?
Correlation between optical fibre diameter and characteristics of tilted fibre Bragg grating-assisted sensors
Quantum Electronics. 2021. Vol. 51. No. 12. P. 1113–1117.
We report the results of studying the influence of fibre diameter on the accuracy and resolution of fibre refractive index sensors based on tilted Bragg gratings – a key element used to develop high-precision fibre sensors for environmental monitoring. A comparative study is performed using one of universal processing algorithms based on spectral envelope analysis. It is shown that the sensor accuracy drops with a decrease in the fibre cladding diameter. At the same time, an increase in the diameter deteriorates the spectral pattern contrast, which is a hindrance for developing highefficiency sensor elements.
Vergeles S. S., Vointsev I., Physics of Fluids 2026 Vol. 38 P. 024117-1–024117-8
We analytically consider the problem of the Langmuir instability. The instability describes emergence of transverse modulation of horizontal current with vertical shear, when it is superimposed on surface wave co-directional with the flow. Compared to the Craik–Leibovich scheme, we account for the scattering of surface wave on the modulated current, which is significant if the ...
Added: September 26, 2026
Frolov N. Y., Klokov A. Y., Sharkov A. I. et al., Applied Physics Letters 2026 Vol. 128 P. 092201-1–092201-5
Understanding the properties of two-dimensional material interfaces with the substrate is necessary for device applications. Surface acoustic wave propagation through a layered material flake on a substrate could provide unique information on the transverse rigidity of the flake-to-substrate interaction. Ultrasonic waves were generated by a focused femtosecond laser pulse at the surface of a model ...
Added: September 26, 2026
Войтович В. И., Makhov I., Мельниченко И. А. et al., Optics Letters 2026 Vol. 51 No. 17 P. 4872–4875
The influence of cavity surface passivation with SiO2 coating deposited by the plasma-enhanced chemical vapor deposition technique is investigated for injection microdisk lasers with an InGaAsN/GaAs quantum well active region. The electroluminescence spectra of the microdisk lasers with cavity diameters ranging from 12 to 32 μm with and without sidewall surface passivation were studied for a ...
Added: September 25, 2026
Бабичев А. В., Makhov I., Kryzhanovskaya N. et al., Оптика и спектроскопия 2026 Т. 134 № 3 С. 272–277
Представлены результаты по реализации генерации при повышенных температурах в лазерах с длиной волны генерации 980 nm на основе вертикального микрорезонатора с использованием непоглощающих на длине волны оптической накачки зеркал. Минимальная пороговая мощность накачки составила ~0.8 mW и соответствовала температуре 150 K. Добротность микрорезонатора, определенная на пороге генерации, превысила 13000. Максимальная рабочая температура микролазера составила 195 ...
Added: September 25, 2026
Бабичев А. В., Makhov I., Kryzhanovskaya N. et al., Письма в Журнал технической физики 2026 Т. 52 № 12 С. 40–43
Реализована одночастотная генерация при 300 K в лазерах на основе вертикального микрорезонатора. Для лазеров с полупроводниковым выводным зеркалом пороговая плотность мощности накачки составила 6.5 kW/cm2. Добротность микрорезонатора и длина волны излучения, определенные на пороге генерации, равнялись 8800 и ~ 959.8 nm. Применение конструкции микрорезонатора с гибридным выводным зеркалом позволило повысить добротность микрорезонатора (до 12 360) ...
Added: September 25, 2026
Бабичев А. В., Makhov I., Kryzhanovskaya N. et al., Письма в Журнал технической физики 2026 Т. 52 № 18 С. 30–34
Представлены результаты реализации генерации при комнатной температуре в планарных вертикальных микрорезонаторах на основе зеркал Al0.2Ga0.8As/Al0.9Ga0.1As. При 300 K пороговая плотность мощности и добротность на пороге генерации составили 11.4± 0.7 kW/cm2 и 5070± 160 соответственно. Двукратное превышение порога генерации привело к увеличению добротности микрорезонатора до 19 000. Эффективный латеральный теплоотвод подтвержден малым сдвигом энергии кванта, который составил ...
