Influence of a material rheological characteristics on the dome thickness during free bulging test

I. Zakhariev; S. A. Aksenov

?

Influence of a material rheological characteristics on the dome thickness during free bulging test

Journal of Chemical Technology and Metallurgy. 2017. Vol. 52. No. 5. P. 1002–1007.

Free bulging process is an experimental technique which can be used to characterize a sheet material in conditions of biaxial tension during hot forming. Analytical and semi-analytical models of this process are usually based on the hypothesis offering certain relations between the geometrical characteristics of a bulge during forming. The paper presents an original relation between a specimen thickness at the dome pole and the dome height which is used at the semi-analytical method for simulation of free bulging process. In order to obtain this relation, the finite-element computer simulation results were generalized. The influence of the material constants on the geometrical parameters of the bulge was studied. It was shown that the sheet thickness corresponding to a specific dome height is dictated by the strain rate sensitivity index of the material. The equation describing the influence of the strain rate sensitivity index on the dome apex thickness is presented.

Research target: Effective Natural Resource Management Mechanics and Mechanical Engineering Construction

Priority areas: engineering science

Language: English

Full text

Text on another site

Keywords: математическое моделирование Mechanical properties Mathematical simulation сверхпластичность finite element method метод конечных элементов (МКЭ)superplasticity газовая формовка Free bulging test механические свойства материалов свободная формовка gas forming

Publication based on the results of:

Investigation of strain rate sensitive materials forming (2016)

АНАЛИЗ ИССЛЕДОВАНИЙ, ПОСВЯЩЁННЫХ ИСПОЛЬЗОВАНИЮ СЕНСОРИКИ ДВИЖИТЕЛЕЙ ДЛЯ ПОВЫШЕНИЯ ЭФФЕКТИВНОСТИ ТРАНСПОРТНО-ТЕХНОЛОГИЧЕСКИХ СРЕДСТВ

Viacheslav K., Русский инженер 2024 № 3 С. 34–37

Analysis of various methods referred to the increasing energy efficiency and movement safety through the use of control systems which take into account the force factors of interaction of the wheel propeller with the supporting surface. During the analysis of methods dedicated to energy efficiency rise and were used techniques of logical and statistical analysis. There are various ...

Added: May 19, 2026

Perovskite nanoparticles Cs4PbBr6 and CsPbBr3: synthesis, analysis and peculiar optical properties

Гущина В. А., / Series chemrxiv-2023-vpzhz-v2 "ChemRxiv". 2023.

All-inorganic perovskite CsPbBr3 and Cs4PbBr6 nanoparticles are being intensively studied due to their unique properties and wide range of applications; however, however, the nature of their optical properties is not yet fully understood due to the difficulty of synthesis of singlephase nanoparticles. In this article we describe the features of the synthesis of single-phase particles ...

Added: May 14, 2026

Isotactic copolymerization of but-1-ene with polar vinyl monomers: the effect of ω-alken-1-ol comonomer content on phase behavior, melt rheology, mechanical and adhesive properties of functionalized poly(but-1-ene)s

Садртдинова Г. И., Vinogradov A., Nifantiev I. et al., Polymer 2025 Vol. 339 Article 129133

Isotactic copolymerization of but-1-ene with bio-based undec-10-en-1-ol (M1), dec-9-en-1-ol (M2) and their silyl esters (M3–M5), catalyzed by C1-symmetric ansa-heterocene [Me2Si(η5-2,4,7-trimethelinden-1-yl)(η5-2,5-dimethyl-7H-cyclopenta[1,2-b:4,3-b']dithiophen-7-yl)]ZrCl2 (Zr1), activated by iBu3Al and MMAO-12, was explored for the first time. At [AlMMAO]/[Zr1] = 40 and [Monomer]/[Zr1] = 5,000, iBu2Al-protected ω-alken-1-ols have demonstrated highest activities and up to 16.7 mol% degrees of the comonomer incorporation with a formation of ...

