In book
Zaichenko N. A., Иванов С. И., Линьков А. Я., Шереметова В. В., Табачникас Б. И. М.: Вита-Пресс, 2010.
Radaev V., Kotelnikova Z., Kuskova V., М.: Издательский дом НИУ ВШЭ, 2021.
Первое комплексное исследование, оценивающее социально-экономический вклад Системы Coca-Cola в странах - участницах ЕАЭС (Армении, Беларуси, Казахстане, Кыргызстане и Российской Федерации) за 2015-2020 гг., выполненное Лабораторией экономико-социологических исследований НИУ ВШЭ по заказу ООО "Кока-Кола Софт Дринк Консалтинг". Анализируется вклад в долгосрочные инвестиции, ВВП, налоговую сферу, занятость, развитие сети локальных поставщиков, расширение потребительского выбора и повышение качества ...
Added: September 2, 2024
Галанов В. А., Galanova A., Вестник Российского экономического университета им. Г.В. Плеханова 2024 Т. 21 № 2(134) С. 116–125
Robotization of goods production and service rendering means the necessity of gradual transition to training specialists of new profiles characterized by increasing complexity of work. Material sphere, as production robots are introduced in it will change into the sum total of fields of complicated work application, which include engineering of consumer goods, constructing of robots, ...
Added: June 24, 2024
Golovanova S., Krekhovets E., Проблемы прогнозирования 2024 № 2 С. 165–177
The purpose of this study is to quantify the potential need of the Russian economy for plastics and plastic products in the medium term against the backdrop of sanctions imposed on the country. Modeling was carried out for scenarios of complete and partial loss of imports of plastic products as a result of sanctions and assuming the replacement ...
Added: May 14, 2024
Vurganov M., Псковский регионологический журнал 2023 Т. 19 № 4 С. 32–48
Diversification of energy exports in favor of the countries of the Asia-Pacific region in a tense geopolitical situation is one of the most important tasks for Russia. The characteristics of the current state of the oil and gas markets in the Asia-Pacific region are presented. The analysis made it possible to estimate the shares of ...
Added: May 13, 2024
Петрова-Вербицкая Ю. Е., Filonovich S. R., Фуколова Ю. В. et al., М.: Издательский дом НИУ ВШЭ, 2023.
Настоящий дайджест - пятый в серии регулярных тематических выпускоы высшей школы бизнеса НИУ ВШЭ "Новое в менеджменте". Сборник представляет собой обзор главных мировых тенденций в менеджменте, которые будут развиваться в 2024 году. Авторы проанализирвали несколько сотен аналитических отчетов международных консалтинговых компаний, докладов государственных регулирующих органов, статистических опросов, а также публикаций в крупнейших зарубежных деловых и управленческих ...
Added: February 20, 2024
Данилин А. О., Ибатулин М. Ю., Мутина Е. И. et al., Системы управления и информационные технологии (Российская Федерация) 2023 № 4(94) С. 56–62
В работе рассмотрены проблемы, которые при печати методы послойной наплавки, их причина, действие, обеспечение возникновения для их ограничения, представлен алгоритм модификации дефектов 3D-печати, а также набор тестовых моделей и алгоритмов автоматизированного определения оптимальных параметров печати на основе компьютерного зрения и машинного обучения. ...
Added: January 12, 2024
Ipatieva I., Российский журнал менеджмента 2022 Т. 19 № 4 С. 572–591
This article is devoted to the peculiarities of managing the perishable stock of a manufacturing enterprise. The author analyzes the applicability of the classical model for determining the optimal delivery lot for perishable raw materials. In the work, the systematization and analysis of existing modifications of the EOQ model and their applicability in various situations ...
Added: May 23, 2022
Prokhorov V., Медведев В. А., Чирухин В. А., М.: КноРус, 2021.
The issues of organization and operational planning in the field of logistics process management in procurement, production and distribution, as well as issues of organization and management of warehousing, inventory management of material resources are considered.
The conceptual apparatus of the considered logistics systems and technologies is analyzed. The issues of designing a warehousing system, building ...
Added: November 28, 2021
Danilova L., Shpilev D. A., Вестник Пермского национального исследовательского политехнического университета. Социально-экономические науки 2021 № 4 С. 141–154
В последнее время представителям малого бизнеса непросто вести предпринимательскую деятельность в соответствии с принципами социальной ответственности и устойчивого развития. В России малое предпринимательство, хотя и не оказывает существенного влияния на экономические процессы во всем обществе, но путем создания рабочих мест выполняет социально значимые функции и является, например, для жителей небольших населенных пунктов одним из немногих ...
Added: October 17, 2021
Толкачев П. А., Российский гуманитарный журнал 2019 Т. 8 № 2 С. 107–117
Предметом исследования настоящей работы является связь инновации со сферой стартап-предпринимательства. В работе сравниваются значения инновации в индустриальную эпоху, в которую это понятие возникло, и в наступившую эпоху информационного общества, в которой понятие инновации обретает более широкий смысл, учитывающий не только технологический аспект производства продукта, но также и сферы маркетинга и менеджмента. Метод, применяемый в работе, ...
Added: January 19, 2021
Prabhu S., Daim T., Meissner D., , in: Innovation Management in the Intelligent World: Cases and Tools.: Cham: Springer, 2020. Ch. 12 P. 181–198.
