?
Моделирование резонатора пьезогироскопа в системе APM WinMachine
САПР и графика. 2008. № 4. С. 93-97.
Vinogradov A., Matveev E. V.
Kechiev L., Kuznetzov V. V., Abrameshin A. E., Технологии электромагнитной совместимости 2014 № 1(48) С. 46-52
Charged board model (CBM) is considered. CBM is specific case of charged device model ESD event. The case of lowering components CDM rating, reported by other researchers, is considered. ESD current waveform experimaetal measurements and simulations were performed. Experimental and simulation results are in good match ...
Added: April 28, 2014
Zakhariev I., Journal of Physics: Conference Series 2021 Vol. 1740 P. 1-6
Superplastic blow forming is a technology of shell parts production. The development of these processes requires computer simulation which cannot be realized without accurate parameters of the applied material. This characterization can be based on results of free bulging tests. Characterization techniques utilize the models of the dome growth during the bulging test. This study ...
Added: January 27, 2021
Mamontov A. V., Nazarov I., Nefedov V. N. et al., Медицинская физика 2012 № 4 С. 87-93
The results of microwave influence aimed at the temperature rise in local area in multilayered biological tissues are given. the experimental results of temperature distribution in multilayered biological tissue are presented at the electromagnetic field frequency of 2450MHz. The model and analytic calculations for the temperature distribution inside the biological tissue are presented. The calculation ...
Added: March 18, 2013
Chumachenko E. N., Aksenov S. A., Bober S. A., Методи розв'язувания прикладних задач механiки деформiвного твердого тiла 2010 № 11 С. 299-304
Статья посвящена способам задания контактного взаимодействия при моделировании задач обработки металлов давлением. Проведено сравнение наиболее распространенные зависимости, применяемые для описания контактного взаимодействия. Предложен метод быстрой реализации трения при имитационном моделировании с помощью метода конечных элементов. Сравнение результатов использования различных законов трения при описании контактного взаимодействия в задаче выдавливания цилиндрических заготовок из титанового сплава ВТ3 1 ...
Added: April 12, 2012
Kechiev L., Шатов Д. С., Технологии электромагнитной совместимости 2014 № 3(50) С. 36-44
In article features of designing of the distributed power supply system are considered, modelling of untying condensers as a part of distributed to the power supply system is spent, the approach to construction of the distributed power supply system is described ...
Added: October 1, 2014
Bondarenko G., Fisher M. R., Kristya V. I., Journal of Physics: Conference Series 2012 Vol. 406 No. 012031 P. 1-6
Simulation of electron, ion and metastable excited atom motion and interactions in a low-current discharge between the flat electrodes of a gas- discharge device in argon-mercury mixture is fulfilled. Also influence of gas temperature on both densities and fluxes of particles has been investigated. Distributions of the particle densities along the discharge gap under different ...
Added: January 17, 2013
Yasnitsky L., Вестник Пермского университета. Серия: Математика. Механика. Информатика 2012 № 3(11) С. 73-79
Излагается точка зрения автора на некоторые приоритетные вопросы в области развития и применения метода конечных элементов. Излагается алгоритм применения метода конечных элементов с диагонализированными матрицами разрешающих СЛАУ в задачах термогравитационной конвекции жидкости. Приводится пример применения алгоритма для решения технической проблемы получения высококачественных стальных отливок методом математического моделирования. ...
Added: December 6, 2012
Бондаренко Г.Г., Бонк О. Г., Кристя В. И., Поверхность. Рентгеновские, синхротронные и нейтронные исследования 2003 № 4 С. 70-73
Рассчитан диффузионный перенос вещества, распыляемого с поверхности электрода в тлеющем разряде переменного тока. Получено выражение, описывающее плотность потока распыленного вещества, возвращающегося на распыляемую поверхность. Установлено, что при определенных условиях поток распыленного вещества, возвращающегося на электрод, практически стационарен при нестационарном его распылении. ...
Added: November 25, 2013
Иванов И., Красивская М. И., Лышов С. М. et al., Качество. Инновации. Образование 2015 № 12 С. 59-67
The paper describes block diagram of the prototype of information and measuring system on the base of technology NI RIO, which consists positioning table with the drives for operation of touch temperature sensor, dose for conductive paste, control module and specialized software, which is realized in the sphere of graphic programming NILabVIEW ...
Added: February 26, 2016
Shalumov A. S., Чабриков С. В., Шалумова Н. А., Динамика сложных систем 2012 Т. 6 № 2 С. 103-108
In article possibilities of a subsystem of the analysis and maintenance of thermal characteristics of designs of radio-electronic means ASONIKA on construction of thermal models at which there is a heat exchange by radiation are considered. Subsystem possibilities on construction of thermal models of designs of the radio-electronic means containing radiators of cooling of semi-conductor ...
Added: November 26, 2012
Vnukov A., Шабном М., Вестник Российского университета дружбы народов. Серия: Инженерные исследования 2014 № 3 С. 38-46
The article discusses the mathematical model of the forward task of kinematics, inverse, positioning capture of the robot is considered. Software implementation of the task allowed conducting the study of convergence and accuracy solution of inverse problem selecting the initial values and randing of angles on each iteration and geting graphs of dependencies accuracy of ...
