?
Industrial Engineering in the Industry 4.0 Era. Selected Papers from ISPR2023, October 5-7, 2023, Antalya
Cham :
Springer, 2024.
Under the general editorship: D. Numan M., G. M. Güneş
This book contains selected papers from International Symposium for Production Research 2023, held on October 5–7, 2023, Antalya, Türkiye. The book reports recent advances in production engineering and operations. It explores topics including: production research; production management; operations management; Industry 4.0; Industry 5.0; industrial engineering; mechanical engineering; engineering management; operational research.
Presenting real-life applications, case studies, and mathematical models, this book is of interest to researchers, academics, and practitioners in the field of production and operation engineering. It provides both the results of recent research and practical solutions to real-world problems.
Chapters
Winata M., Peter Panfilov, , in: Industrial Engineering in the Industry 4.0 Era. Selected Papers from ISPR2023, October 5-7, 2023, Antalya.: Cham: Springer, 2024. P. 144–153.
Added: April 8, 2024
Starodubov K., Кривоногов А. А., Плоткин А. С. et al., Нано-био-технологии. Тепло- и электроэнергетика. Математическое моделирование: сборник статей III международной научно-практической конференции (Липецкий государственный технический университет, Липецк, Россия) 2025 С. 300–309
The paper considers the problem of assessing the criticality of defects in smart contracts, defines the constituent parameters of criticality of defects and substantiates their representation in the form of LR-type fuzzy numbers. An approach based on the use of LR-type fuzzy numbers and nonlinear optimization methods is proposed to assess the criticality of defects ...
Added: September 7, 2026
Starodubov K., Гвасалия Г. В., Карасев П. И., Нано-био-технологии. Тепло- и электроэнергетика. Математическое моделирование: сборник статей III международной научно-практической конференции (Липецкий государственный технический университет, Липецк, Россия) 2025 С. 219–223
This paper discusses the concept of neural networks, convolutional neural networks, their architecture and their operation principle. The main attention is paid to testing the reliability of storing images of people as embeddings, which are considered to be unrecoverable in the original image. In the course of the research an experiment is carried out: the ...
Added: September 6, 2026
Starodubov K., Шейкин В. В., Карасев П. И., XXI век: итоги прошлого и проблемы настоящего плюс 2026 Т. 15 № 2 (74) С. 20–25
The paper addresses the problem of formalized description of intruder behavior in government information systems. An approach based on hidden Markov models is proposed for modeling the actions of an intruder, where the stages of malicious activity are interpreted as hidden states and the events registered by the system are treated as observable symbols of ...
Added: September 6, 2026
Starodubov K., Максимова Е. А., Утешева Г. Ш. et al., Научно-аналитический журнал "Вестник Санкт-Петербургского университета Государственной противопожарной службы МЧС России" 2026 № 2 С. 92–103
When data are incomplete, standard fuzzy data mining methods face an unacceptable trade-off: deleting objects with missing values loses up to a third of the sample and introduces systematic bias under the MAR mechanism, while mean imputation destroys the covariance structure and produces rules with artificially inflated support. This paper proposes a different solution - ...
Added: September 6, 2026
Bubnova M., Chetverikov V., Pozhidaev E., Информационные технологии 2026 Т. 32 № 8 С. 404–413
A specialized methodology was developed, computer modeling was conducted, and a comparative analysis was performed for autonomous control methods for small spacecraft, differing in how the nonlinearity of the initial stabilization problem is taken into account:
— control constructed using a system of linear differential equations (SLDE);
— control constructed using SLDE applied to a more general ...
Added: September 2, 2026
Vagin S., Semenova G. N., Kelina K. G. et al., International Journal of Trade and Global Markets 2023 Vol. 18 No. 2-3 P. 217–229
The purpose of the paper is to justify the preferred marketing strategies of intellectual economic growth in the 'knowledge economy' based on advanced industry technology 4.0 for developed and developing countries. The originality of the paper is explained by the fact that it for the first time presents a view of intellectual economic growth in ...
Added: August 31, 2026
Starodubov K., Шейкин В. В., Безопасность. Управление. Искусственный интеллект 2026 Т. 3 № S3 С. 47–57
The article proposes a formal apparatus for risk analysis in information systems based on the apparatus of fuzzy logic, graph theory and matrices. A system of definitions is introduced that includes a universe of entities, sets of violators and destructive influences, as well as membership functions describing the fuzzy relationships between them. A risk calculation ...
Added: August 29, 2026
Воронеж: Издательский дом ВГУ, 2026.
В сборник вошли материалы XXXII Международной научно-технической конференции «Радиолокация, навигация, связь» (RLNC*2026), прошедшие ре цензирование членами программного комитета конференции. Основной целью конференции является организация взаимодействия научных и научно технических коллективов для обмена опытом и новыми творческими успехами. Достижение этой цели также способствует внедрению перспективных разрабо ток, имеющих практическое значение для дальнейшего развития промышленно сти, экономики ...
Added: August 29, 2026
Vagin S., , in: Industry 4.0: Exploring the Consequences of Climate Change.: Switzerland: Springer, 2021. P. 389–396.
Purpose: The purpose of the article is to study the experience and prospects of financial support for the energy security of the regional economy in the transition to Industry 4.0 in modern Russia. Design/methodology/approach: In order to test the hypothesis put forward, the article uses the methodology of economic statistics, using which regression models of financial ...
Added: August 27, 2026
Switzerland: Springer, 2021.
This book reflects the futuristic scientific view of the consequences of transition to Industry 4.0 for climate change. The authors present a systemic overview of the current negative consequences of digitization for the environment, new outlines of the energy sphere in Industry 4.0 and the change of the environment pollution level in Industry 4.0. The ...