Added: May 12, 2026

Разработка комплексной математической модели для виртуальных тепловых испытаний электронной аппаратуры

Vinokurov Y., Kofanov Y. N., Sotnikova S., В кн.: Инновационные, информационные и коммуникационные технологии: сборник трудов XXII Международной научно-практической конференции. Москва, 2025.: Ассоциация выпускников и сотрудников ВВИА им. проф. Жуковского, 2025. С. 129–134.

В статье представлены результаты разработки и валидации комплексной математической модели в виде ненаправленного графа для конкретного применения, а именно для проведения виртуальных тепловых испытаний электронной аппаратуры. Предложена структура модели, включающая четыре подмодели: тепловых процессов внутри аппаратуры, взаимодействия с испытательным оборудованием, внешнего температурного воздействия, взаимодействия с оснасткой и с измерительной системой. Описаны методы получения исходных данных ...

Added: May 1, 2026

Persistent illegal sturgeon fishing in the Caspian Sea

Ermolin I., Suvorkov P., Conservation Biology 2026 No. e70300 P. 1–10

Illegal, unreported, and unregulated (IUU) fishing driven by artisanal small-scale fisheries is a critical threat to global biodiversity and is exemplified by the commercial extinction of Caspian sturgeons (Acipenser and Huso). A key knowledge gap persists regarding the scale and behavioral dynamics of these operations.We tested the hypothesis that persistent high-volume sturgeon poaching is sustained ...

Added: April 25, 2026

LSTM-модель потребления тепловой энергии в многоэтажном жилом здании

Ершов И. А., Системная инженерия и инфокоммуникации 2025 № 4 С. 11–14

The heat consumption of residential buildings is a stochastic series. It is necessary for the design of thermal energy regulators the creation of a neural network model. In the paper, the model is carried out based on Long Short-Term Memory (LSTM). The high accuracy of reproducing the series was achieved by training the model on ...

Added: April 22, 2026

Algorithmic overlaps as thermodynamic variables: from local to cluster Monte Carlo dynamics in critical phenomena

Pilé I., Deng Y., Shchur L., / Series arXiv "math". 2026. No. 2604.10254.

We investigate the spatial overlap of successive spin configurations in Markov chain Monte Carlo simulations using the local Metropolis algorithm and the Svendsen-Wang and Wolff cluster algorithms. We examine the dynamics of these algorithms for two models in different universality classes: the Ising model and the Potts model with three components. The overlap of two ...

Added: April 20, 2026

The partitioning of mobile fractions of chemical elements in the mineral loamy soils during natural regeneration after plowing in Western Russia

Enchilik P. R., G.V.Klink, Semenkov I. N., Science of the Total Environment 2025 Vol. 998 Article 180219

Natural regeneration of forest soils affected by agricultural practices is a common phenomenon in many regions worldwide, particularly in boreal ecosystems. Affecting soil quality, the partitioning of extractable fractions of heavy metals and metalloids (HMMs) is not studied during natural regeneration. The following stages of natural regeneration after plowing have been identified in the Smolenskoye ...

Added: April 19, 2026

Прогнозирование долговечности элементов шасси беспилотных транспортно-технологических средств с учётом влияния жесткостных параметров несущей системы

Левенков Я. Ю., Чичекин И. В., Вдовин Д. С. et al., Труды НАМИ 2025 № 1 (300) С. 17–30

Введение (постановка задачи и актуальность). В настоящее время широкое распространение получило использование автономных мобильных беспилотных транспортно-технологических средств (БТТС) при выполнении работ в зонах с вредными и опасными факторами. Также данные машины могут быть использованы для выполнения поисково-спасательных работ, доставки грузов в труднодоступные районы и иных подобных задач. Поэтому к таким БТТС предъявляются повышенные требования к ...

Added: April 16, 2026

The role of resource scarcity in shaping the green energy mix in the largest rare-earth metal trading nations

Barut A., Proskuryakova L. N., Yakutkina V. et al., Renewable Energy 2026 Vol. 267 Article 125736

The global demand for rare earth metals (REM) has exceeded the global supply, exacerbating the deficit of these resources for wind turbines, solar panels, electric vehicles, and nuclear reactors. The largest REM exporting and importing countries have the power to influence energy transition in their own countries and around the world. This study analyzes the ...

