?
Способ определения параметров датчиков уровня заправки жидкостных ракет методом переменного тока
Труды МАИ. 2019. № 107. С. 1–21.
Balakin S., Сербинов Д. Л.
Viacheslav K., Русский инженер 2024 № 3 С. 34–37
Analysis of various methods referred to the increasing energy efficiency and movement safety through the use of
control systems which take into account the force factors of interaction of the wheel propeller with the supporting surface. During
the analysis of methods dedicated to energy efficiency rise and were used techniques of logical and statistical analysis. There are
various ...
Added: May 19, 2026
Гущина В. А., / Series chemrxiv-2023-vpzhz-v2 "ChemRxiv". 2023.
All-inorganic perovskite CsPbBr3 and Cs4PbBr6 nanoparticles are being intensively studied due to their unique properties and wide range of applications; however, however, the nature of their optical properties is not yet fully understood due to the difficulty of synthesis of singlephase nanoparticles. In this article we describe the features of the synthesis of single-phase particles ...
Added: May 14, 2026
Qin X., Deng Y., Shchur L. et al., / Series arXiv "math". 2026. No. 2603.02962.
We perform a Monte Carlo analysis of the Ising model on many three-dimensional lattices. By means of finite-size scaling we obtain the critical points and determine the scaling dimensions. As expected, the critical exponents agree with the three-dimensional Ising universality class for all models. The irrelevant field, as revealed by the correction-to-scaling amplitudes, appears to ...
Added: April 20, 2026
Pilé I., Deng Y., Shchur L., / Series arXiv "math". 2026. No. 2604.10254.
We investigate the spatial overlap of successive spin configurations in Markov chain Monte Carlo simulations using the local Metropolis algorithm and the Svendsen-Wang and Wolff cluster algorithms. We examine the dynamics of these algorithms for two models in different universality classes: the Ising model and the Potts model with three components. The overlap of two ...
Added: April 20, 2026
Левенков Я. Ю., Чичекин И. В., Вдовин Д. С. et al., Труды НАМИ 2025 № 1 (300) С. 17–30
Введение (постановка задачи и актуальность). В настоящее время широкое распространение получило использование автономных мобильных беспилотных транспортно-технологических средств (БТТС) при выполнении работ в зонах с вредными и опасными факторами. Также данные машины могут быть использованы для выполнения поисково-спасательных работ, доставки грузов в труднодоступные районы и иных подобных задач. Поэтому к таким БТТС предъявляются повышенные требования к ...
Added: April 16, 2026
Карцев А. И., Physics of Metals and Metallography 2025 Vol. 125 No. 14 P. 1935–1939
The problem of the maximum oscillation frequency of composite bimetallic microactuators excited by thermal pulses has been theoretically investigated. Both traditional bimetallic composites made of metals and alloys with different coefficients of thermal expansion and composites in which one of the layers is made of a mechanically pre-stressed shape memory alloy (SMA) and the other ...
Added: March 16, 2026
Mikolaenko V., Конюшенко М. Н., Стулков Л. Д., Механическое оборудование металлургических заводов 2025 № 2(25) С. 23–30
Uniaxial tensile testing of flat specimens under superplastic conditions is widely used to determine the deformation behavior of materials. However, the standard interpretation of the results relies on the hypothesis of an ideal uniaxial stress state and often fails to account for the influence of specimen geometry and material flow from the gripping zones to ...
Added: March 5, 2026
Yasnitsky L., Голдобин М. А., Мезенцев А. С., Прикладная математика и вопросы управления 2025 № 2 С. 99–116
Представлен обзор современных методов и основанных на них программных
инструментах, применяемых для математического моделирования серийных производственных процессов с целью снижения брака и повышения качества производимых изделий. Перечисляются группы работ, нацеленных на обнаружение и классификацию дефектов, работ, в которых решаются задачи прогнозирования образования дефектов и определения значимости параметров, работ направленных на поиск
оптимального сочетания технологических параметров изготовления изделий, ...
Added: February 15, 2026
Chernyshov D., Satanin A., Shchur L., / Series arXiv "math". 2025.
We investigate the boundary separating regular and chaotic dynamics in the generalized Chirikov map, an extension of the standard map with phase-shifted secondary kicks. Lyapunov maps were computed across the parameter space (K,K(α, τ)) and used to train a convolutional neural network (ResNet18) for binary classification of dynamical regimes. The model reproduces the known critical ...
Added: November 21, 2025
Baimova J., Bessonov N., Krivtsov A. et al., Physical Review E - Statistical, Nonlinear, and Soft Matter Physics 2024 Vol. 110 No. 6 Article 065004
We present analytical and numerical investigations of the size and shape evolution of localized disturbances during their propagation in elastic media (furthermore, we refer to this process as energy dispersion). We consider two models of media: the continuum, described by the multidimensional wave equation, and the simple scalar harmonic lattice. The presented research is based ...
Added: November 12, 2025
Dmitriy Demin, Ilya Grebenkin, Alexey Barinov, International Journal of Advanced Manufacturing Technology 2025 Vol. 141 P. 1847–1858
In this paper, a computer simulation of round wire drawing processes with different equations of state for steel A12 has been carried out. In addition, the methods of improving the configuration of neural networks based on a multilayer perceptron (MLP) for estimating the distributions of residual stress tensor components have been investigated. The study demonstrated ...
