?
Analysis of Copropagating Electron Beams Interaction in a Smooth Waveguide
P. 1–2.
Mozgovoi Y. D., Khritkin S. A., Evdokimov Y. V.
Linear theory methods of the coupled spacecharge waves for copropagating electron beams considering coefficients of electron interaction and a reduction of plasma oscillations are developed. Interaction of copropagating electron beams promising to amplification of microwaves in electron mode regimes to create devices of millimeter and submillimeter wavelength ranges. Equations of the coupled waves are written down and solutions of the dispersive equation in coupling regime of three and four waves are received. Large signal modes are investigated within model of large particles which has carried out the trajectory analysis of interaction processes of two copropagating electron beams with differ energy. Features of interaction modes with the gain and no gain waves are considered.
In book
L.: IEEE, 2017.
Presnyakov S., Kasatkin A., Kravchenko N., , in: 2024 Systems of Signal Synchronization, Generating and Processing in Telecommunications (SYNCHROINFO).: IEEE, 2024. P. 1–6.
This study investigates the electrodynamic characteristics of "folded waveguide"-type slow-wave structures (SWSs) within the G-band (75-110 GHz) and W-band (110-300 GHz) frequency ranges. These SWSs are favored for high-frequency applications due to their advantages: higher gain, broader operating bandwidth, compact size, versatility, and simpler fabrication compared to structures like coupled cavities. Using HFSS software for ...
Added: September 10, 2026
Presnyakov S., Kasatkin A., Natalya Kravchenko, , in: 2024 IEEE 9th All-Russian Microwave Conference (RMC).: IEEE, 2024. P. 467–471.
In this paper, axially-symmetric coupled-cavity slow-wave structures (CCSWS) in the millimeter range are investigated. Using the algorithm which allows to take into account the presence of the transit channel in the SWS, the electrodynamic characteristics for cases with and without the channel present in the model are calculated. The influence of the transit channel dimensions ...
Added: September 10, 2026
Yurin A., International Journal of Applied Glass Science 2026 Vol. 17 No. 2 Article e70022
This article presents a three autocollimation method (TAM) for measuring the refractive index (RI) of optical glass. The popular minimum deviation method (MDM) for RI measurement is accurate, but it is very laborious, since the procedure of determining the minimum possible angle requires many iterations. TAM allows the calculation of RI based on the measurement ...
Added: January 23, 2026
S. A. Presnyakov, A. D. Kasatkin, N. P. Kravchenko, , in: 2024 Systems of signals generating and processing in the field of on board communications.: IEEE, 2024. P. 1–6.
In this paper, the slow-wave structures (SWSs) of the “chain of coupled cavities”-type (CCC) were investigated. This type of SWS is widely used for designing the microwave amplifying devices due to their excellent heat dissipation properties allowing for higher output power. The influence of the transit channel, where the electron beam propagates, on the electrodynamic ...
Added: September 14, 2024
Gayduchenko I., M.: Our Style, 2023.
The abstracts of reports of the 5th International Conference “Terahertz and Microwave Radiation: Generation, Detec- tion and Applications” (TERA-2023). TERA-2023 conference is devoted to the discussion of fundamental and applied problems related to the generation and detection of terahertz and microwave radiation as well as its interaction with matter. The purpose of the conference is ...
Added: February 12, 2024
Yurin A., Вишняков Г. Н., Minaev V., Компьютерная оптика 2024 Т. 48 № 2 С. 225–230
Dispersion characteristics of optical glass are considered. An approach to research of dispersion characteristics of optical glass is proposed, requiring the measurement of the refractive index at only three wavelengths, which simplifies the measurement process compared with the use of the widely used Sellmeier equation. An approximation function for the refractive index of optical glass ...
Added: January 2, 2024
S. A. Presnyakov, A. D. Kasatkin, N. P. Kravchenko, , in: 2023 Systems of Signal Synchronization, Generating and Processing in Telecommunications (SYNCHROINFO).: IEEE, 2023. P. 1–4.
