?
Влияние мощного импульсного лазерного воздействия на структуру и свойства поверхностного слоя ванадия, предварительно облучённого ионами инертных газов (обзор)
Металлы. 2024. № 1. С. 42–52.
Боровицкая И. В., Коршунов С. Н., Мансурова А. Н., Bondarenko G., Гайдар А. И., Матвеев Е. В., Казилин Е. Е.
Das A., Saikia J., Maji N. et al., ChemNanoMat 2026 Vol. 12 No. 5 Article e202500733
Developing efficient photoactive materials from bio-derived resources is vital yet challenging for achieving effective water splitting performance. In this work, nano carbon dots (CDs) of zero-dimensional (0D) were synthesized from papaya peel through a simple and eco-friendly process and subsequently anchored onto the two-dimensional (2D) layered structure of graphitic carbon nitride (g-C3N4, GCN) at various ...
Added: June 2, 2026
Wary R. R., Mahato B., Sharma N. et al., The Journal of Physical Chemistry Letters 2026 Vol. 17 No. 17 P. 5099–5107
Development of heterojunction materials is an efficient approach for enhancing photocatalytic and photoelectrochemical processes. We develop a ZnO/CuO heterojunction via Cu doping into a ZnO matrix. Structural characterization confirmed that Cu was effectively incorporated into ZnO without any structural changes. The improved optical properties and reduced charge carrier recombination of the doped samples were confirmed ...
Added: June 2, 2026
Duran E. ., Pulgar A., Izquierdo R. et al., Physica Status Solidi (A) Applications and Materials 2026 Vol. 223 No. 7 Article e202500942
Ceramic superconductors exhibit remarkable properties, including zero electrical resistance and potent magnetic behavior, operating at temperatures as high as the boiling points of liquid nitrogen (77 K) and liquid hydrogen (20 K). These characteristics position them as key enablers for sustainable technologies spanning electric propulsion, lossless energy transmission, advanced medical imaging, and quantum computation. This review presents ...
Added: June 1, 2026
Plotnikov S., Альманах современной метрологии 2024 № 2(38) С. 140–149
The results of the analysis of data collected by the method of expert questioning of Russian scientific metrological institutes’ employees, as well as buyers of measuring instruments, are presented. ...
Added: May 21, 2026
Апрелев А. В., Пивоварова Н. И., Plotnikov S. et al., Альманах современной метрологии 2022 № 2(30) С. 94–101
The results of the analysis of data from the Federal Information Fund for Ensuring the Uniformity of Measurements in terms of oscilloscopes are presented. ...
Added: May 21, 2026
Андреев Д. В., Корнев С. А., Bondarenko G. et al., Перспективные материалы 2026 № 6 С. 5–11
Выполнено сравнительное исследование процессов сильнополевой зарядовой
деградации подзатворного диэлектрика структур металл-диэлектрик-полупроводник (МДП)
с алюминиевым и поликремниевым затвором. Зарядовые явления в МДП-структурах
изучали методом сильнополевой инжекции электронов в диэлектрик в режиме возрастания
плотности стрессового инжекционного тока с кратковременными переключениями
в измерительный режим при постоянной низкой плотности инжекционного тока.
Использование данного метода позволило получить новые данные о процессах зарядовой
деградации подзатворного диэлектрика МДП-структур с ...
Added: May 21, 2026
Rathish S., Andrey S. Vasenko, Thazhathenair A. et al., The Journal of Physical Chemistry Letters 2026 Vol. 17 No. 18 P. 5386–5394
We demonstrate and rationalize the effect of Au nanoparticles (NPs) on the hierarchical g-C3N4/CeO2 heterojunction. g-C3N4/CeO2 decorated with monodispersed plasmonic Au NPs was synthesized. Detailed analyses showed that CeO2 nanocubes and monodispersed Au NPs were evenly distributed over the 2D g-C3N4 surface, forming a robust interface enriched with abundant active sites. The structure enabled efficient separation of photogenerated charge ...
Added: May 16, 2026
Paul R., Das A., Sharma N. et al., Colloids and Surfaces A: Physicochemical and Engineering Aspects 2026 Vol. 728 Article 138830
Niobium-doped TiO2 (Nb-TiO2), demonstrates dual functionality as an efficient photocatalyst for dye degradation and a promising photoelectrocatalyst for water oxidation. Nb incorporation via a facile hydrothermal method was confirmed by XRD (Rietveld refinement), XPS, TEM, FT-IR, Raman, and BET analyses, indicating successful lattice doping and structural modification. Photocatalytic dye degradation experiments were conducted using a model ...
