?
Интеллектуализация процесса проектирования цифрового образца модели одежды в трехмерной среде
M. :
-, 2024.
Туханова В. Ю., Андреева Е. Г.
Plotnikov S., Альманах современной метрологии 2024 № 2 (38) С. 140–149
The results of the analysis of data collected by the method of expert questioning of Russian scientific metrological institutes’ employees, as well as buyers of measuring instruments, are presented. ...
Added: May 21, 2026
Plotnikov S., Апрелев А. В., Апрелева М. А. et al., Альманах современной метрологии 2022 № 2 (30) С. 94–101
The results of the analysis of data from the Federal Information Fund for Ensuring the Uniformity of Measurements in terms of oscilloscopes are presented. ...
Added: May 21, 2026
Stepanyants V., Долгов И. М., Хорошилов Г. С. et al., Труды Института системного программирования РАН 2026 Т. 38 № 3 С. 95–110
Highly automated and connected vehicles are gradually entering the market. Currently, solutions are being proposed that allow these technologies to be used for cooperative driving automation, which can significantly improve traffic safety. Such technologies and their software should be tested to ensure safety before being implemented in real systems. Verification and validation of vehicular control ...
Added: May 12, 2026
Kanaev E., В кн.: Россия - Индонезия: историческое наследие и будущее сотрудничество.: М.: Институт востоковедения РАН, 2025. С. 168–188.
The chapter assesses Russia's and Indonesia's possibilities to intensify educational cooperation in the digital field. ...
Added: April 21, 2026
Kuvshinov A., Fominykh A., Ivanov F., IEEE Access 2026 Vol. 14 P. 50549–50557
The recursive (U|U+V) construction, a generalization of which includes polar codes, provides a powerful framework for building complex codes from simpler components. However, existing approaches predominantly rely on fixed or symmetric tree architectures, overlooking the critical impact of decomposition choice on code performance. This paper addresses the challenge of optimal tree decomposition selection by presenting a framework ...
Added: April 7, 2026
Manohin A., Электрооборудование: эксплуатация и ремонт 2026 № 2 С. 75–85
An extended method for calculating heat transfer coefficients using programs
for automated analysis of the thermal regime of TRIANA (ASONIKA-T) radio-electronic
equipment for various designs is proposed. Based on the analysis of the obtained
heat transfer coefficients, it is shown how to set realistic values for the convective
heat transfer coefficient in SOLIDWORKS Simulation and other CAE thermal analysis
systems. ...
Added: April 3, 2026
SciTePress, 2024.
This book contains the proceedings of the 21st International Conference on Informatics in Control, Automation and Robotics. This year, ICINCO is held in Porto, Portugal, on November 18-20, 2024. It was sponsored by the Institute for Systems and Technologies of Information, Control and Communication (INSTICC), and technically co-sponsored by the IEEE Systems, Man and Cybernetics ...
Added: March 17, 2026
IEEE, 2025.
On behalf of the organizing committee, it is our great privilege to present this compendium of research
articles for the 11th International Conference on Automation, Robotics, and Applications (ICARA 2025),
which will be held in the vibrant city of Zagreb, Croatia from February 12 to 14, 2025. The proceedings
encapsulate the latest advancements and innovative research in the ...
Added: March 17, 2026
Cham: Springer, 2026.
This book delivers actionable insights through 21 peer-reviewed chapters featuring new methods, models, and applications based on computational intelligence. Discover cutting-edge tools to support smart, efficient decision-making in complex, real-world scenarios. Organized into three parts—prescriptive analytics, soft computing models, and practical case studies—it spans domains such as healthcare, energy, mobility, finance, and public services. Readers ...
Added: March 17, 2026
Frolov O. V., Safin R. N., Tsoy T. G. et al., Ученые записки Казанского университета. Серия: Физико-математические науки 2025 Vol. 167 No. 4 P. 786–805
Advancements in robotics have expanded a use of unmanned aerial vehicle (UAV) swarms in
critical tasks such as disaster response, including search and rescue operations during floods, hurricanes,
landsliding, and earthquakes. Swarm formation control stands as a critical challenge in UAV swarm
control. In this article, a simple and resource-efficient method for addressing collisions within swarm
formations during outdoor ...
Added: March 17, 2026
Sulaiman S., Mustafin M., Li H. et al., , in: 10th International Conference, ICR 2025, Hanoi, Vietnam, November 10–13, 2025, Proceedings, Part II. Interactive Collaborative Robotics. (LNCS, volume 16304).: Springer, 2026. P. 105–119.
Prosthetic hands are vital assistive devices that significantly enhance quality of life for individuals with upper limb amputations, enabling them to regain autonomy and perform essential daily activities. However, many existing prosthetic solutions are hindered by high costs, excessive weight, and complex actuation systems that limit accessibility and usability. This paper introduces a novel prosthetic ...
Added: March 17, 2026
Springer, 2026.
The two volume set LNAI 16303 + 16304 constitutes the refereed proceedings of the 10th International Conference on Interactive Collaborative Robotics, ICR 2025, held in Hanoi, Vietnam, during November 10–13, 2025. The 58 full papers presented in these two volumes were carefully reviewed and selected from 143 submissions. The papers are organized in the following topical sections:
Part ...
Added: March 17, 2026
Springer, 2026.
