., Zaman N. et al., ACS Applied Materials & Interfaces 2026 Vol. 18 No. 39 P. 54241–54251
The development of lead sulfide (PbS) quantum dot (QD) photodetectors for short-wave infrared (SWIR) applications has been fundamentally limited by the thermodynamic instability of large PbS QD facets, which leads to aggregation and epitaxial fusion. In this work, robust thermodynamic stabilization was achieved by introducing methylammonium chloride (MACl) in PbS QD surface passivation, as validated ...
Added: September 26, 2026
Veronica Voitovich, Makhov I., Ivan Melnichenko et al., Optics Letters 2026 Vol. 51 No. 17 P. 4872–4875
The influence of cavity surface passivation with SiO2 coating deposited by the plasma-enhanced chemical vapor deposition technique is investigated for injection microdisk lasers with an InGaAsN/GaAs quantum well active region. The electroluminescence spectra of the microdisk lasers with cavity diameters ranging from 12 to 32 μm with and without sidewall surface passivation were studied for a ...
Added: September 25, 2026
Бабичев А. В., Makhov I., Kryzhanovskaya N. et al., Оптика и спектроскопия 2026 Т. 134 № 3 С. 272–277
Представлены результаты по реализации генерации при повышенных температурах в лазерах с длиной волны генерации 980 nm на основе вертикального микрорезонатора с использованием непоглощающих на длине волны оптической накачки зеркал. Минимальная пороговая мощность накачки составила ~0.8 mW и соответствовала температуре 150 K. Добротность микрорезонатора, определенная на пороге генерации, превысила 13000. Максимальная рабочая температура микролазера составила 195 ...
Added: September 25, 2026
Бабичев А. В., Makhov I., Kryzhanovskaya N. et al., Письма в Журнал технической физики 2026 Т. 52 № 12 С. 40–43
Реализована одночастотная генерация при 300 K в лазерах на основе вертикального микрорезонатора. Для лазеров с полупроводниковым выводным зеркалом пороговая плотность мощности накачки составила 6.5 kW/cm2. Добротность микрорезонатора и длина волны излучения, определенные на пороге генерации, равнялись 8800 и ~ 959.8 nm. Применение конструкции микрорезонатора с гибридным выводным зеркалом позволило повысить добротность микрорезонатора (до 12 360) ...
Added: September 25, 2026
Бабичев А. В., Makhov I., Kryzhanovskaya N. et al., Письма в Журнал технической физики 2026 Т. 52 № 18 С. 30–34
Представлены результаты реализации генерации при комнатной температуре в планарных вертикальных микрорезонаторах на основе зеркал Al0.2Ga0.8As/Al0.9Ga0.1As. При 300 K пороговая плотность мощности и добротность на пороге генерации составили 11.4± 0.7 kW/cm2 и 5070± 160 соответственно. Двукратное превышение порога генерации привело к увеличению добротности микрорезонатора до 19 000. Эффективный латеральный теплоотвод подтвержден малым сдвигом энергии кванта, который составил ...
Added: September 25, 2026
Zhukov A., Wang Q., Zeng Y. et al., Nano Letters 2026 Vol. 26 No. 34 P. 11565–11572
Colloidal semiconductor nanorods (NRs) are promising room-temperature single-photon sources because of their
solution processability, tunable optical properties, and intrinsically linearly polarized emission. However, simultaneously achieving high photoluminescence quantum yield (PLQY), strong polarization, and high-purity single-photon emission remains challenging in conventional binary-shell NRs due to the competing requirements of
exciton confinement and core/shell lattice−strain management. Here, we report CdSe/CdZnS gradient alloy core/shell NRs with tunable ...
Added: September 23, 2026
Боровицкая И. В., Пименов В. Н., Коршунов С. Н. et al., Перспективные материалы 2026 № 10 С. 37–54
Проведено сравнение, обобщение и систематизация механизмов эрозии и разрушения
поверхности малоактивируемых материалов, перспективных для использования в
качестве материалов вакуумной камеры термоядерных реакторов: ванадия, его сплава
V – 10 Ti – 6 Cr – 0,05 Zr – 0,1 Si и вольфрама при последовательном воздействии на
них ионных и тепловых потоков. Тепловые потоки имитировали с помощью мощного
импульсного лазерного излучения (ЛИ), создаваемого ...