In this paper, the slow-wave structure (SWS) of the “folded waveguide” -type was considered. This SWS is widely used for designing the devices in higher frequencies like millimeter and sub millimeter ranges due to its compactness, increased interaction length, reduced transit time effects, lower voltage requirements, and wide bandwidth. The calculation of its electrodynamic characteristics, ...
Added: October 16, 2023
G. O. Silaev, Krasheninnikov V., A. T. Shaidulin et al., Physics of Wave Phenomena 2023 Vol. 31 No. 3 P. 160–170
A comparative study of the sizes and spatial structure of single dielectric colloidal nanoparticles of lanthanum fluoride, doped with rare-earth neodymium ions (Nd3+:LaF3), and their conglomerates in an aqueous solution has been performed. Nanoparticles were synthesized by aqueous co-precipitation method with subsequent hydrothermal microwave (HTMW) treatment. Experiments were performed using three methods: transmission electron microscopy ...
Added: September 5, 2023
Mamontov A. V., Nefedov V. N., Nazarov I. et al., Measurement Techniques 2021 Vol. 64 No. 4 P. 314–318
This paper addresses the high-priority goal of reducing the energy cost of heat-treating foam concrete slabs. We show that this problem is best solved using microwaves as a heat source. We discuss the main advantages of microwave curing over traditional techniques for curing foam concrete slabs, and develop a design for a microwave foam concrete ...
Added: October 16, 2021
Mamontov A. V., Nefedov V. N., Nazarov I. et al., Измерительная техника 2021 № 4 С. 44–48
The actual problem of accelerating and reducing the energy costs of the foam concrete slabs heat treatment technological process is considered. It is shown that to solve this problem, it is advisable to use the microwave radiation energy as a heat source. The main advantages of the microwave method of foam concrete slabs heat treatment ...
Added: May 15, 2021
Kasatkin A., Presnyakov S., Kravchenko N. et al., , in: SYNCHROINFO 2019 Systems of Signal Synchronization, Generating and Processing in Telecommunications, IEEE Conference # 47541.: IEEE, 2019. P. 1–5.
The subject of consideration of this work is the development of the design, algorithm and program for calculating the dispersion characteristics of the coaxial-radial line (CRL). The selected design of the CRL allows to optimize the coupling impedance and the dispersion of the SWS. ...
Added: October 24, 2019
Чекушкин А. М., Юсупов Р. А., Zavyalov V. et al., Журнал радиоэлектроники 2017 № 1 С. 1–8
In this paper we present a new type of cryogenic filter. This filter based on Fabry-Perot interferometer. We use quartz substrate covered by gold grid with low transmission coefficient. Thickness of quartz is 240 um and thickness of gold is 300 nm. The modeling of this filter was done in CST Studio. Filter was tested ...
Added: November 10, 2018
Nefedov V. N., Banov D. K., Bushuev V. D., , in: 2018 International Conference on Actual Problems of Electron Devices Engineering (APEDE).: Саратов: IEEE, 2018. P. 381–386.
The main parameters of beam-type microwave installation with frequency of the electromagnetic field oscillations 2450 MHz, the microwave output power of 4,8 kW for the heat treatment of a carbon fiber parabolic antenna, with heat-resistant epoxy binder, of the aperture diameter 1200 mm, thickness 5 mm are presented. The main results of the temperature distribution ...
Added: October 31, 2018
Nefedov V. N., Махмудов С. А., , in: 2018 International Conference on Actual Problems of Electron Devices Engineering (APEDE).: Саратов: IEEE, 2018. P. 376–380.
A model and method for calculating the temperature distribution of a wide range of materials in a microwave beam-type unit taking into account the reflective walls of the chamber is supposed. The experimental and modeling characteristics of the temperature distribution over the thickness of a homogeneous dielectric material at different distances from the walls of ...
Added: October 30, 2018
Nefedov V. N., Afanas'ev V. V., Ryabikina I. G., , in: 2018 International Conference on Actual Problems of Electron Devices Engineering (APEDE).: Саратов: IEEE, 2018. P. 371–375.