Added: April 8, 2026

Experimental Geophysical Detection of Spatial and Temporal Variability of Urban Soil Properties

S. S. Bricheva, P. M. Shilov, Yurchenko A. P. et al., Eurasian Soil Science 2025 Vol. 58 Article 74

The high variability of properties in urban soils and the abundance of anthropogenic inclusions that interfere with the propagation of electromagnetic fields are the reasons why they are seldom studied by geophysics. At the same time, geophysics is an efficient and fast way to diagnose soil structure and dynamics without affecting the functioning of the ...

Added: March 26, 2026

Усилия в связях якорной системы раскрепления плавучего объекта при воздействии на него волн цунами

Беляев Н. Д., Лебедев В. В., Нуднер И. С. et al., Гидротехническое строительство 2025 № 11 С. 50–58

This paper presents a description of the experimental methodology and the results of experiments on the physical modeling of the interaction of long tsunami-type waves with an anchored structure. The forces in the mooring system connections under wave action are assessed. The obtained results are analyzed. Conclusions are drawn regarding the nature of the force ...

Added: March 25, 2026

Study of Tool Actuation Frecuency on the Basis of Bimetallic Microactuator

Kartsev A., Physics of Metals and Metallography 2025 Vol. 125 No. 14 P. 1935–1939

The problem of the maximum oscillation frequency of composite bimetallic microactuators excited by thermal pulses has been theoretically investigated. Both traditional bimetallic composites made of metals and alloys with different coefficients of thermal expansion and composites in which one of the layers is made of a mechanically pre-stressed shape memory alloy (SMA) and the other ...

Added: March 16, 2026

Идентификация модели материала по данным испытаний на растяжение плоских образцов с учётом неоднородности деформации

Mikolaenko V., Конюшенко М. Н., Стулков Л. Д., Механическое оборудование металлургических заводов 2025 № 2(25) С. 23–30

Uniaxial tensile testing of flat specimens under superplastic conditions is widely used to determine the deformation behavior of materials. However, the standard interpretation of the results relies on the hypothesis of an ideal uniaxial stress state and often fails to account for the influence of specimen geometry and material flow from the gripping zones to ...

Added: March 5, 2026

Simulation of Low-Pressure Inductively Coupled Plasma with Displacement Potential and Gas Flow

A. Yu. Shemakhin, Plasma Physics Reports 2024 Vol. 50 No. 1 P. 89–100

The dependence of the parameters of low-pressure inductively coupled argon plasma (13.3–113 Pa) and field frequency of 13.56 MHz at the coil on the potential applied to the electrode and on gas flow rate up to 4000 sccm is numerically studied. The model is developed in the COMSOL Multiphysics environment and verified with experimental data, as ...

Added: February 25, 2026

Моделирование оценки потенциала изменения тарифов на авиаперевозки на основе составляющих себестоимости

Урюпин И. В., Vlasenko A., Мир транспорта 2024 Т. 22 № 4 (113) С. 94–103

The price of transportation (rate) is one of the key factors in the development of the air transportation system (ATS) of any country, in particular of the Russian Federation. In turn, the formation of the rate directly depends on the cost price of transportation and its components. Forecasting and modelling the cost prices considering the ...

Added: February 24, 2026

Оценка прямых эксплуатационных расходов для перспективных воздушных судов с альтернативными типами силовых установок

Урюпин И. В., Vlasenko A., Экономика и математические методы 2024 Т. 60 № 2 С. 92–104

At present, in an unstable geopolitical situation, one of the most important tasks for the Russian Federation is the creation of advanced domestic aircraft that will not be inferior to its foreign counterparts. The cost of operating is the main criterion in the design of a new aircraft to ensure competitiveness in air transport systems. ...

