?
New generation APS systems for demanding planning environments
Ch. 1. P. 60–69.
Solodovnikov V. V., Konvicka D.
The paper examines strategically important management tool - Advanced Planning and Scheduling systems (APS systems) and their efficiency in Demanding Planning Environment. The key characteristics of Demanding Planning Environments are systematized: the uniqueness of the technological processes; high complexity and scope; limited ability to describe and low predictability; high volatility and change sensitivity. The new generation of APS systems is defined. The comparative analysis of the planning systems of several generations (MRP II, APS I, APS II) is provided. Finally, examples of implementations of the new generation APS systems at Trinicke Zelezarny, Czech Republic; TimkenSteel, USA; VSMPO-AVISMA Corporation, Russia are provided.
In book
Issue 2. , University of Belgrade, Technical Faculty in Bor, Department of Engineering Management, 2018.
Tikhonov E., Schneps-Schneppe D., Namiot D., , in: Proceedings of the 26th Conference of Open Innovations Association FRUCT.: IEEE, 2020. P. 438–448.
The article is devoted to the analysis of the effectiveness of the DTN (Delay Tolerant Network) system in a communication network on a railway line. Trains act as moving objects that are sending and receiving messages to/from an external network. As well trains may transmit telemetry, collected during movement. The article presents data on effectiveness ...
Added: April 9, 2022
Sergeyev V., Sergeev I., Логистика и управление цепями поставок 2021 № 6 С. 3–8
The terminology of digitalization in supply chain management (SCM) is reviewed, in particular, a summary of definitions of the concept of "digital supply chain" is given. The digital supply chain model developed by Deloitte and the reference model of digital supply chain is presented and analyzed. The advantages of digital supply chain in terms of ...
Added: March 4, 2022
Solodovnikov V. V., Логистика и управление цепями поставок 2018 № 1 (84) С. 86–95
This article is a continuation of the series of articles devoted to the creation of industry-specific practical methodology of supply chain planning of industrial enterprises (on the example of iron and steel complexes).
The article presents the results of a survey of the process of operational planning of supply chains for metallurgical enterprises. Based on the ...
Added: May 9, 2020
Yermolina M., В кн.: Перспективы развития логистики и управления цепями поставок: сборник научных трудов VII Международной научной конференции 18 апреля 2017 г.Ч. 1.: М.: Эс-Си-Эм Консалтинг, 2017. С. 308–320.
It has been long acknowledged that sales and operations planning is of a great importance and value for a business. Nonetheless, every year surveys and reports prove that only a half of all businesses are satisfied with the process and refer to it as successful and effective. This leads to a natural question: what exactly ...
Added: September 12, 2018
Solodovnikov V. V., Konvicka D., , in: Foundry 2018. Proceeding of the XXV International Scientific and Technical ConferenceIssue 1 (2).: Sofia: Scientific Technical Union of Mechanical Engineering "INDUSTRY-4.0", 2018. P. 3–6.
The paper analyzes melt shop and caster scheduling at special steel maker – Trinecke Zelezarny. The main optimization objectives of melt shop and caster scheduling are defined as: minimization of earliness and lateness of orders, maximization of tundish utilization, minimization of steel grade changes and minimization of mold width changes, minimization of stock, minimization of over grading, management ...
Added: April 30, 2018
Fridkin S., Логистика и управление цепями поставок 2017 № 8 (41)
В условиях динамично изменяющегося рынка технология S&OP является обязательным базисом сквозного планирования в большинстве компаний. Для эффективного запуска и эксплуатации данной технологии, в свою очередь, необходима глубокая подготовка, основные элементы которой описаны в статье. Такая подготовка позволит предупредить ряд распространённых проблем. Составляющими её элементами являются стандартизация объектов управления, регламентация процесса планирования и адаптация информационного обеспечения. ...
Added: November 20, 2017
Editions Elsevier, 2017.
The 20th World Congress of the International Federation of Automatic Control IFAC 2017,Toulouse, France ...
Added: October 20, 2017
Yermolina M., Новикова А. Ю., Логистика и управление цепями поставок 2016 № 2(73) С. 45–55
An integrated volume planning in the form of sales and operations planning is considered as a default universal method applicable to any business in any industry. Meanwhile, numerous researches on implementation of this process focus mainly on the downstream industries, such as automotive, FMCG etc, leaving the upstream extractive industries without due attention. But the ...
Added: July 10, 2016
Постернакова М.И., Логистика и управление цепями поставок 2015 № 3(68) С. 44–53
В рамках данной статьи проведен детальный анализ понятия логистический бизнес-процесс сквозь призму формирования экономических взаимоотношений в контексте истории и сравнения различных научных подходов к повышению эффективности управления не только отдельными предприятиями, но и их цепями поставок. Автор рассматривает взаимосвязь информационного и материального потоков в контексте высокого уровня динамичности внешней среды. В статье обоснована необходимость перехода ...
Added: December 9, 2015
Pei J., Pardalos P. M., Liu X. et al., Journal of Industrial and Management Optimization 2015 Vol. 11 No. 2 P. 399–419
This paper investigates a three-stage supply chain scheduling problem in the application area of aluminium production. Particularly, the first and the third stages involve two factories, i.e., the extrusion factory of the supplier and the aging factory of the manufacturer, where serial batching machine and parallel batching machine respectively process jobs in dierent ways. In ...
Added: September 10, 2014
Yermolina M., Логистика и управление цепями поставок 2013 № 6 С. 53–59
В статье рассматривается понятие интегрированного или совместного исполнения в цепи поставок, которое «замыкает цикл» интегрированного планирования, превращая его в полностью совместный процесс управления. Даётся обзор факторов, которые заставляют компании обращаться к совместному исполнению, рассматриваются составляющие этого процесса, а также положительные эффекты от его внедрения. ...
Added: February 8, 2014
Yermolina M., Логистика 2012 № 12 С. 46–49
В статье рассматривается методика расчёта экономического эффекта от внедрения интегрированного планирования. Для этого предполагается учитывать взаимосвязь показателей эффективности цепи поставок, и осуществлять замеры ключевых показателей до начала проекта внедрения. На основании полученных замеров, и имея представление о том, на какие именно причины низкой эффективности влияет интегрированное планирование, можно рассчитать предполагаемую отдачу от его внедрения на ...
Added: February 12, 2013
Zaykov A. Y., Логистика и управление цепями поставок 2009 № 2(31) С. 14–20
Informational systems for supply chain planning - APS (Advanced Planning Systems) are functional extensions of the ERP (Enterprise Resource Planning) for executing integrated supply chain planning. The article surveys functional modules of such APS system as SAP APO (Advanced Planner and Optimizer). ...
Added: February 10, 2013
Yermolina M., Логистика и управление цепями поставок 2012 № 4 С. 61–70
Author examines the impact of integrated planning and, spesifically, sales and operations planning (S&OP) on balancing and reconciliation of market requirements and operations capabilities. Two levels of planning – operational and tactical – are taken into consideration, and results of balancing attempts on each of them are compared. An outline of new approach to the ...
Added: January 26, 2013