Added: September 22, 2026
Andreev D. V., Kornev S. A., Bondarenko G.G. et al., Inorganic Materials: Applied Research 2026 Vol. 17 No. 5 P. 1226–1230
Comparative studies are carried out to investigate high-field charge degradation effects in the gate
dielectric of metal—insulator—semiconductor (MIS) structures with aluminum and polysilicon gates.
Charging phenomena in MIS structures are explored using high-field electron injection into the dielectric
under conditions of gradually increasing voltage current density, with periodic short-term switching to a measurement
mode at a constant low injection ...
Added: September 15, 2026
Cherkashina N. I., Pavlenko V. I., Bondarenko G.G. et al., Inorganic Materials: Applied Research 2026 Vol. 17 No. 5 P. 1247–1257
The description is given to the synthesis of a flexible polymer composite for radiation protection
based on a rubber matrix and rare-earth metal oxides (Dy2O3 and Gd2O3). The physico-mechanical parameters
are established for the compositions with dysprosium oxide as follows: the density ranging from 1.31 to
2.44 g/cm3, tensile strength is staying between 6.06 and 1.72 MPa. In ...
Added: September 15, 2026
Huang D., Chen Y., Luo X. et al., Chinese Journal of Physics 2026 Vol. 103 P. 1803–1814
Using self-consistent Bogoliubov-de Gennes calculations for kagome flakes framed by armchair
and flat edges, we observe a configuration-dependent spatial inhomogeneity of an 𝑠-wave superconducting
condensate. Specifically, at half-filling, the local pair potential is significantly enhanced
by up to 77.8% at edge centers and up to 148.9% at corners, subsequently boosting their
local critical temperatures by up to 13.5% and ...
Added: September 7, 2026
P. M. Marychev, A. A. Shanenko, Physical Review B: Condensed Matter and Materials Physics 2026 Vol. 114 No. 7 Article 074509
We investigate the effect of weak interband impurity scattering on the intertype (IT) domain between type-I and type-II superconductivity in diffusive two-band superconductors. Our results show that the significant broadening of the IT domain with increasing band diffusivity ratio, previously established in the absence of interband scattering, persists under weak interband scattering. However, depending on ...
Added: September 7, 2026
Denis K., Н. Новгород: Нижегородский государственный университет им. Н.И. Лобачевского, 2025.
В учебном пособии излагаются элементы теории и описание избранных экспериментальных результатов, полученных в активно развивающейся физике топологических изоляторов. Рассмотрены наиболее простые модели поверхностных и краевых состояний в двумерных и трёхмерных топологических изоляторах, их структура в магнитном поле, а также основы топологических методов для определения их свойств. Обсуждаются модели квантовых точек, формируемых в топологических изоляторах. Приведены ...
Added: September 6, 2026
Denis K., Звонков Б. Н., Вихрова О. В. et al., Физика твердого тела 2021 Т. 63 № 9 С. 1245–1252
Сочетанием методов МОС-гидридной эпитаксии и импульсного лазерного нанесения изготовлены гетеронаноструктуры InGaAs/GaAs со слоем (Ga, Mn)As на поверхности, и исследовано влияние воздействия импульсного эксимерного лазера (длина волны 248 nm, длительность импульса ~30 ns, плотность энергии в диапазоне 200-360 mJ/cm2) на их излучательные, структурные и гальваномагнитные свойства. При исследованиях использовалась спектроскопия фотолюминесценции, дополненная возможностью анализа поляризационных характеристик ...
Added: September 6, 2026
David J. L., Leonid Grinin, Korotayev A., Springer, 2026.
Complexity is widely acknowledged as a foundational and pivotal concept in Big History, offering a unifying lens through which to examine the emergence and development of systems—from particles and galaxies to life, civilizations, and beyond. Yet, despite its centrality, major gaps remain in how we define, measure, and interpret complexity across different phases and scales. ...
Added: August 7, 2026
Tomashevskaya A., Гуманитарные исследования в Восточной Сибири и на Дальнем Востоке 2026 № 3 С. 69–78
This article analyzes E. Jünger's views on nihilism. The author reconstructs Jünger's shifting perspectives and identifies key areas of his thought as they evolved over time. Taking the question of nihilism as a foundation, the author demonstrates how the thinker's intellectual vector shifted: from a heroic embrace of modernist tendencies to disillusionment with them and ...
Added: June 10, 2026