?
The Dependability Assessment Method for Electronic Modules Considering Updated Quality Management Principles
P. 132–137.
The scientific article addresses the issue of assessing and ensuring the dependability of electronic modules in light of the significant disparity between the mathematically estimated dependability measures and those obtained from testing results. It has been revealed that the quality management system of the executing organization plays a crucial role in the development of electronic modules, influencing the final outcome of the product in terms of dependability and quality. Analysis of dependability assessment methods in different countries has led to the conclusion that they do not align with the updated requirements and principles of quality management in dependability assurance programs. Therefore, a modified method of assessment, namely the "production quality coefficient," based on the approach applied according to the RIAC-HDBK-217Plus handbook, is proposed. This method incorporates updated principles of quality management. The modified structure of the questionnaire for expert assessment allows for a systematic evaluation of the level (completeness) of necessary measures’ implementation to minimize the proportion of failures belonging to specific categories.
Polesskiy S., Tumkovskiy S., Tsvetkov V., , in: 2026 International Russian Smart Industry Conference (SmartIndustryCon).: Sochi: IEEE, 2026. P. 529–536.
The present research is devoted to the development of a comprehensive solution that integrates software and hardware tools for modeling and reproduction of digital twins of structural components in radio-electronic equipment. Such an approach enables the automation of testing and analysis processes at the initial stages of engineering design. The implementation of this system has ...
Added: July 13, 2026
Sochi: IEEE, 2026.
2026 International Russian Smart Industry Conference (SmartIndustryCon) Copyright and Reprint Permission: Abstracting is permitted with credit to the source. Libraries are permitted to photocopy beyond the limit of U.S. copyright law for private use of patrons those articles in this volume that carry a code at the bottom of the first page, provided the per-copy ...
Added: July 13, 2026
Tsvetkov V., Lander L., Korolev P., Наноиндустрия 2025 Т. 18 № S11-3(135) С. 1219–1232
An analysis of current approaches for predicting the dependability of Industrial Internet of Things (IIoT) systems, including their strengths and limitations, has been carried out. As a result, an enhanced multi-factor method for evaluating dependability metrics in IIoT systems has been developed. ...
Added: October 6, 2025
Kostyuk A., Tsvetkov V., Korolev P. et al., Reliability: Theory and Applications 2025 Vol. 20 No. 3(86) P. 35–53
This paper presents a methodology for predicting dependability measures of swarm structures of unmanned aerial vehicles used in agriculture. The main attention is paid to the development of mathematical models for assessing the dependability of hardware, software, and communication systems in drone swarms. Two types of UAVs are considered in the paper: DJI Phantom 4 ...
Added: June 23, 2025
Korolev P., Polesskiy S., Tsvetkov V. et al., Стандарты и качество 2025 № 6(1056) С. 90–97
The work addresses the issue of not meeting the target dependability measures of electronic modules during their development by domestic enterprises. It is shown that Russia lacks tools such as methods, techniques,
and software for implementing the current principles of quality management. A methodology for conducting effective audits and assessing the quality of the technological process ...
Added: June 13, 2025
Kutuzov A., Богданова А. В., Высшее образование в России 2025 Т. 34 № 4 С. 118–143
Teamwork is an essential part of professional life and cooperation skills are necessary for students for successful employment. The main task of higher education is to increase the competitiveness of graduates in the job market by creating educational programs aimed at teamwork skills development. A reliable measurement method is needed to observe progress of these ...
Added: May 17, 2025
Tsvetkov V., Lander L., Kononova N., В кн.: Сборник тезисов работ международной молодежной научной конференции L Гагаринские чтения 2024.: М.: Перо, 2024. С. 226–227.
In modern radio-electronic devices there is a problem of discrepancy between the results of calculated estimation of dependability (failure-free) indices at the design stage and real statistics of failures during operation at the production stage. The difference of failure rates in the case of calculation and statistics is several orders of magnitude. There is also ...
Added: November 12, 2024
Tsvetkov V., Lander L., В кн.: Межвузовская научно-техническая конференция студентов, аспирантов и молодых специалистов имени Е.В. Арменского. Москва, 2024.: М.: ООО "Издательский дом Медиа паблишер", 2024. С. 359–361.
This study is devoted to the development of a method for assessing the dependability of industrial Internet of Things (IIoT) systems, which will improve the processes of predicting and controlling the dependability of devices, setting requirements for them at the design and production stages. The article reviews the methods used to calculate the dependability of ...
Added: November 12, 2024
Polesskiy S., Бушуев Н. И., Мкртчян Г. А. et al., В кн.: Технологии информационного общества. Сборник трудов XVIII Международной отраслевой научно-технической конференции «Технологии информационного общества». (27-28 февраля 2024 г. Москва, МТУСИ).: М.: МТУСИ, 2024. С. 67–69.
This paper describes a method for assessing the effectiveness of the quality management system (QMS) of an executive enterprise producing radio engineering equipment. Modern approaches to quality management are outlined. The design of a questionnaire for expert assessment is presented, and a characteristic of the developed system for auditing is given. ...
Added: November 11, 2024
V. Tsvetkov, L. Lander, P. Korolev et al., , in: 27th International Conference, DCCN 2024, Moscow, Russia, September 23-27, 2024, Revised Selected Papers. Distributed Computer and Communication Networks.: Switzerland: Springer, 2025. P. 19–35.