Added: July 26, 2014
Borisov N., Kasatkin A., Presnyakov S., T-Comm: Телекоммуникации и транспорт 2019 Т. 13 № 2 С. 4-10
The task is to sharply reduce the complexity of analysis, multivariate analysis and parametric optimization of linear and linearized equivalent electrical circuits. The source of such schemes are not only linear electronic circuits, but also circuits formed on the basis of artificial electrical analogies. They can be formed on the basis of finite element methods ...
Added: March 1, 2019
Madera A. G., Современные наукоемкие технологии 2018 № 9 С. 61-65
Предложен метод анализа тепловых процессов в технических системах, основанный на псевдорешении уравнений математической модели, описывающей нестационарные и нелинейные тепловые процессы. Метод позволяет определять наилучшее решение уравнений математической модели по критерию минимума суммы квадратов разности правой и левой частей уравнений. Метод разработан для тепловой модели тепловых процессов в технических системах, основанной на концепции системы изотермических тел, ...
Added: October 29, 2018
Войтеховский А. А., Vetrov V. A., Студенческая аудитория 2007 № 2 С. 61-63
Создаваемая система автоматизированного проектирования вакуумных систем VaCAD содержит информацию и инструменты для проектирования от начальных этапов до создания рабочей документации. Подсистемы и модули VaCAD позволяют синтезировать принципиальную схему, проводить расчеты и моделирование, создавать рабочую документацию. ...
Added: September 3, 2012
Yurin A., Kartsev E., Dmitriev A., Метрология. Ежемесячное приложение к научно-техническому журналу «Измерительная техника» 2013 № 11 С. 15-20
Considered the principle of operation, advantages and disadvantages of resonator sensors. Proposed a method of correction of complementary errors of resonator sensors. An experimental research of the proposed method on the string resonator sensors of linear displacements. ...
Added: January 13, 2014
Yasnitsky L., Пермь : Пермский государственный национальный исследовательский университет. – Электронные данные. , 2020
The collection contains materials from the international conference "Intelligent systems in science and technology" and the Sixth all-Russian scientific and practical conference "Artificial intelligence in solving urgent social and economic problems of the XXI century", which was held on October 12-18, 2020 in Perm as part of the Perm natural science forum "Mathematics and global ...
Added: December 4, 2020
Aksenov S. A., Chumachenko E. N., Сырчина О. О., Вестник Воронежского государственного технического университета 2011 Т. 7 № 11.2 С. 62-64
В работе рассмотрены два варианта калибровок валков для прокатки прутка круглого сечения диаметром 20 мм из прутка диаметром 55 мм. Первый – классическая калибровка «овал - круг». Второй – комбинация прокатки на гладкой бочке и в круглых калибрах. С помощью аналитических уравнений были рассчитаны черновые варианты калибровок. Полученные формы калибровок использовались при моделировании процесса прокатки ...
Added: April 12, 2012
Бондаренко Г.Г., Коржавый А. П., Кристя В. И. et al., Металлы 1997 № 3 С. 154-157
Получено аналитическое выражение, описывающее распределение концентрации распыления атомов в цилиндрической камере газоразрядного распылительного устройства. Рассчитанные на его основе величины потоков распыленных атомов на стенке камеры удовлетворительно согласуются с результатами экспериментальных измерений. ...
Added: December 6, 2013
Лемешко Н. В., М. : МИЭМ, 2012
В учебном пособии рассмотрены основы проектирования элементов топологии тонкопленочных гибридных интегральных микросхем. Освещены вопросы расчета пассивных элементов ГИС, принципы проектирования топологии, даны справочные материалы, необходимые для топологического и конструкторского проектирования ГИС. ...
Added: November 29, 2012
Bondarenko G., Fisher M. R., Kristya V. I., Bulletin of the American Physical Society 2010 Vol. 55 No. 7 P. 50-50
In the paper simulation of electron, ion and metastable excited atom motion and interactions in a low-current discharge in argon-mercury mixture is fulfilled. Mixture ionization coefficient and the electric field strength have been calculated. ...
Added: May 13, 2013
Запорожье : ЗМИ, 1992
Added: April 5, 2014
Kofanov Y. N., М. : Энергоатомиздат, 2014
В данной монографии изложены основы менеджмента качества и надёжности радиоэлектронных средств (РЭС), соответствующие требованиям международных стандартов ИСО серии 9000. Рассмотрены требования современных информационных технологий моделирования к системам менеджмента качества и надёжности РЭС. Показана необходимость введения комплексного менеджмента, обусловленного появлением новой информации в результате комплексного моделирования взаимосвязанных физических процессов в РЭС. Новая информация позволяет создавать РЭС ...
Added: March 29, 2015
Polesskiy S., Artyukhova M. A., Reliability: Theory & Applications 2012 Vol. 7 No. 4 P. 90-101
The paper describes the calculation method of reliability and conservability products class of chemical current sources (CCS) in the design to the specific conditions in the electronic means. The technical specification for the indicators of CCS reliability are for specific operation modes and their use in the calculation gives a large error. In the U.S. ...
Added: February 7, 2013
Andreev D. V., Bondarenko G.G., Andreev V. V. et al., Journal of Physics: Conference Series 2021 Vol. 1740 Article 012034
We have modeled the charge effects in radiation MOS sensors functioning in a wide range of electric fields including high-field injection of electrons into the dielectric film. In order to study the charge effects taking place in MOS sensors, we use an extended model suggested by us previously. The extended model, besides the accumulation of ...
Added: January 26, 2021