Added: November 6, 2025
Zharkevich O., Berg A., Reshetnikova O. et al., Fluids 2025 Vol. 10 No. 8 Article 211
This article presents a comprehensive experimental and theoretical study and substantiation of the hydraulic parameters of a prototype multi-gear pump. The proposed pump design, which features one drive gear and four driven gears, aims to address the common disadvantages of traditional gear pumps, including radial force imbalance, uneven flow, high acoustic noise, and increased fluid ...
Added: November 6, 2025
Afanasiev V., Куприянов А. О., Неусыпин К. А., Авиакосмическое приборостроение 2025 № 9 С. 37–45
The problem of a zero-sum differential stabilization game with a quadratic performance functional is considered. The navigation system of an aircraft, including a platform inertial navigation system with structural correction using a control algorithm, is investigated. Errors of the navigation system, subject to the influence of uncontrolled disturbances, are described by a nonlinear ordinary differential ...
Added: November 1, 2025
R V., P H., Seralan V. et al., Fractal and Fractional 2022 Vol. 6 No. 10 Article 591
This study presents an extended dissipative analysis of fractional order fuzzy networked control system with uncertain parameters. First, we designed the network-based fuzzy controller for the considered model. Second, a novel Lyapunov-Krasovskii functional (LKF) approach, inequality techniques, and some sufficient conditions are established, which make the proposed system quadratically stable under the extended dissipative criteria. ...
Added: October 15, 2025
Semakov S., Semakov I., IEEE Transactions on Aerospace and Electronic Systems 2022 Vol. 58 No. 6 P. 5425–5442
We propose the method for calculating the probability of a safe landing for ship-based aircraft. We define a safe landing as the event that the initial touch of the landing surface by an aircraft occurs on a given segment of the deck, and at the time of this contact, the phase coordinates of the aircraft ...
Added: August 9, 2025
Семаков С. Л., Семакова М. В., Автоматика и телемеханика 2023 № 3 С. 126–138
This paper considers aircraft landing on a carrier. We propose two schemes for calculating, first, the probability of a go-around due to disengaging the arresting gear and, second, the maximum descent of the aircraft’s trajectory with respect to the deck level immediately after leaving the deck. The instant to increase the aircraft’s thrust before touching ...
Added: August 8, 2025
Семаков С. Л., М.: Наука, 2005.
В могографии излагается взгляд на теорию случайных процессов как инструмент математического моделирования. В первой главе рассматриваются основные классы и характеристики случайных процессов; вторая посвящена выбросам случайных процессов: задачам о пересечениях и касаниях фиксированного уровня, экстремумах, первом достижении границ заданной области; третья - приложениям математических результатов в авиации. Ядром второй и третьей глав работы являются результаты ...
Added: August 5, 2025
Sergei L. Semakov, Cambridge Scholars Publishing, 2019.
The behavior of any real system is a process to a greater or lesser degree probabilistic. As a rule, it is impossible to specify exactly which external influences and internal mechanisms of interaction of the system components will be decisive in the future. As a consequence, we cannot accurately predict the behavior of the system. ...
Added: August 3, 2025
Yasnitsky L., Голдобин М. А., Прикладная информатика 2025 Т. 20 № 3(117) С. 85–100
Currently, artificial intelligence methods are widely used in the practice of serial production enterprises. They are used to detect defects, classify and eliminate them, identify the causes of defects, predict the quality and properties of the resulting product, select optimal parameters of the production process, and identify and study its patterns. However, outside the field ...
Added: July 10, 2025
Yasnitsky L., Мартыненко С. В., Поленова М. С. et al., Литейное производство 2025 № 7 С. 35–41
An artificial intelligence system (AIS) has been created based on a neural network trained on data from the production process of steel castings weighing up to 500 kg obtained by the open-hearth method. The AIS has 20 input parameters characterizing the chemical composition of the metal, melting parameters, out-of-furnace steel treatment modes, season, meteorological conditions, ...
Added: July 10, 2025
Плотников М. Ю., Ушанов С. А., Куничкин Д. П. et al., Оптический журнал 2025 Т. 92 № 8 С. 51–61
Subject of study. The paper presents the results of experimental investigation of the method of suppression of fading noise of a coherent optical reflectometer based on synchronous frequency-hopping of the optical source. Aim of study. The main goal of the work was to improve the accuracy of measurements of a coherent optical reflectometer using the ...
Added: June 23, 2025
М.: Издательство "Перо", 2023.
Международная молодёжная конференция «Гагаринские чтения» в 2023 году прошла в 49-й раз. Конференция является площадкой для обсуждения научных исследований молодых учёных в области инновационных высокотехнологичных технологий по аэрокосмическому направлению. Выступление в научных секциях конференции для многих участников является шагом к написанию кандидатской диссертации, возможностью рассказать о своих научно-исследовательских и опытно-конструкторских работах, узнать о трендах и ...
Added: April 20, 2025
М.: Издательство "Перо", 2022.
The conference book includes abstracts which were sent to organizing committee in electronic form. ...
Added: April 20, 2025
IOS Press Ebooks, 2024.
Knowledge and expertise are constantly advancing in material science technology and engineering applications, and it is vital for those whose work involves the use of such technology to keep abreast of recent developments. This book presents the proceedings of MMSE 2024, the 10th International Conference on Advances in Machinery, Material Science and Engineering Application, held on ...
Added: February 19, 2025