?
Enhancing the mechanical properties of high-entropy alloys through severe plastic deformation: A review
JOURNAL OF ALLOYS AND METALLURGICAL SYSTEMS. 2024. Vol. 5. Article 100054.
Naseri M., Ahmad Ostovari Moghadam, Anandkumar M., Sudarsan S., Bodrov E., Samodurova M., Trofimov E.
High-entropy alloys (HEAs) are one of the breakthroughs in the past decade in alloy development that have the potential to exhibit outstanding physical, mechanical, and chemical properties. This allows HEAs to be highly versatile materials for use in a variety of applications. Through reasonable composition design and post-manufacturing processes, HEAs can show superior properties compared to traditional alloys, which are highly demanded for novel emerging technologies. Severe plastic deformation (SPD) has been known as one of the most popular post-manufacturing processes for enhancing the mechanical properties of HEAs. However, there is still a lack of knowledge about the microstructure, physical, and mechanical properties of HEAs subjected to SPD processes. This review is concerned with the production of nano/ultrafine-grained HEAs using SPD techniques such as severe cold rolling (SCR), high-pressure torsion (HPT), and equal channel angular pressing (ECAP). Also, the characteristics of HEAs with respect to SPD are demonstrated, such as reduced grain growth and phase decomposition. These characteristics increase the possibility of producing nanostructured high-entropy alloys (NsHEAs) with multiple principal elements by SPD processes or by post-annealing and enable extremely high superplasticity at high strain rates. Finally, these findings introduce SPD as not only a processing tool to improve the physical and mechanical properties of HEAs, but also as a synthesis tool to fabricate novel HEAs with superior properties compared to conventional engineering materials, especially for high-tech applications.
Language:
English
Lavrukhina E. A., Krasavin D. P., Krishtopenko S. S. et al., Physical Review B: Condensed Matter and Materials Physics 2026 Vol. 114 No. 22 Article 225414
We study coherent electric manipulation of magnetic field induced localized states at a double kink of a helical edge in a HgTe/CdHgTe quantum well. An in-plane magnetic field opens a gap in the one-dimensional (1D) edge spectrum, while changes in the edge orientation generate localized in-gap states at the kinks. We show that, for suitable ...
Added: October 19, 2026
Lev Pyatko, Sergey Aksenov, Regular and Chaotic Dynamics 2026 Vol. 31 No. 5 P. 794–813
In the circular restricted three-body problem, families of periodic and quasi-periodic orbits exist in the vicinity of the libration points and are of significant interest for practical applications. This work presents a neural network-based algorithm for orbit construction and station-keeping, applicable to both periodic and quasi-periodic orbits near collinear libration points. The method employs a ...
Added: October 19, 2026
Zaikin A., Kalenkov M. S., Physical Review B: Condensed Matter and Materials Physics 2026 Vol. 114 Article 214502
We propose a microscopic scheme that allows to describe ac Josephson effect in superconducting junctions
in terms of dissipative quantum dynamics of subgap Andreev bound states. This approach is particularly useful
for highly transparent junctions at subgap bias voltages in which case a nontrivial combination of Landau-Zener
tunneling between Andreev levels and their instability due to quasiparticle escape ...
Added: October 18, 2026
Zaikin A., Kalenkov M. S., Physical Review Letters 2026 Vol. 137 Article 076004
With the aid of a microscopic theory we derive an effective Hamiltonian that controls quantum dynamics
of Andreev states in superconducting nanojunctions out of equilibrium. Resolving the corresponding
Schrödinger-like equation we obtain the “wave functions” for Andreev levels and evaluate electric current
across the junction in the presence of an external voltage bias.We demonstrate that quantum interference of
Andreev ...
