?
Метод локальной маркировки металлической поверхности с помощью ультрадисперсных частиц минералов
Металлы. 2023. № 3. С. 73–80.
Междуреченск: Кузбасский государственный технический университет им. Т.Ф. Горбачева, 2026.
В сборнике представлены материалы докладов по направлениям Международной научно-практической конференции «Современные тенденции и инновации в науке и производстве»: 1. Технологии и инновации в горной промышленности; 2. Экономика, управление, финансы; 3. Информационные системы и технологии; 4. Юный исследователь. Целью этой конференции является обмен передовым опытом, повышения квалификации их участников и, вместе с тем, это способ установления и укрепления научного сотрудничества среди ...
Added: August 11, 2026
G. G. Bondarenko, Kristya V. I., Savichkin D. O. et al., Journal of Surface Investigation: X-Ray, Synchrotron and Neutron Techniques 2026 Vol. 20 No. 2 P. 417–423
A model of a glow gas discharge in a mixture of argon and mercury vapor is formulated in the presence
of a thin insulating film on the cathode surface. Dependences of the discharge characteristics on the
mixture temperature are calculated in the range of its variation, in which a noticeable contribution to ionization
of the working gas is ...
Added: August 1, 2026
Scientific publishing house Infinity, 2026.
These Conference Proceedings combine materials of the conference –
research papers and thesis reports of scientifi c workers. They examine technical,
juridical and sociological aspects of research issues. Some articles deal
with theoretical and methodological approaches and principles of research
questions of personality professionalization. ...
Added: July 24, 2026
Dmitry Vasilyev, Gorev V., Ikhsanov R. et al., Journal of Materials Science 2026 No. 61 P. 25452–25470
The orthorhombic phase of 𝛼-Mo2 C is a key component in electrocatalytic applications, as Mo2C-based catalysts can exhibit catalytic performance comparable to or exceeding that of noble metals. Despite its technological relevance, theoretical understanding of the anisotropy in the thermal expansion and related thermoelastic properties of 𝛼-Mo2 C remains limited. In this work, first-principles calculations ...
Added: July 23, 2026
Borovitskaya I. V., Pimenov V. N., Korshunov S. N. et al., Physics of Atomic Nuclei 2026 Vol. 89 No. 1 P. S48–S55
The effect of high-power pulsed laser radiation (LR) generated in the GOS 1001 setup in the
Q-modulated mode (with a flux power density q equal to 1 × 1014 W/m2, pulse duration t = 50 ns, and the
number of pulses N from 1 to 8 in vacuum) on the structure and microhardness of the surface of ...
Added: July 22, 2026
Kilinc N., ALI I., Economies 2026 Vol. 14 No. 7 Article 277
The increasingly rapid process of de-dollarization in the context of growing geopolitical fragmentation has significantly altered the monetary dynamics of the global economy, thereby posing important questions about economic resilience and sustainable development in the emerging world. This research investigates de-dollarization-related macro-financial conditions and their association with economic resilience in the BRICS+ countries during the ...
Added: July 14, 2026
IEEE, 2025.
The 9th International Scientific Conference on Information, Control, and Communication Technologies (ICCT-2025) had been held October 7-11, 2025 in Gomel, Belarus. The main technical areas and applications covered by the proceedings are optoelectronics, acousto-optic, microwave technology, antenna systems, measuring technology, metamaterials, nanostructures, nanofilms, photonic crystals, biology and medicine, biophotonics, bioengineering, neural networks in communication technologies; ...
Added: June 23, 2026
Г. Г. Бондаренко, Кристя В. И., Савичкин Д. О. et al., Поверхность. Рентгеновские, синхротронные и нейтронные исследования 2026 № 4 С. 29–36
Сформулирована модель тлеющего газового разряда в смеси аргона и паров ртути при наличии
на поверхности катода тонкой диэлектрической пленки. Рассчитаны зависимости характеристик
разряда от температуры в интервале ее изменения, в котором заметный вклад в ионизацию
рабочей газовой смеси дает ионизация атомов ртути метастабильными возбужденными атомами
аргона (реакция Пеннинга). Показано, что в случае катода без диэлектрической пленки при
повышении температуры до ...
Added: June 20, 2026
Zirnik G., Ostovari Moghaddam A., Zhukov S. et al., Journal of Materials Science: Materials in Electronics 2026 Vol. 37 Article 738
In regards to the advances in InGaZnO for flexible transistors applications, herein for the first time we measure the broadband radio-frequency range (10 Hz to 1 MHz) dielectric permittivity ε′ and electrical conductivity σ of InGaZnO4 nanoparticle layers at different temperatures ranging from 10 to 300 K. The InGaZnO4 nanoparticles prepared by metal–nitrate–glycol gel decomposition method exhibited ...
Added: June 6, 2026
Das A., Saikia J., Maji N. et al., ChemNanoMat 2026 Vol. 12 No. 5 Article e202500733
Developing efficient photoactive materials from bio-derived resources is vital yet challenging for achieving effective water splitting performance. In this work, nano carbon dots (CDs) of zero-dimensional (0D) were synthesized from papaya peel through a simple and eco-friendly process and subsequently anchored onto the two-dimensional (2D) layered structure of graphitic carbon nitride (g-C3N4, GCN) at various ...
Added: June 2, 2026
Wary R. R., Mahato B., Sharma N. et al., The Journal of Physical Chemistry Letters 2026 Vol. 17 No. 17 P. 5099–5107
Development of heterojunction materials is an efficient approach for enhancing photocatalytic and photoelectrochemical processes. We develop a ZnO/CuO heterojunction via Cu doping into a ZnO matrix. Structural characterization confirmed that Cu was effectively incorporated into ZnO without any structural changes. The improved optical properties and reduced charge carrier recombination of the doped samples were confirmed ...