Added: September 25, 2026
Budkov Y., Kiselev M. G., Journal of Chemical Physics 2026 Vol. 165 No. 12 Article 124508
We develop a three-mode statistical-mechanical theory for a two-conformer
solute in a near-critical solvent. A compressible lattice model with
vacancies yields the Gaussian free-energy functional for a critical conserved
density, an orthogonal noncritical conserved mode, and the local conformer
fraction. Their couplings follow from packing and cohesive interactions,
rather than being introduced phenomenologically. Kawasaki transport of the
two conserved fields and ...
Added: September 24, 2026
Kryzhanovskaya N., Makhov I., Dragunova A., St. Petersburg Polytechnical University Journal: Physics and Mathematics 2026 Vol. 19 No. 1.1 P. 98–104
The planar microcavity structure was grown using molecular-beam epitaxy.
Single-mode lasing was observed at a wavelength of 960 nm for pillars with a diameter of
15 μm. At 300 K, the lasing threshold was approximately 30 mW. Increasing the pump
power to 2.7 times the threshold power resulted in a mode energy shift of approximately
1 meV. This shift ...
Added: September 23, 2026
Andreeva S., Gavrilov A. A., Dzhikirba K. R. et al., Physical Review B: Condensed Matter and Materials Physics 2026 Vol. 114 Article 134515
We examine plasma excitations with linear dispersion in a system of superconducting electrons in thin
NbN disks. Using frequency-domain terahertz spectroscopy, we study the evolution of plasmons up to critical
temperature Tc. The observed excitations tend to shift to the lower frequencies while temperature is increasing
and the spectral features vanish at T > Tc. We study the ...
Added: September 23, 2026
Образцова А. А., Ivanov K., Moiseev E. et al., Journal of Physics D: Applied Physics 2026 Vol. 59 No. 30 P. 305103
We demonstrate a thermo-optically tunable microlaser based on an InGaAs/GaAs quantum-dot (QD) active region employing a deformed limaçon-shaped cavity. The asymmetric geometry effectively lifts the degeneracy of high-Q whispering-gallery modes, enabling single-mode lasing. A side-mode suppression ratio exceeds 25 dB over a wide current range. Under continuous-wave electrical pumping, the device achieves a peak output power ...
Added: September 23, 2026
Budkov Y., Journal of Chemical Physics 2026 Vol. 165 No. 12 Article 124105
Exact theories of electrolyte structure must satisfy the nonlocal constraints imposed by electrostatic screening, yet these constraints are most commonly formulated only for homogeneous bulk systems and at the level of two-point correlations. Here, we develop a unified field-theoretic framework that extends them to general inhomogeneous ionic fluids and nonlinear charge correlations. Using a standard ...
Added: September 22, 2026
Боровицкая И. В., Пименов В. Н., Коршунов С. Н. et al., Перспективные материалы 2026 № 10 С. 37–54
Проведено сравнение, обобщение и систематизация механизмов эрозии и разрушения
поверхности малоактивируемых материалов, перспективных для использования в
качестве материалов вакуумной камеры термоядерных реакторов: ванадия, его сплава
V – 10 Ti – 6 Cr – 0,05 Zr – 0,1 Si и вольфрама при последовательном воздействии на
них ионных и тепловых потоков. Тепловые потоки имитировали с помощью мощного
импульсного лазерного излучения (ЛИ), создаваемого ...
Added: September 22, 2026
Iontsev M.A., Mukhin S. I., Fistul M. V., Physical Review B: Condensed Matter and Materials Physics 2016 Vol. 94 No. 17 P. 174–510
We report a theoretical study of the ac response of superconducting quantum metamaterials (SQMs), i.e., an array of qubits (two-level systems) embedded in a low-dissipative resonator. By making use of a particular example of a SQM, namely the array of charge qubits capacitively coupled to the resonator, we obtain a second-order phase transition between an ...
Added: September 22, 2026
Shilov A. L., Elesin L., Kravtsov M. et al., Nature Communications 2026 Vol. 17 No. 1 Article 9734
Identifying the microscopic processes limiting conductivity is essential for understanding correlated quantum materials. In twisted bilayer graphene, metallic resistivity follows ρ ~ Tα with widely varying α, fueling competing interpretations from phonon-limited transport and umklapp scattering to strange metallicity and heavy-fermion renormalization. Here, we use terahertz excitation to selectively heat electrons while keeping the lattice cold, separating ...