Added: October 18, 2026
Сказочкин А. В., Бондаренко Г.Г., Гайдар А. И. et al., Перспективные материалы 2026 № 11 С. 60–75
Рассмотрены механизмы структурно-фазовой перестройки и физико-химические
процессы при формировании износостойких и коррозионно-пассивных покрытий на
чугуне ВЧ40 комбинированной технологией, сочетающей ультразвуковое пластическое
деформирование и электроискровое легирование (ЭИЛ). Образцы модифицировали
ультразвуковым индентором (УЗИ) в среде микрочастиц SiO2 (5 мкм) под давлением
400 МПа с последующим ЭИЛ графитовым и твердосплавным (ВК8) электродом. Структуру,
состав и микротвердость изучали методами сканирующий электронный микроскопии
совмещенной с энергодисперсионной рентгеновской ...
Added: October 16, 2026
Тукачев Н. В., Akkuratov A., Nikitenko S. et al., Solar Energy 2020 Vol. 198 P. 605–611
One of the major challenges in the field of organic photovoltaics is associated with high-throughput manufacturing of efficient and stable organic solar cells. Practical realization of technologies for production of large-area organic solar cells requires the development of novel materials with a defined combination of properties ensuring sufficient reliability and scalability of the process in ...
Added: October 14, 2026
Тукачев Н. В., Liu X., Wang K. et al., INTERDISCIPLINARY MATERIALS 2026 Vol. 5 No. 1 P. 85–123
Hydrogen halide gases are one of the most wide-spread pollutants of atmosphere, which are generated by various industrial sectors or natural processes, and may dramatically affect human health above certain thresholds of exposure. Hence, it is critically important to develop effective sensing methods for these gases. Herein, we review the recent progress as well as ...
Added: October 14, 2026
Zhukov A., Chen F., Zeng Y. et al., Nanoscale 2026 Vol. 18 No. 36 P. 19223–19253
Colloidal semiconductor nanocrystals have emerged as promising materials for next-generation light-emitting diodes (LEDs) owing to their solution processability, tunable emission wavelengths, narrow emission linewidths, and high photoluminescence quantum yields. Among them, anisotropic nanocrystals, including one-dimensional nanorods (NRs) and two-dimensional nanoplatelets (NPLs), offer additional opportunities for controlling transition dipole moment orientation and light out-coupling efficiency. These ...
Added: October 2, 2026
Ostovari Moghaddam A., Mehrabi-Kalajahi S., Solizoda I. A. et al., Metals and Materials International 2026 P. 1–9
Off-stoichiometric boron-doped chemically complex intermetallic alloys (CCIMAs) have recently emerged as a new avenue for overcoming the low temperature brittleness of ordered superlattices. However, their behavior at high temperatures remains unexplored. In this study, a novel (Ni39.6Co29.3Cr10Al15.8Ta3.3Nb2)98.5B1.5 CCIMA was prepared and its oxidation resistance over a wide temperature range (500 °C–950 °C) was studied. The ...
Added: October 1, 2026
Anna Obraztsova, Nikita Fominykh, Komarov S. et al., Applied Physics Letters 2026 Vol. 129 No. 13 Article 132110
Miniaturization of edge-emitting quantum-dot lasers is hampered by increased mirror losses in ultra-short Fabry–Perot cavities and limited modal gain of quantum dots (QDs). Here, we demonstrate electrically injected InGaAs/GaAs quantum-dot stripe lasers with an 8-lm stripe width and focused-ion-beam (FIB)-etched mirrors defining cavity lengths from 300 to 77 lm. The laser cavities were fabricated using ...
Added: September 30, 2026
Piliugin L., Antropov A., Lobashev E. et al., Journal of Nuclear Materials 2026 Vol. 632 Article 156876
The effects of dislocations on the mobility of gas nanobubbles pinned to them are considered as novel unex- plored mechanisms of accelerated fission gas release and investigated using classical molecular dynamics of helium bubbles in FCC aluminum. Non-equilibrium methods are developed to calculate the mobility of a pinned bubble both along and across the dislocation ...