This book includes selected papers from the Fifth International Conference on Agriculture Digitalization and Organic Production (ADOP 2025), held in Barnaul, Altai Region, Russia, during June 03-06, 2025. The topics covered in the book are ground robotic systems in crop production, unmanned aerial vehicles in crop production, aerospace monitoring tools in crop production, robotic animal ...
Added: March 17, 2026
Song J., Bai Y., Svinin M. et al., Artificial Life and Robotics 2026 P. 1–13
This study introduces an innovative control approach for deploying multiple unmanned aerial vehicles (UAVs) to monitor an unknown food region. The proposed strategy is designed to optimally distribute UAVs across the food-afected area while cooperatively estimating the extent of inundation. To achieve this, an adaptive coverage controller is developed based on Centroidal Voronoi Tessellation (CVT), incorporating a novel ...
Added: March 17, 2026
Sulaiman S., Safarova L., Imamov N. et al., , in: 6th International Conference, CIT&DS 2025, Volgograd, Russia, September 22–25, 2025, Proceedings. Creativity in Intelligent Technologies and Data Science. (CCIS, volume 2803).: Cham: Springer, 2025. P. 492–504.
Robotic injection devices represent a significant advancement in medical technology, aimed at improving efficiency and accuracy of drug delivery. By utilizing advanced mechanisms, healthcare professionals can administer treatments with greater ease, thereby enhancing patient comfort and compliance during medical procedures. In this paper, an injection device attached to a robotic arm has been designed for ...
Added: March 17, 2026
Kurtc V., Prokhorov A., Journal of Mathematical Sciences 2025 No. 295 P. 229–240
We present a methodology for calibrating doubly constrained gravity models. Three types of deterrence functions are examined: exponential, power, and combined. The latter includes two calibration parameters, whereas the others contain only one. The parameters are identified so that the model reproduces the observed trip length distribution with high accuracy. We test four optimization methods: ...
Added: March 12, 2026
Kiselev G., Prokhorov A., Journal of Mathematical Sciences. Vol. 295, No. 2, December, 2025. Mathematical Modeling and AI for Traffic Flows on Networks and Related Topics 2025 No. 295 P. 185–196
We study the problem of estimating the population and workplaces in a given area using open data sources and machine learning algorithms for automation and improvement of quality and accuracy of the transport demand calculation in transport modeling.
Bibliography: 6 titles. Illustrations: 7 figures. ...
Added: March 12, 2026
Терещенко Е. Ю., Белевских Т. В., Желнина З. Ю. et al., СПб.: Скифия-принт, 2024.
This textbook, "Art Management in Creative Spaces," offers a comprehensive exploration of contemporary creative spaces. Focusing on St. Petersburg, it analyzes the role of such spaces in fostering creative communities and their contribution to the broader creative environment. The book is structured into 12 chapters, covering the theoretical foundations and history of creative spaces, their ...
Added: March 10, 2026
М.: Международный центр «Новые научные исследования», 2025.
Сборник содержит статьи участников Международной научно-практической конференции «Научные открытия и инновационные стратегии», состоявшейся 24 мая 2025 г. в г. Москва.
В сборнике научных трудов рассматриваются современные научные проблемы и практики применения результатов научных исследований. Материалы сборника предназначены для научных работников, преподавателей, аспирантов, магистрантов, студентов в целях применения в научной работе и учебной деятельности. Ответственность за аутентичность ...
Added: February 18, 2026
Ali S., Khizhik A., Svirin S. et al., Engineering Applications of Artificial Intelligence 2025 Vol. 170 Article 114137
The application of machine learning algorithms in the intelligent diagnosis of three-phase engine has the potential to significantly enhance diagnostic performance and accuracy. Traditional methods largely rely on signature analysis, which, despite being a standard practice, can benefit from the integration of advanced machine learning techniques. In our study, we innovate by combining machine learning ...
Added: February 16, 2026
М.: ГАУГН-Пресс, 2023.
Право интеллектуальной собственности уже фактически стало самостоятельной отраслью законодательства, которая имеет свой собственный предмет правового регулирования — общественные отношения по поводу объектов интеллектуальных прав. В цифровую эпоху, эпоху бурного развития цифровых технологий значимость этих отношений как нельзя велика, а вопросы, требующие срочного разрешения, способствуют значительному росту объема нормативного материала, который может принадлежать различным отраслям права ...
Added: February 10, 2026
Русайнс, 2025.
В сборнике излагаются методические подходы к определению цифровой трансформации в экономических и социальных процессах в производственном, аграрном, финансовом секторах и услугах. С этой целью проведены анализы существующей инфраструктуры цифровой среды, цифровых платформ, выявлены различия в уровне и специфике цифрового потребления между жителями российских городов. На основе результатов анализа предложены методические рекомендации по выбору информационных технологий ...
Added: December 20, 2025
Mikirtumov I., Галактика медиа: журнал медиа исследований 2025 Т. 7 № 4 С. 127–153
This article discusses, first, the ideas expressed by Konstantin Ocheretyany, which characterize the crisis of contemporary commercialized emocracy. Second, I present my own version of the problem and its solution in the context of the philosophy of affects. It all looks as follows. Representations that replace things in the digital environment do not exert a ...
Added: November 11, 2025
Лескина Э. И., Законодательство 2025 № 10 С. 25–30
In this paper, the author analyses the criterion of activities’ orientation, which is determined by separate factors or (and) their combination. Such a criterion, as the article states, is considered as a widespread way for defining the jurisdiction in digital sphere. The article describes the specifics of determining the jurisdiction within disputes on personal data, ...
Added: November 8, 2025