Использование статистических критериев для оценки качества данных (на примере данных по свойствам неорганических веществ)
In the paper a new nonparametric generalized M-test for hypotheses about the order of linear autoregression AR(p) is constructed. We also establish robustness of this test in the model of data contamination by independent additive outliers with intensity O(n−1/2). Robustness is formulated in terms of limiting power equicontinuity. Test statistics are constructed with the help of residual empirical processes. We establish the asymptotic uniform linearity of these processes in the defined contamination model.
A model of the thermo-field electron emission from the metal cathode with a thin insulating surface film at temperatures of 200–400 K is developed. An expression for the film emission efficiency in the gas discharge is obtained. The efficiency is equal to the fraction of electrons emitted into the film from the metal substrate, which enter the discharge volume and increase the effective secondary-electron emission yield of the cathode. It is shown that the thermo-field mechanism of electron emission influences noticeably the ignition voltage of the low-current discharge with such cathode at rather low temperatures exceeding the room temperature by less than 100 K.
Mechanical performances of titanium biomedical implants manufactured by superplastic forming are strongly related to the process parameters: the thickness distribution along the formed sheet has a key role in the evaluation of post-forming characteristics of the prosthesis. In this work, a finite element model able to reliably predict the thickness distribution after the superplastic forming operation was developed and validated in a case study. The material model was built for the investigated titanium alloy (Ti6Al4V-ELI) upon results achieved through free inflation tests in different pressure regimes. Thus, a strain and strain rate dependent material behaviour was implemented in the numerical model. It was found that, especially for relatively low strain rates, the strain rate sensitivity index of the investigated titanium alloy significantly decreases during the deformation process. Results on the case study highlighted that the strain rate has a strong influence on the thickness profile, both on its minimum value and on the position in which such a minimum is found.
The ХХV International scientific – technical conference “Foundry 2018” was held of the 18-20 April 2018 at “Rostov” hotel in the city of Pleven, Bulgaria. Its aim is to provide a meeting place for scholars from different countries to present their scientific achievements and to discuss the problems of casting production.
The structural and spectroscopic features of the EuAl3(BO3)4 individual skeletal microcrystals synthesized by a melt solution method have been studied. Their infrared spectra taken from the as-grown microcrystal surfaces mainly contain the lines of the rhombohedral modification of EuAl3(BO3)4 and additional peaks of its monoclinic modification. TEM and X-ray diffraction studies confirm that these additional peaks in the IR spectra belong to the monoclinic C2/c polytype of the EuAl3(BO3)4 compound. We are the first to demonstrate the presence of coherent monoclinic domains in rhombohedral EuAl3(BO3)4 crystals by TEM. Cathodoluminance spectroscopy shows that the microcrystals generate strong emission lines in the range 580–630 nm, and their intensities are strongly influenced by the crystal orientation.