Added: May 16, 2026
Гущина В. А., / Series chemrxiv-2023-vpzhz-v2 "ChemRxiv". 2023.
All-inorganic perovskite CsPbBr3 and Cs4PbBr6 nanoparticles are being intensively studied due to their unique properties and wide range of applications; however, however, the nature of their optical properties is not yet fully understood due to the difficulty of synthesis of singlephase nanoparticles. In this article we describe the features of the synthesis of single-phase particles ...
Added: May 14, 2026
Гущина В. А., Mendeleev Communications 2025 Vol. 35 No. 2 P. 193–195
All-inorganic perovskite CsPbBr3 and Cs4PbBr6 nanoparticles are intensively studied for their unique optical properties, though synthesizing single-phase nanoparticles has posed challenges. Detailed synthesis method of CsPbBr3 and Cs4PbBr6 single-phase nanoparticles and their chemical and phase analysis are described. Distinctive optical characteristics, such as photoluminescence, optical band gap and the Urbach tail region, are revealed and explained within the current ...
Added: May 14, 2026
Гущина В. А., Physics of Complex System 2026 Vol. 7 No. 1 P. 3–15
Heterostructures based on ZnO nanorods and CsPbBr3 nanocrystals were investigated for their potential as semiconductor SERS substrates. We found that ZnO morphology governs the efficiency of interfacial energy transfer, leading to enhanced photoluminescence under 390 nm excitation and a noticeable reduction of the bandgap in the composites. Raman analysis revealed a pronounced intensity enhancement and ...
Added: May 14, 2026
Stepanyants V., Хорошилов Г. С., Долгов И. М. et al., Труды Института системного программирования РАН 2026 Т. 38 № 3 С. 95–110
Highly automated and connected vehicles are gradually entering the market. Currently, solutions are being proposed that allow these technologies to be used for cooperative driving automation, which can significantly improve traffic safety. Such technologies and their software should be tested to ensure safety before being implemented in real systems. Verification and validation of vehicular control ...
Added: May 12, 2026
Гущина В. А., Russian Journal of Inorganic Chemistry 2024 Vol. 69 No. 6 P. 940–948
Currently, ABX3 nanoparticles (NPs) based on lead halides attract the attention due to their unique optical properties and a wide range of applications. The preparation of NPs with lead as a partial or complete replacement is particularly interesting because of the toxicity of this chemical element and most of its compounds. In this study, we propose a ...
Added: May 6, 2026
Yasnitsky L., Голдобин М. А., Мезенцев А. С., Прикладная математика и вопросы управления 2025 № 2 С. 99–116
Представлен обзор современных методов и основанных на них программных
инструментах, применяемых для математического моделирования серийных производственных процессов с целью снижения брака и повышения качества производимых изделий. Перечисляются группы работ, нацеленных на обнаружение и классификацию дефектов, работ, в которых решаются задачи прогнозирования образования дефектов и определения значимости параметров, работ направленных на поиск
оптимального сочетания технологических параметров изготовления изделий, ...
Added: May 5, 2026
Morozov E. V., Demin A. S., Borovitskaya I. V. et al., Inorganic Materials: Applied Research 2026 Vol. 17 No. 3 P. 619–626
This article presents the results of experiments on the impact of powerful pulsed ion-plasma and
electron flows generated in the working chamber of the Plasma Focus PF-5M installation during each highvoltage
discharge on a model aluminum alloy B95. It is shown that the general characteristics of the alloy’s
damage upon exposure to pulsed flows of helium ions (HI) ...
Added: May 4, 2026
Pavlenko V. I., Bondarenko G.G., Cherkashina N. I. et al., Inorganic Materials: Applied Research 2026 Vol. 17 No. 2 P. 276–282
A composite material based on polyethylene, boron carbide (B4C), and bismuth oxide (Bi2O3) is
synthesized by the method of joint cryogenic milling of all components in liquid nitrogen environment followed
by pressing. The effect of cryogenic milling on the distribution of fillers in a composite is studied and
the prospects of using this method are assessed in comparison ...
Added: April 9, 2026
Kuvshinov A., Fominykh A., Ivanov F., IEEE Access 2026 Vol. 14 P. 50549–50557
The recursive (U|U+V) construction, a generalization of which includes polar codes, provides a powerful framework for building complex codes from simpler components. However, existing approaches predominantly rely on fixed or symmetric tree architectures, overlooking the critical impact of decomposition choice on code performance. This paper addresses the challenge of optimal tree decomposition selection by presenting a framework ...