Added: September 28, 2026
Li Y., Han J., Zaman N. et al., ACS Applied Materials & Interfaces 2026 Vol. 18 No. 39 P. 54241–54251
The development of lead sulfide (PbS) quantum dot (QD) photodetectors for short-wave infrared (SWIR) applications has been fundamentally limited by the thermodynamic instability of large PbS QD facets, which leads to aggregation and epitaxial fusion. In this work, robust thermodynamic stabilization was achieved by introducing methylammonium chloride (MACl) in PbS QD surface passivation, as validated ...
Added: September 26, 2026
Veronica Voitovich, Makhov I., Ivan Melnichenko et al., Optics Letters 2026 Vol. 51 No. 17 P. 4872–4875
The influence of cavity surface passivation with SiO2 coating deposited by the plasma-enhanced chemical vapor deposition technique is investigated for injection microdisk lasers with an InGaAsN/GaAs quantum well active region. The electroluminescence spectra of the microdisk lasers with cavity diameters ranging from 12 to 32 μm with and without sidewall surface passivation were studied for a ...
Added: September 25, 2026
Бабичев А. В., Makhov I., Kryzhanovskaya N. et al., Оптика и спектроскопия 2026 Т. 134 № 3 С. 272–277
Представлены результаты по реализации генерации при повышенных температурах в лазерах с длиной волны генерации 980 nm на основе вертикального микрорезонатора с использованием непоглощающих на длине волны оптической накачки зеркал. Минимальная пороговая мощность накачки составила ~0.8 mW и соответствовала температуре 150 K. Добротность микрорезонатора, определенная на пороге генерации, превысила 13000. Максимальная рабочая температура микролазера составила 195 ...
Added: September 25, 2026
Бабичев А. В., Makhov I., Kryzhanovskaya N. et al., Письма в Журнал технической физики 2026 Т. 52 № 12 С. 40–43
Реализована одночастотная генерация при 300 K в лазерах на основе вертикального микрорезонатора. Для лазеров с полупроводниковым выводным зеркалом пороговая плотность мощности накачки составила 6.5 kW/cm2. Добротность микрорезонатора и длина волны излучения, определенные на пороге генерации, равнялись 8800 и ~ 959.8 nm. Применение конструкции микрорезонатора с гибридным выводным зеркалом позволило повысить добротность микрорезонатора (до 12 360) ...
Added: September 25, 2026
Бабичев А. В., Makhov I., Kryzhanovskaya N. et al., Письма в Журнал технической физики 2026 Т. 52 № 18 С. 30–34
Представлены результаты реализации генерации при комнатной температуре в планарных вертикальных микрорезонаторах на основе зеркал Al0.2Ga0.8As/Al0.9Ga0.1As. При 300 K пороговая плотность мощности и добротность на пороге генерации составили 11.4± 0.7 kW/cm2 и 5070± 160 соответственно. Двукратное превышение порога генерации привело к увеличению добротности микрорезонатора до 19 000. Эффективный латеральный теплоотвод подтвержден малым сдвигом энергии кванта, который составил ...
Added: September 25, 2026
Zhukov A., Wang Q., Zeng Y. et al., Nano Letters 2026 Vol. 26 No. 34 P. 11565–11572
Colloidal semiconductor nanorods (NRs) are promising room-temperature single-photon sources because of their
solution processability, tunable optical properties, and intrinsically linearly polarized emission. However, simultaneously achieving high photoluminescence quantum yield (PLQY), strong polarization, and high-purity single-photon emission remains challenging in conventional binary-shell NRs due to the competing requirements of
exciton confinement and core/shell lattice−strain management. Here, we report CdSe/CdZnS gradient alloy core/shell NRs with tunable ...
Added: September 23, 2026
Боровицкая И. В., Пименов В. Н., Коршунов С. Н. et al., Перспективные материалы 2026 № 10 С. 37–54
Проведено сравнение, обобщение и систематизация механизмов эрозии и разрушения
поверхности малоактивируемых материалов, перспективных для использования в
качестве материалов вакуумной камеры термоядерных реакторов: ванадия, его сплава
V – 10 Ti – 6 Cr – 0,05 Zr – 0,1 Si и вольфрама при последовательном воздействии на
них ионных и тепловых потоков. Тепловые потоки имитировали с помощью мощного
импульсного лазерного излучения (ЛИ), создаваемого ...