Added: September 20, 2026
Kozii R. R., Gritsenko T. V., Khan R. I. et al., , in: 2024 International Conference Laser Optics (ICLO).: IEEE, 2024. P. 241–241.
We propose a new cryothermal setup for testing and comparison fiber optic tilt sensors in extremely-low temperature conditions. The setup makes possible simulating the required temperature conditions, investigating fiber optic tilt sensors accuracy characteristics and tracing trends of the sensors operation when ambient temperature decreases to critical low values. ...
Added: January 30, 2026
Popov S. M., O. V. Butov, Bazakutsa A. P. et al., Results in Physics 2020 Vol. 16 Article 102868
We report on random lasing observed with 5-m-long Er-doped fiber comprising an array of weak fiber Bragg gratings (FBGs) inscribed in the fiber core and uniformly distributed over the whole fiber length. The laser design ensures domination of dynamical population inversion grating over the FBGs in total distributed feedback enabling laser stabilization and nonlinear laser ...
Added: October 21, 2022
Tomyshev K. A., Manuilovich E. S., Tazhetdinova D. K. et al., Sensors and Actuators, A: Physical 2020 Vol. 308 Article 112016
The paper is devoted to the tilted fiber Bragg grating (TFBG)-assisted fiber refractometer. A novel math-ematical method for the automatic analysis of its signal is proposed. A change in the refractive indexis associated with a hange in the cut-off wavelength, which is determined from the envelopes of thesensor’s transmission spectrum. Distinctive features of the proposed approach ...
Added: October 21, 2022
Dolzhenko E., Tomyshev K., Oleg V. Butov, Physica Status Solidi - Rapid Research Letters 2020 Vol. 14 No. 12 Article 2000435
A new technique of depositing a poly(vinyl alcohol) (PVA) coating with an airbrush on the cylindrical surface of an optical fiber with real-time spectral monitoring is presented. The method is applied for creating hygroscopic PVA coating as a part of the tilted-fiber Bragg-grating (TFBG)-assisted fiber hygrometer samples. By monitoring the transmission spectra of the samples ...
Added: October 21, 2022
Oleg V. Butov, Przhiialkovskii D., Results in Physics 2021 Vol. 30 Article 104902
The paper presents a novel multi-pass point-by-point method for high-precision inscription of fiber Bragg gratings
with a femtosecond laser radiation. The dynamics of the gratings formation is demonstrated in comparison
with the classical method of UV-radiation inscription. It is shown that due to the feasibility of the inscription
dynamics control, it is possible to fabricate high-precision Bragg gratings ...
Added: October 21, 2022
Попов С. М., Butov O., Колосовский А. О. et al., Квантовая электроника 2021 Т. 51 № 12 С. 1101–1106
We report the latest results on inscribing extended fibre Bragg grating (FBG) arrays upon fibre drawing, obtained at the Kotelnikov Institute of Radioengineering and Electronics of RAS. The properties of these structures are considered, and examples of their application in sensor systems of microwave dense wavelength multiplexing and as a basis for designing single-frequency fibre ...
Added: October 21, 2022
Chubchev E., Tomyshev K., Nechepurenko I. et al., Journal of Lightwave Technology 2022 Vol. 40 No. 9 P. 3046–3054
Fiber optic sensors are applied in industry, remote sensing, environmental monitoring and healthcare. A special place is occupied by tilted fiber Bragg gratings, which can significantly expand the capabilities provided by standard Bragg sensors. But these gratings have complex spectral responses, therefore, data processing becomes a critical task for achieving maximum performance. In this paper, ...
Added: October 21, 2022
Rybaltovsky A. A., Sverchkov S. E., Vel'miskin V. V. et al., Optics and Laser Technology 2022 Vol. 151 Article 108049
Optical and laser properties of a new Er/Yb-doped composite optical fiber manufactured according to the “rodintube” technique are presented. The fabricated composite fiber with a standard outer diameter of 125 μm was
single-mode at the wavelength of 1.55 μm. A Fabry-Perot laser cavity was manufactured on a 25 mm long fiber
segment using the femtosecond technique of ...
Added: October 21, 2022