Added: August 27, 2026
Romanov A., Физулин А. В., Stepanyants V., Московский транспорт. Наука и проектирование 2026 № 2 С. 77–90
The behaviour of connected automated vehicles in implementing cooperative safety functions
depends on the timely exchange of V2X messages. At the same time, the end-to-end impact of 5G NR-V2X
Mode 2 message delivery failures on vehicle behaviour requires evaluation not only by aggregated network
metrics but also by the timeliness of V2X message arrival within the time window ...
Added: August 25, 2026
Белгородский государственный технологический университет им. В.Г. Шухова, 2026.
В сборнике опубликованы доклады студентов, аспирантов и молодых ученых, представленные по результатам проведения Международной научно-технической конференции молодых ученых БГТУ им. В.Г. Шухова. Материалы статей могут быть использованы студентами, магистрантами, аспирантами и молодыми учеными, занимающимися вопросами энергоснабжения и управления в производстве строительных материалов, архитектурных конструкций, электротехники, экономики и менеджмента, гуманитарных и социальных исследований, а также в ...
Added: August 19, 2026
Междуреченск: Кузбасский государственный технический университет им. Т.Ф. Горбачева, 2026.
В сборнике представлены материалы докладов по направлениям Международной научно-практической конференции «Современные тенденции и инновации в науке и производстве»: 1. Технологии и инновации в горной промышленности; 2. Экономика, управление, финансы; 3. Информационные системы и технологии; 4. Юный исследователь. Целью этой конференции является обмен передовым опытом, повышения квалификации их участников и, вместе с тем, это способ установления и укрепления научного сотрудничества среди ...
Added: August 11, 2026
Scientific publishing house Infinity, 2026.
These Conference Proceedings combine materials of the conference –
research papers and thesis reports of scientifi c workers. They examine technical,
juridical and sociological aspects of research issues. Some articles deal
with theoretical and methodological approaches and principles of research
questions of personality professionalization. ...
Added: July 24, 2026
IEEE, 2025.
The 9th International Scientific Conference on Information, Control, and Communication Technologies (ICCT-2025) had been held October 7-11, 2025 in Gomel, Belarus. The main technical areas and applications covered by the proceedings are optoelectronics, acousto-optic, microwave technology, antenna systems, measuring technology, metamaterials, nanostructures, nanofilms, photonic crystals, biology and medicine, biophotonics, bioengineering, neural networks in communication technologies; ...
Added: June 23, 2026
Plotnikov S., Альманах современной метрологии 2024 № 2(38) С. 140–149
The results of the analysis of data collected by the method of expert questioning of Russian scientific metrological institutes’ employees, as well as buyers of measuring instruments, are presented. ...
Added: May 21, 2026
Апрелев А. В., Пивоварова Н. И., Plotnikov S. et al., Альманах современной метрологии 2022 № 2(30) С. 94–101
The results of the analysis of data from the Federal Information Fund for Ensuring the Uniformity of Measurements in terms of oscilloscopes are presented. ...
Added: May 21, 2026
Stepanyants V., Хорошилов Г. С., Долгов И. М. et al., Труды Института системного программирования РАН 2026 Т. 38 № 3 С. 95–110
Highly automated and connected vehicles are gradually entering the market. Currently, solutions are being proposed that allow these technologies to be used for cooperative driving automation, which can significantly improve traffic safety. Such technologies and their software should be tested to ensure safety before being implemented in real systems. Verification and validation of vehicular control ...
Added: May 12, 2026
Kharitonov I. A., Springer Publishing Company, 2026.
Presents recent advances in the areas of AI, robotics, computing, electronics, security, and communications
Provides the proceedings of Future Technologies Conference 2025 (FTC 2025)
Written by experts in the fields. ...
Added: April 7, 2026
Kuvshinov A., Fominykh A., Ivanov F., IEEE Access 2026 Vol. 14 P. 50549–50557
The recursive (U|U+V) construction, a generalization of which includes polar codes, provides a powerful framework for building complex codes from simpler components. However, existing approaches predominantly rely on fixed or symmetric tree architectures, overlooking the critical impact of decomposition choice on code performance. This paper addresses the challenge of optimal tree decomposition selection by presenting a framework ...
Added: April 7, 2026
Manohin A., Электрооборудование: эксплуатация и ремонт 2026 № 2 С. 75–85
An extended method for calculating heat transfer coefficients using programs
for automated analysis of the thermal regime of TRIANA (ASONIKA-T) radio-electronic
equipment for various designs is proposed. Based on the analysis of the obtained
heat transfer coefficients, it is shown how to set realistic values for the convective
heat transfer coefficient in SOLIDWORKS Simulation and other CAE thermal analysis
systems. ...
Added: April 3, 2026
Singapore: Springer, 2025.
This proceedings volume covers peer-reviewed papers of the 2nd International Conference on Management Information System which is held on Sept 28–30, 2024, in Tokyo, Japan. In an increasingly digitalized and connected world, management information systems are no longer serving resource planning, monitoring and reporting purposes. Indeed with the increasing availability of data from new sources, ...
Added: August 4, 2025
Komarov M. M., Springer, 2025.
This book contains the second volume of selected papers from International Symposium for Production Research 2024, held on October 10–12, 2024, in Budva, Montenegro. The book reports recent advances in production engineering and operations. This year's conference had the overarching theme of "Sustainable Green Conversion." The book explores topics including:
Simulation and Modelling,
Supply Chain and Logistics ...
Added: March 14, 2025
Springer, 2024.
This book collects selected aspects of recent advances and experiences, emerging technology trends that have positively impacted our world from operators, authorities, and associations from CCIE 2024, to help address the world’s advanced computing, control technology, information technology, artificial intelligence, machine learning, deep learning, and neural networks. Meanwhile, the topics included in the proceedings have ...
Added: February 19, 2025