Added: February 24, 2026

Оценка цены перспективного воздушного судна на основе его летно-технических характеристик

Урюпин И. В., Vlasenko A., Sukharev A., Экономика и математические методы 2025 Т. 61 № 4 С. 73–85

At present development of advanced civil aircraft is one of the key priorities in Russia. To become commercially successful advanced civil aircraft should provide competitive lifecycle costs. Accordingly, it requires balancing operational expenses and consumer-acceptable pricing during an aircraft design phase. However, price evaluation of a prospective aircraft with the analog method or the income ...

Added: February 24, 2026

Цивилизационные коды экономического роста: сравнительная модель и прогноз ВВП

Akaev A., Давыдова О. И., Korotayev A., Философия и общество 2025 № 4(117) С. 5–46

This article presents a comprehensive macroeconomic analysis of countries grouped into civilizational clusters based on a cultural-historical approach. The object of the study is the macroeconomic dynamics of states in the context of civilizational differences, and the subject is the model-based assessment and forecast of GDP growth rates for the period up to 2050. The ...

Added: February 24, 2026

Accelerated Testing of the Stability of the Properties of Surgical Suture Materials Based on Biodegradable and Nonbiodegradable Polymers

Zhavoronok E. S., Lenkova K. A., Matrenina A. V. et al., Protection of Metals and Physical Chemistry of Surfaces 2025 Vol. 61 No. 5 P. 1231–1238

This study investigated two groups of surgical suture materials—nonabsorbable (polyethylene terephthalate, polyamide, and silk) and absorbable (glycolic/lactic acid copolymer)—before and after accelerated aging. The analysis employed tensile strength testing, Fourier-transform infrared (FTIR) spectroscopy, and differential scanning calorimetry (DSC). Following domestic and international standards for polymer aging, the samples were subjected to the following initial accelerated aging ...

Added: February 19, 2026

Thioglycidyl Methacrylate-Based Reactive Polyalkylene Sulfide Resin as an Alternative Substrate for the Reaction with Elemental Sulfur: Peculiarities of Synthesis, Thermodynamic and Mechanical Properties of Sulfur-Rich Plastics with High Adhesive Tensile Strength and Chemical Resistance

Rumyantsev M. S., Kalagaev I. Y., I. N. Senchikhin, Macromolecules 2025 Vol. 58 No. 5 P. 2574–2588

The search for chemical and technological solutions to process cheap and available elemental sulfur to produce valuable multifunctional materials is one of the current challenging tasks. Instead of extensively used low-molecular-weight monomers, we proposed to use the original reactive polyalkylene sulfide resin as an alternative reagent containing pendant methacrylic groups. The use of a reactive ...

Added: February 19, 2026

Программные инструментальные средства для разработки мероприятий по снижению брака серийного производства

Yasnitsky L., Голдобин М. А., Мезенцев А. С., Прикладная математика и вопросы управления 2025 № 2 С. 99–116

Представлен обзор современных методов и основанных на них программных инструментах, применяемых для математического моделирования серийных производственных процессов с целью снижения брака и повышения качества производимых изделий. Перечисляются группы работ, нацеленных на обнаружение и классификацию дефектов, работ, в которых решаются задачи прогнозирования образования дефектов и определения значимости параметров, работ направленных на поиск оптимального сочетания технологических параметров изготовления изделий, ...

Added: February 15, 2026

Оценка цены перспективного воздушного судна на основе его летно-технических характеристик

Урюпин И. В., Власенко А. О., Sukharev A., Экономика и математические методы 2025 Т. 61 № 4 С. 73–85

Added: December 12, 2025

Determining the boundary of dynamical chaos in the generalized Chirikov map via machine learning

Chernyshov D., Satanin A., Shchur L., / Series arXiv "math". 2025.

We investigate the boundary separating regular and chaotic dynamics in the generalized Chirikov map, an extension of the standard map with phase-shifted secondary kicks. Lyapunov maps were computed across the parameter space (K,K(α, τ)) and used to train a convolutional neural network (ResNet18) for binary classification of dynamical regimes. The model reproduces the known critical ...

Added: November 21, 2025