Supplier selection is an important function of a manufacturing company. The supplier choice directly affects the cost and the competitive edge in the market. But what happens when there are multiple suppliers, various criteria, and ambiguous parameters to be considered. Supplier selection can be defined as the process of finding the right suppliers with the right quality at the ...
Added: January 18, 2021
Kechiev L., М.: Грифон, 2021.
В настоящем инженерном пособии в лаконичном виде изложены базовые правила конструирования многослойных печатных плат (МПП). Имеющиеся публикации по данной проблеме рассматривают соответствующие вопросы с той или иной детальностью, что во многих случаях затрудняет практикующему инженеру вычленить главные правила конструирования, которые необходимы для его проекта. В предлагаемом руководстве рассмотрены все основные стадии проектирования МПП: выбор материалов, ...
Added: December 7, 2020
Gurkov I. B., Kokorina A. O., Saidov Z., Journal of East-West Business 2020 Vol. 26 No. 4 P. 365–390
The paper describes a new form of investment attraction recently introduced in Russia—territories of outrunning socio- economic development (TOSEDs). These initiatives provide tax and other benefits to 20 territories in the Far East and to 90 cities in which a considerable number of jobs are concen- trated in a single factory (mono-cities). Using secondary sour- ...
Added: May 26, 2020
Gershman M., Thurner T., Chudaeva M., Creative Industries Journal 2020 Vol. 13 No. 3 P. 244–258
Industrial design as a driver for innovation is increasingly attracting attention throughout different disciplines. In order to switch from the oil-led development model to an innovation-driven economy, Russia attempts to strengthen its manufacturing industry through support policies for engineering and industrial design capabilities. The programme ‘Development of engineering activities and industrial design in Russia’ is ...
Added: February 3, 2020
Kochetkova E., Pokidko P., Scandinavian Economic History Review 2019 Vol. 67 No. 3 P. 269–282
This article examines the industrial wastes and environmental effects of Soviet technological development through the history of the Karelian Isthmus, a border territory that had previously been Finnish. Focusing primarily on the history of two large enterprises – the Svetogorskii (former Enso) and Sovetskii (former Johannes) pulp and paper making plants, the authors illustrate the ...
Added: January 24, 2019
Аничкина О. А., Капустина Н. В., Коровяковский Д. Г., Известия высших учебных заведений. Технология текстильной промышленности 2016 № 5(365) С. 101–105
The article outlines the main problems of development of flax growing. The basic ways to address the identified shortcomings in the context of the sanctions influence. Indicated the significance of the innovative directions of development of the industry of flax cultivation for the Tver region. ...
Added: December 28, 2018
Gurkov I. B., Morgounov E. B., Saidov Z. et al., Форсайт 2018 Т. 12 № 2 С. 24–35
We present the dynamics of the position of Russian manufacturing subsidiaries of Western MNCs in 2012–2016. The analysis is based on interviews with the heads of subsidiaries, a repeated survey of plant managers and on secondary data on subsidiaries’ activities. We propose a new portfolio model that desalinates “the core” and “the periphery” of the ...
Added: June 28, 2018
Matveenko V., Korolev A. V., International Journal of Computational Economics and Econometrics 2017 Vol. 7 No. 4 P. 323–358
We study game equilibria in a network, in each node of which an economy is described by a two-period model of endogenous growth with production and knowledge externalities. Each node obtains an externality produced by the sum of knowledge in neighbour nodes. Uniqueness of the inner equilibrium is proved. Ways of behaviour of agent (passive, ...
Added: October 24, 2017
Vnukov A., Циплаков В. В., В кн.: Математическое моделирование в прогнозируемых системахВып. 15.: М.: Горная книга, 2017. Гл. 4 С. 25–32.
The object of the study is the activity of the enterprise during the long-term period and its management through the simulation system. The purpose of the work is to create the structure of the simulation system and tools for managing the activities of the enterprise. In the course of the work, various management strategies and ...
Added: August 23, 2017
Кузнецова А. И., Новиков М. А., Транспортное дело России 2013 № 6-2 С. 245–248
Статья посвящена исследованию факторов, которые на современном этапе развития экономических отношений обуславливают уровень рентабельности производства промышленных товаров. Рассмотрены российские и зарубежные теории, проанализированы точки зрения различных авторов и школ, выявлены их достоинства и недостатки. Предложена авторская структурно-логическая модель факторного анализа рентабельности продукции промышленного предприятия, в которой отдельный акцент сделан на финансовых факторах и источниках их ...
Added: April 12, 2017
Korneychuk B. V., М.: Юрайт, 2016.
Учебник содержит изложение традиционного курса микроэкономики: теорию спроса и предложения, теорию поведения потребителя, теорию фирмы, теорию ресурсных рынков, теорию общего равновесия, теорию общественных благ, теорию общественного выбора. Подробно рассмотрены проблемы ценовой дискриминации, несовершенной конкуренции и асимметрии информации. К каждой главе приведен список основных терминов и понятий, контрольные вопросы и задания, имеется глоссарий. ...
Added: June 21, 2016
Valencia: IATED Academy, 2016.
INTED2016 Proceedings 10th International Technology, Education and Development Conference March 7th-9th, 2016 — Valencia, Spain ISBN: 978-84-608-5617-7 ISSN: 2340-1079 Deposito Legal: V-337-2016 Dear INTED2016 participants, Welcome to this 10th anniversary of INTED! We wish to express our most sincere thanks for being part of this inspiring forum of knowledge exchange. It ...
Added: April 4, 2016