Added: September 22, 2026
Богданчиков И. Ю., Бачурин А. Н., Есенин М. А. et al., Достижения науки и техники АПК 2026 Т. 40 № 6 С. 73–80
The studies were conducted with the aim of theoretically and experimentally justification the parameters of a levelling device with adjustable depth to improve the uniformity of the chopper rotor loading and the quality of straw distribution in the MDUS-2.3 unit. The optimal angle at the apex of the isosceles triangular profile of the levelling device of 90° ...
Added: September 17, 2026
Andreev D. V., Kornev S. A., Bondarenko G.G. et al., Inorganic Materials: Applied Research 2026 Vol. 17 No. 5 P. 1226–1230
Comparative studies are carried out to investigate high-field charge degradation effects in the gate
dielectric of metal—insulator—semiconductor (MIS) structures with aluminum and polysilicon gates.
Charging phenomena in MIS structures are explored using high-field electron injection into the dielectric
under conditions of gradually increasing voltage current density, with periodic short-term switching to a measurement
mode at a constant low injection ...
Added: September 15, 2026
Cherkashina N. I., Pavlenko V. I., Bondarenko G.G. et al., Inorganic Materials: Applied Research 2026 Vol. 17 No. 5 P. 1247–1257
The description is given to the synthesis of a flexible polymer composite for radiation protection
based on a rubber matrix and rare-earth metal oxides (Dy2O3 and Gd2O3). The physico-mechanical parameters
are established for the compositions with dysprosium oxide as follows: the density ranging from 1.31 to
2.44 g/cm3, tensile strength is staying between 6.06 and 1.72 MPa. In ...
Added: September 15, 2026
Huang D., Chen Y., Luo X. et al., Chinese Journal of Physics 2026 Vol. 103 P. 1803–1814
Using self-consistent Bogoliubov-de Gennes calculations for kagome flakes framed by armchair
and flat edges, we observe a configuration-dependent spatial inhomogeneity of an 𝑠-wave superconducting
condensate. Specifically, at half-filling, the local pair potential is significantly enhanced
by up to 77.8% at edge centers and up to 148.9% at corners, subsequently boosting their
local critical temperatures by up to 13.5% and ...
Added: September 7, 2026
Filippova A. V., Yurchenko N. Y., Smirnov S. A. et al., Journal of Alloys and Compounds 2026 No. 1074 Article 189162
This study investigates the effects of post-processing heat treatment at 300–500 °C on the microstructure, hardness, and tensile properties of laser powder bed fusion (PBF-LB) processed Al-bronze processed with energy densities (ED) in the range of 125–938 J/mm3. In the as-printed state, sharp needle-like α + β′ laths form at lower ED whereas with increasing ED, the β′ ...
Added: June 12, 2026
Садртдинова Г. И., Vinogradov A., Nifantiev I. et al., Polymer 2025 Vol. 339 Article 129133
Isotactic copolymerization of but-1-ene with bio-based undec-10-en-1-ol (M1), dec-9-en-1-ol (M2) and their silyl esters (M3–M5), catalyzed by C1-symmetric ansa-heterocene [Me2Si(η5-2,4,7-trimethelinden-1-yl)(η5-2,5-dimethyl-7H-cyclopenta[1,2-b:4,3-b']dithiophen-7-yl)]ZrCl2 (Zr1), activated by iBu3Al and MMAO-12, was explored for the first time. At [AlMMAO]/[Zr1] = 40 and [Monomer]/[Zr1] = 5,000, iBu2Al-protected ω-alken-1-ols have demonstrated highest activities and up to 16.7 mol% degrees of the comonomer incorporation with a formation of ...
Added: May 12, 2026