The results of the microwave radiation influence of the electromagnetic field oscillation frequency of 2450 MHz on the process of curing thermosetting epoxy resins, which are used as a binder in the production of polymer composite materials based on basalt, glass and carbon fibers, are presented. It is shown that the density of the cured ...
Added: October 30, 2018
Mozgovoi Y. D., Khritkin S. A., Nikitina E. M., , in: 2018 International Conference on Actual Problems of Electron Devices Engineering (APEDE).: Саратов: IEEE, 2018. P. 113–119.
In the framework of the theory of coupled waves and the method of equivalent circuits, a dispersion equation for resonant slow-wave systems with an electron beam is obtained. For an electrodynamic system in the form of a folded waveguide with given geometric parameters and calculated electrodynamic characteristics, an equivalent circuit is constructed, and its parameters ...
Added: October 16, 2018
Kravchenko N., Mukhin S., Presnyakov S., Journal of Communications Technology and Electronics 2017 Vol. 62 No. 7 P. 800–808
Models of rectangular and axially symmetric resonator slow-wave structures, which are built using transmission matrix for determining the characteristics of the slow-wave structures in different operation modes, are investigated. Elements of the transmission matrix are determined from the results of 3D simulation with the use of the HFSS software. In the analysis of the dispersion ...
Added: October 24, 2017
Kasatkin A., Presnyakov S., Kravchenko N. et al., T-Comm: Телекоммуникации и транспорт 2017 Т. 11 № 1 С. 31–36
In this paper the calculation of the dispersion characteristics of the slow-wave structures suitable for use in the terahertz range devices is conducted. The slow-wave structuress of the "winding waveguide"-, "serpentine"- and "counter-pins"-type can be considered as such. Analysis of the dispersion characteristics was carried out using waveguide-resonator model, which is built for slow-wave structures ...
Added: June 28, 2017
Kravchenko N., Presnyakov S., Kasatkin A. et al., , in: Proceedings of the 2017 IEEE Conference of Russian Young Researchers in Electrical and Electronic Engineering (ElConRus).: St. Petersburg: Saint Petersburg Electrotechnical University “LETI”, 2017. P. 135–137.
In this paper, the dispersion characteristics of slow-wave structures suitable for use in devices in the terahertz range are calculated. Slow-wave structures of “winding waveguide” and “counter pins” types can be considered as suitable systems. Analysis of dispersion characteristics of slow-wave structure was carried out by a waveguide-resonator model, which is built for the slow-wave ...
Added: March 1, 2017
Presnyakov S., Kasatkin A., Kravchenko N. et al., , in: 2016 IEEE Conference on Quality Management, Transport and Information Security, Information Technologies (IT&MQ&IS). Proceedings.: М.: Фонд «Качество», 2016. P. 71–75.
In modeling of resonator slow-wave structures, equivalent systems method was used and collisionless plasma was used as the transit channel filler. Comparison of the results obtained demonstrates the accuracy of the developed model. The dispersion characteristics analysis was conducted. ...
Added: December 13, 2016
Kasatkin A., Kravchenko N., Mukhin S. et al., , in: 2016 International Conference on Actual Problems of Electron Devices Engineering (APEDE).: Саратов: IEEE, 2016. P. 63–70.
Equivalent systems method was implemented for designing the resonator slow-wave structures in plasma-beam devices, and non-impact plasma was used for the filling of the transit channel. The collation of the calculation results demonstrates the adequacy of the developed model in comparison with the real devices and structures. The analysis of the slow-wave structure dispersion characteristics ...
Added: September 30, 2016
Azov G. A., Efremova M. V., Solntsev V. A. et al., Journal of Communications Technology and Electronics 2016 Vol. 61 No. 8 P. 915–919
The results of numerical simulation of electrodynamic characteristics of a slow-wave structure shaped as a folded waveguide and an electron–optical system of a three-millimeter-band pulse travelling wave tube with an output pulsed power of up to 50 W are presented. The matching devices, the interaction space, and the electron–optical system are calculated, which allows determination ...
Added: June 29, 2016