?
Использование методики для определения реологических характеристик сплава АА5083
С. 23-29.
В данной работе применяется простая методика для определения реологических параметров сверхпластичных материалов на основании экспериментов по свободной формовке. Методика применяется для определения алюминиевого сплава Алюминиевого сплава АА5083 при температуре 450 градусов Цельсия. Полученные свойства были верифицированы с помощью имитационного моделирования, методом конечных элементов. Проведено сравнение результатов имитационного моделирования с данными представленными в литературе.
В книге
Воронеж : ООО Фирма "Элист", 2015
Захарьев И. Ю., Аксенов С. А., Демин Д. О., В кн. : Материалы Всероссийской научной школы-конференции "Механика предельного состояния и смежные вопросы" , посвященной 85-летию профессора Д. Д. Ивлева (Чебоксары, 15–18 сентября 2015 г.): в 2 ч. Ч. 1.: Чебоксары : Чувашский государственный педагогический университет им. И. Я. Яковлева, 2015. С. 192-197.
В данной работе апробируется простая методика для определения реологические параметров сверхпластичных материалов на основании экспериментов по свободной формовке. Используемая методика была применена для магниевого сплава AZ31 при температуре 520 градусов Цельсия. Полученные свойства были верифицированы с помощью имитационного моделирования, методом конечных элементов. Для сплава AZ31 было проведено сравнение результатов имитационного моделирования с данными, представленными в ...
Добавлено: 20 октября 2015 г.
Аксенов С. А., Захарьев И. Ю., Osipov S. и др., Materials Science Forum 2016 Vol. 838-839 P. 552-556
Добавлено: 23 ноября 2015 г.
Аксенов С. А., Sorgente D., CIRP Journal of Manufacturing Science and Technology 2020 No. 31 P. 618-627
As the characterization of superplastic materials requires elevated temperatures and strain rate control, standard bulge testing procedure with optical measuring systems is not feasible for the determination of biaxial stress–strain curves. Standard superplastic bulge forming tests performed at constant pressure can be used for the identification of material constants or formability evaluation, but they are not ...
Добавлено: 27 января 2021 г.
Аксенов С. А., Sorgente D., Defect and Diffusion Forum 2018 Vol. 385 P. 443-448
The work is dedicated to determination of stress-strain behavior of Ti6Al4V alloy deformed in conditions of biaxial tension provided by free bulging testing. The dome height during each test was continuously measured and recorded using a magnetostrictive position transducer. All the tests were performed using stepped pressure regime with jump pressure changing between two values ...
Добавлено: 26 декабря 2019 г.
Aksenov S.A., Chumachenko E.N., Kolesnikov A. V. и др., Journal of Materials Processing Technology 2015 Vol. 217 P. 158-164
This study proposes a method for determination of material characteristics by inverse analysis of free bulging tests results. The blow-forming tests were carried out at the temperature of 415 °C using aluminum alloy (AMg-6) sheets of a 0.92 mm thickness. Each test was performed at constant pressure. For each fixed value of pressure, a series ...
Добавлено: 19 декабря 2014 г.
Superplastic forming has already been proven as a practical solution for manufacturing lightweight components in niche applications such as the aerospace and luxury cars industries. The demand to produce such components will continue with the limited nature of the energy resources available today. Therefore, superplastic materials are expected to stay as potential candidates in such ...
Добавлено: 26 декабря 2019 г.
Новиков Л. С., Makletsov A. A., Sinolits V. V., Advances in Space Research (includes Cospar Information Bulletin) 2016 Vol. 57 No. 2 P. 671-680
Добавлено: 27 января 2017 г.
Kotov A. D., Mikhaylovskaya A. V., Kishchik M. S. и др., Journal of Alloys and Compounds 2016 Vol. 688 P. 336-344
Highlights
•
Superplastic behaviour and the microstructural evolution were investigated.
•
Alloy with Al3(Sc,Zr) particles and alloy containing Al3Zr and Al3Ni particles.
•
Alloy with Ni and Zr exhibits a 1.5–2 times finer grains during deformation.
•
Al3Ni particles provide a larger number of nuclei for recrystallization.
Abstract
The superplastic properties of two high strength aluminium alloys are investigated. The first alloy contains fine, coherent ...
Добавлено: 9 сентября 2016 г.
Kotov A. D., Mikhaylovskaya A. V., Kishchik M. S. и др., Materials and Design 2015
The current research aimed to investigate characteristics of superplasticity of two high strength aluminum alloys, the one that contains fine coherent particles of Al3(Zr,Sc) phase and the other that contains both coherent fine Al3Zr and coarse Al3Ni particles. It has been established that the bimodal distribution of Al3Zr and Al3Ni particles significantly improves superplasticity due ...
Добавлено: 7 декабря 2015 г.
Аксенов С. А., Kolesnikov A., Mikhaylovskaya A., Journal of Materials Processing Technology 2016 Vol. 237 P. 88-95
Добавлено: 7 декабря 2015 г.
Sorgente D., Palumbo G., Piccininni A. и др., CIRP Journal of Manufacturing Science and Technology 2018 No. 20 P. 29-35
Mechanical performances of titanium biomedical implants manufactured by superplastic forming are strongly related to the process parameters: the thickness distribution along the formed sheet has a key role in the evaluation of post-forming characteristics of the prosthesis. In this work, a finite element model able to reliably predict the thickness distribution after the superplastic forming ...
Добавлено: 1 декабря 2017 г.
Garkul A., Стегайлов В. В., Scientific Reports 2022 Vol. 12 No. 1 Article 13325
Добавлено: 8 августа 2022 г.
Захарьев И. Ю., Аксенов С. А., Journal of Chemical Technology and Metallurgy 2017 Vol. 52 No. 5 P. 1002-1007
Добавлено: 11 декабря 2016 г.
Аксенов С. А., Sorgente D., Procedia Engineering 2017 Vol. 207 P. 1892-1897
Добавлено: 20 февраля 2018 г.
Аксенов С. А., Миколаенко В. В., Metals 2020 Vol. 10 No. 10 Article 1353
Добавлено: 13 декабря 2020 г.
Захарьев И. Ю., В кн. : Авиакосмические технологии (АКТ-2015):Тезисы I тура XVI Всероссийской научно-технической конференции и школы молодых ученых, аспирантов и студентов. : Воронеж : ООО Фирма "Элист", 2015. С. 105-107.
Работа посвящена определению свойств сплава ОТ4-1 по данным экспериментов по свободной многокупольной формовки. С помощью метода конечных элементов произведена серия расчетов, процесса свободной газовой формовки куполов для верификации полученных результатов. ...
Добавлено: 20 октября 2015 г.