In this study, a methodology is proposed for evaluating the dependability measures of Industrial Internet of Things (IIoT) systems, incorporating assessment of hardware, network components, and software. The existing practical methods for assessing the dependability of IIoT systems, along with their respective strengths and limitations, are presented and critically analyzed. Based on the obtained data, ...
Added: November 1, 2024
Мырова Л. О., Korolev P., Антонович П. И. et al., Электросвязь 2024 № 4 С. 14–24
The paper shows that ensuring the artificial intelligence dependability and stability is one of the relevant tasks of ensuring the swarm structures dependability of small-size unmanned aerial vehicles (UAVs). Swarm structures of small-size UAVs have been analyzed. It is established that the existing models and methods for assessing the UAV swarms’ dependability are not effective ...
Added: July 9, 2024
Polesskiy S., Korolev P., Tsvetkov V., , in: 2023 International Russian Automation Conference (RusAutoCon) 10-16 Sept. 2023.: Sochi: IEEE, 2023. P. 662–668.
Научная статья посвящена исследованию влияния низких температур окружающей среды от –55 °С до +125 °С на показатели надежности тонкопленочных резисторов при их эксплуатации в составе радиоэлектронных средств. Проведен обзор и анализ справочников по надежности объектов исследования и научные работы известных авторов по предметной области, проанализированы математические модели оценки показателей безотказности объектов исследования и их физические ...
Added: November 14, 2023
Zhadnov V. V., Надежность 2022 Т. 22 № 3 С. 11–20
Objective. To propose an approach to assessing the parameters of a SPTA package for industrial uninterruptible power supplies according to their Data Sheet using modern techniques. Methods. The article uses methods of dependability theory, Markov process theory, optimization methods. Results. Using the proposed approach for trunk-modular uninterruptible power supplies with redundancy and restoration and limited spare parts, the stages of ...
Added: September 4, 2023
Korolev P., Polesskiy S., Tsvetkov V. et al., М.: КноРус, 2023.
The issues of occurrence of failures of computing and ways of dealing with them, the main indicators of reliability and mathematical methods for their evaluation are considered. Considerable attention is paid to the calculations of the reliability of computing systems at the design stages. Corresponds to the latest generation of Federal State Educational Standards. For ...
Added: November 9, 2022
Svetlana Z., Zhigulina E., Ilyin P., Lecture Notes in Networks and Systems 2021 Vol. 280 P. 495–499
The paper focuses on the key features of company management, including the use of tools for modeling business processes in the context of introducing quality management systems in the management structure of enterprises from the Russian oil and gas sector. When considering the issue of introducing a quality management system, it is not so much ...
Added: October 14, 2021
Sayedeh S. S., Abbott B., Thornton B. et al., Environmental Research Letters 2020 Vol. 15 No. 12 Article 124075
The continental shelves of the Arctic Ocean and surrounding seas contain large stocks of organic matter (OM) and methane (CH4), representing a potential ecosystem feedback to climate change not included in international climate agreements. We performed a structured expert assessment with 25 permafrost researchers to combine quantitative estimates of the stocks and sensitivity of organic ...
Added: October 6, 2021
Zhadnov V. V., , in: Information Innovative Technologies: Materials of the International scientific – рractical conference.: M.: Association of graduates and employees of AFEA named after prof. Zhukovsky, 2021. P. 207–211.
The report discusses the application of simulation modeling to dependability prediction of the restored equipment. A formal model is described that allows forming time diagrams of the states of both the components and the equipment as a whole. It is shown that the use of such a model allows us to estimate the availability function ...
Added: June 21, 2021
Kunizhev I., Korolev P., Ivanov I. et al., , in: 2021 International Seminar on Electron Devices Design and Production (SED).: IEEE, 2021. P. 1–4.
The research provides a review and analysis of the existing mathematical model of the pumping flashtubes operational failure rate. They are used in various spheres of human activity, such as: industry (laser welding, balancing devices), medicine (laser devices, endoscopes, blood analyzers), photography (high-speed cameras). A computational assessment was carried out using a decision support system, ...
Added: May 11, 2021
Korolev P., Sosnin A., Ivanov I., , in: 2021 International Seminar on Electron Devices Design and Production (SED).: IEEE, 2021. P. 1–5.
Automation of control methods of necessary requirements fulfilment or non-fulfilment while ensuring dependability and quality for wireless devices (WD) are necessary at design stages. However, this approach is not used in enterprises. Companies are limited only to expert assessment (non-automated external audit) and assessment of efficiency private criteria in the quality management system (QMS). The ...
Added: May 11, 2021
Комплексный метод оценки показателей безотказности радиотехнических устройств космической аппаратуры
Korolev P., Известия высших учебных заведений. Приборостроение 2021 Т. 64 № 4 С. 316–328
The paper presents the method for evaluating the electronic devices reliability indicators of spacecraft equipment. The method taking into account the following factors: the effectiveness of the quality management system functioning; compliance of the design results with the technical specification requirements; additional tests quality of the electronic devices; the quality of the implementation of the ...
Added: May 11, 2021