Added: April 7, 2026
Manohin A., Электрооборудование: эксплуатация и ремонт 2026 № 2 С. 75–85
An extended method for calculating heat transfer coefficients using programs
for automated analysis of the thermal regime of TRIANA (ASONIKA-T) radio-electronic
equipment for various designs is proposed. Based on the analysis of the obtained
heat transfer coefficients, it is shown how to set realistic values for the convective
heat transfer coefficient in SOLIDWORKS Simulation and other CAE thermal analysis
systems. ...
Added: April 3, 2026
Черкашина Н. И., Павленко В. И., Bondarenko G. et al., Перспективные материалы 2026 № 4 С. 14–26
В данной работе представлен синтез гибкого полимерного композита для защиты от радиации на основе каучуковой матрицы и оксидов редкоземельных металлов, таких как Dy2O3 и Gd2O3, предназначенного для создания радиационно-защитных экранов и средств индивидуальной защиты. Исследованы его физико-механические характеристики: составы с добавлением оксида диспрозия имеют плотность от 1,31 до 2,44 г/см3, предел прочности при растяжении от ...
Added: April 2, 2026
Боровицкая И. В., Пименов В. Н., Коршунов С. Н. et al., Вопросы атомной науки и техники. Термоядерный синтез 2025 Т. 48 № 3 С. 135–146
Проведено исследование влияния мощного импульсного лазерного излучения (ЛИ), создаваемого в установке ГОС 1001 в режиме модулированной добротности с плотностью мощности потока, равной 1,0·1014 Вт/м2, длительно-стью импульса t = 50 нс, числом импульсов N от 1 до 8 на структуру и микротвёрдость поверхности образцов вольфрама, размещённых в вакуумной камере. Образцы облучены в исходном состоянии и после ...
Added: December 26, 2025
Боровицкая И. В., Пименов В. Н., Коршунов С. Н. et al., Поверхность. Рентгеновские, синхротронные и нейтронные исследования 2025 № 9 С. 81–88
Исследовано влияние предварительной имплантации ионов Не+ на морфологию и микротвердость поверхности сплава ванадия V–10Ti–6Cr–0.05Zr–0.1Si при последующем воздействии мощного импульсного лазерного излучения. Конструкционные малоактивируемые материалы на основе ванадия наиболее коррозионностойкие по отношению к Li. Они перспективны для реакторов с жидкостным вариантом бланкета, где литий является теплоносителем, а тритий — воспроизводимым материалом. Имплантацию в сплав ионов гелия ...
Added: December 14, 2025
Borovitskaya I. V., Korshunov S. N., Mansurova A. N. et al., Journal of Surface Investigation: X-Ray, Synchrotron and Neutron Techniques 2023 Vol. 17 No. 1 P. 59–65
The effect of high–power pulsed laser irradiation (LI) generated in the GOS 1001 installation in the modulated Q–factor mode (with a power density of q equal to 1.2 × 1012 W/m2, pulse duration t0 = 50 ns, number of pulses N from 1 to 4 in vacuum) on the porous structure of the vanadium samples ...
Added: March 26, 2023
Боровицкая И. В., Коршунов С. Н., Мансурова А. Н. et al., Поверхность. Рентгеновские, синхротронные и нейтронные исследования 2023 № 1 С. 67–73
Исследовано влияние мощного импульсного лазерного излучения, создаваемого в установке
ГОС 1001 в режиме модулированной добротности (плотность мощности потока q = 1.2 × 1012 Вт/м2,
длительность импульса τ0 = 50 нс, число импульсов N = 1–4) в вакууме, на пористую структуру поверхности образцов ванадия, сформированную после имплантации ионов гелия (энергия 30 кэВ,
доза 2.0 × 1023 м–2, плотность потока ...
Added: March 1, 2023
Kuznetsova S., Gorodishch I., Gak A. et al., Tetrahedron 2021 Vol. 82 Article 131929
Chiral titanium(IV) and vanadium(V) salen complexes were found to catalyse the synthesis of cyclic carbonates from carbon dioxide and epoxides. Reactions could be conducted at room temperature and 50 bar pressure of carbon dioxide or at 100 °C and atmospheric pressure with catalyst concentrations as low as 0.1 mol% and co-catalyst (tetrabutylammonium bromide) concentrations as low as 0.5 mol%. The cyclic carbonates ...
Added: January 31, 2023