Added: June 2, 2026
Duran E. ., Pulgar A., Izquierdo R. et al., Physica Status Solidi (A) Applications and Materials 2026 Vol. 223 No. 7 Article e202500942
Ceramic superconductors exhibit remarkable properties, including zero electrical resistance and potent magnetic behavior, operating at temperatures as high as the boiling points of liquid nitrogen (77 K) and liquid hydrogen (20 K). These characteristics position them as key enablers for sustainable technologies spanning electric propulsion, lossless energy transmission, advanced medical imaging, and quantum computation. This review presents ...
Added: June 1, 2026
Plotnikov S., Альманах современной метрологии 2024 № 2(38) С. 140–149
The results of the analysis of data collected by the method of expert questioning of Russian scientific metrological institutes’ employees, as well as buyers of measuring instruments, are presented. ...
Added: May 21, 2026
Апрелев А. В., Пивоварова Н. И., Plotnikov S. et al., Альманах современной метрологии 2022 № 2(30) С. 94–101
The results of the analysis of data from the Federal Information Fund for Ensuring the Uniformity of Measurements in terms of oscilloscopes are presented. ...
Added: May 21, 2026
Андреев Д. В., Корнев С. А., Bondarenko G. et al., Перспективные материалы 2026 № 6 С. 5–11
Выполнено сравнительное исследование процессов сильнополевой зарядовой
деградации подзатворного диэлектрика структур металл-диэлектрик-полупроводник (МДП)
с алюминиевым и поликремниевым затвором. Зарядовые явления в МДП-структурах
изучали методом сильнополевой инжекции электронов в диэлектрик в режиме возрастания
плотности стрессового инжекционного тока с кратковременными переключениями
в измерительный режим при постоянной низкой плотности инжекционного тока.
Использование данного метода позволило получить новые данные о процессах зарядовой
деградации подзатворного диэлектрика МДП-структур с ...
Added: May 21, 2026
Rathish S., Andrey S. Vasenko, Thazhathenair A. et al., The Journal of Physical Chemistry Letters 2026 Vol. 17 No. 18 P. 5386–5394
We demonstrate and rationalize the effect of Au nanoparticles (NPs) on the hierarchical g-C3N4/CeO2 heterojunction. g-C3N4/CeO2 decorated with monodispersed plasmonic Au NPs was synthesized. Detailed analyses showed that CeO2 nanocubes and monodispersed Au NPs were evenly distributed over the 2D g-C3N4 surface, forming a robust interface enriched with abundant active sites. The structure enabled efficient separation of photogenerated charge ...
Added: May 16, 2026
Paul R., Das A., Sharma N. et al., Colloids and Surfaces A: Physicochemical and Engineering Aspects 2026 Vol. 728 Article 138830
Niobium-doped TiO2 (Nb-TiO2), demonstrates dual functionality as an efficient photocatalyst for dye degradation and a promising photoelectrocatalyst for water oxidation. Nb incorporation via a facile hydrothermal method was confirmed by XRD (Rietveld refinement), XPS, TEM, FT-IR, Raman, and BET analyses, indicating successful lattice doping and structural modification. Photocatalytic dye degradation experiments were conducted using a model ...
Added: May 16, 2026
Сказочкин А. В., Bondarenko G., Перов В. Б., Металлы 2024 № 4 С. 75–84
Целью работы являлось исследование параметров износа и зависимости коэффициента трения от температуры в диапазоне от комнатной температуры до 110 0С поверхностных слоев образцов из рельсовой Стали 76, модифицированных по технологии минеральных покрытий, а также сравнительное исследование этих слоев с характеристиками сухого трения слоев, полученных методом лазерной наплавки сплавов разного состава. В статье представлены результаты испытаний ...
Added: September 3, 2024
Skazochkin A. V., Bondarenko G.G., Balash P. V., Russian Metallurgy (Metally) 2023 Vol. 5 P. 613–619
The article proposes a method for local marking of a metal surface with ultrafine particles of minerals. Photoluminescence and electronic acoustic resonance methods have been used to study local marks created by minerals and their mixtures using the technology of mineral coatings. It is shown that local areas of metal samples containing microparticles of minerals ...
Added: November 14, 2023
Skazochkin A. V., Bondarenko G.G., Zukowski P., Приборы и методы измерений 2020 Vol. 11 No. 3 P. 212–221
The aim of the article was to study the hardness of a metal surface modified with ultrafine particles of minerals by two different methods (instrumental indentation and Vickers hardness measurement) and a comparative analysis of the measurement results obtained by these methods.Standard Vickers hardness measurements at loads of 0.025, 0.1, and 0.5 kgf showed a ...
Added: September 23, 2020
Skazochkin A. V., Bondarenko G.G., Kislov S. V., Journal of Engineering Science and Technology Review 2018 Vol. 11 No. 6 P. 138–143
The work investigates some tribological parameters of the surfaces of friction pairs made of steel, with mineral layers. A comparative study of the friction coefficient of 18CrNiMo7-6 steel specimens with and without a mineral coating is
performed. The lowest friction coefficient value was achieved for samples with mineral coating, without HFC hard
surfacing before creating a mineral ...
Added: March 6, 2019
Kislov S. V., Kislov V. G., Balasch P. V. et al., IOP Conference Series: Materials Science and Engineering (MSE) 2016 Vol. 110 No. 012096 P. 1–5
The article describes the advantages of the new technology of mineral coating of metal products for the friction pair of mechanical systems. It presents the research results of the wear rate of the samples made of 12X13 steel (X12Cr13) with mineral layers, in the experiments with a piston ring sliding inside a cylinder liner with ...
Added: February 24, 2016