?
A method of ensuring controllability of electronics based on diagnostic modeling of heterogeneous physical processes
World Applied Sciences Journal. 2013. Vol. 24. P. 196-201.
Uvaysov S. U., Ivanov I.
The paper discusses the basic operations to ensure testability of electronic means (EM). The result of the proposed transactions is the basis of the diagnostic data. To improve the efficiency of the diagnostic modeling of the underlying testability design, the processes of calculation of tolerance limits and creation a list of possible defects are considered. Allocated a distinguishing feature of the proposed method, which consists in taking into account the thermal characteristics for electrical diagnostic modeling. The technique of checking the uniqueness of detection considered defects. And a criterion for evaluation of the achieved level of testability is also proposed
Research target:
Electronics and Electrical Engineering
Priority areas:
engineering science
Language:
English
Keywords: электронные средстважизненный циклlife cycleконтролепригодностьдиагностическое моделированиеcomputer-aided designсистемы автоматизированного проектированияelectronic means, computer-aided design, life cycle, testability, diagnostic modeling, test action, the reject limit of tolerance electronic radio elementTestabilityelectronic meansdiagnostic modelingtest actionthe reject limit of tolerance electronic radio elementтестовое воздействие
Publication based on the results of:
Abrameshin A. E., Ivanov I., Kofanov Y. N. et al., Прикаспийский журнал: управление и высокие технологии 2015 № 2 С. 172-182
The urgency of test generation problem is founded to increase the efficiency of monitoring and diagnosing electronic means. As part of the information system of diagnostic modeling implementation, the algorithm of test forming, that provides analysis of the circuitry in the static mode, as well as in the frequency and time domains, is considered. In ...
Added: December 7, 2015
Ivanov I., Uvaysov S. U., Tikhonov А. N. et al., Тяжелое машиностроение 2015 № 5 С. 31-34
The paper offers approach to the well-founded option of the component parts of the electronic means for organization of effective diagnostics during the final inspection and the stage of exploitation. Peculiarity of the offered method is that it takes into consideration both objectives scheme indexes (sensitivity, reliability, range of tolerances) and subjective decision of designers, ...
Added: October 23, 2014
Kofanov Y. N., Sotnikova S., Tikhonov А. N. et al., Информационные технологии в проектировании и производстве 2014 № 4 С. 50-55
In this paper, we propose a diagnostic model of electronic means (ES), based on the complex electrical, thermal and mechanical modeling for high reliability computer-aided diagnosis. The method developed on the basis of this model allows to detect hidden faults and system failures due to the interconnection of electrical, thermal and mechanical processes occurring in ...
Added: November 14, 2014
Макаров К. А., Tumkovskiy S., Tishkin A., Качество. Инновации. Образование 2013 № 10 С. 29-32
The article deals with the general approach to the construction of a distributed system of circuit simulation as part of information support of the product life cycle. The implementation of these approaches is demonstrated on the example of the creation of one of the elements of the system. This work/article is an output of a ...
Added: October 25, 2013
Aminev D., Журков А. П., Kulygin V. et al., Проектирование и технология электронных средств 2016 № 3 С. 43-49
It is the structure of a distributed radio direction finding system (RDFS), consisting of the local control station (LCS), 12 unmanned remotely located radio terminals (RRT) and communication channels between them. The theoretical basis for determining the reliability and optimization of spare parts is acquisition. The problem of determining the parameters of grade RDFS. Compiled ...
Added: April 15, 2017
Kechiev L., / НИУ ВШЭ. Series SCIENCE, TECHNOLOGY, INNOVATION "SCIENCE, TECHNOLOGY, INNOVATION". 2014.
The problem of standardization in the field of functional safety of electronic means is considered. The problem maintenance, the description of risks and hazards of functioning of electronic equipment is given. Data on a direction of standardization in the field of functional safety are provided. Base standards in the field of functional safety are considered. ...
Added: April 4, 2015
Aminev D., Manohin A., Semenenko A. N. et al., Прикаспийский журнал: управление и высокие технологии 2015 № 1(29) С. 108-117
Authors are proved need of contact control methods application of electronic means elements when carrying out thermal diagnosing in the closed constructive volume. The method of the error calculation brought by the sensor at measurement of element temperature is described. In article topological thermal models of electronic component mounted on the printed circuit board and ...
Added: December 10, 2014
Ivanov I., Koshelev N. A., В кн. : Инновационные информационные технологии. Материалы международной научно-практической конференции. Часть 3// Innovative information technologies: Materials of The International Scientific-Practical Conference. Part 3. Т. 3: Innovative information technologies in industry.: М. : МИЭМ НИУ ВШЭ, 2013. С. 518-526.
This paper presents a system that automates the process of ensuring testability in the design of electronic equipment. Developed and presented algorithms of basic modules. Discussed in detail module for selecting diagnosed elements. ...
Added: March 18, 2014
Ismail-zade M. R., Uvaysov S. U., Tihmenev A. N., Качество. Инновации. Образование 2014 № 12 С. 81-87
It was proposed. The system allows to carry of electronic means research with presence of faults in static, dynamic and frequency modes. It was described model, the structure, the functionality and the modules relationship of the information system. ...
Added: December 10, 2014
Jurkov N. K., Затылкин А. В., Polesskiy S. et al., Надежность и качество сложных систем 2013 № 4 С. 75-79
The functional model of the application of mathematical modeling , reflecting the sequence of solving problems in the design of complex electronic systems . Developed a functional model of information technology to ensure the reliability of complex electronic systems. Showing the basic concept of implementing continuous information support program to ensure the reliability of the ...
Added: March 20, 2014
Santander : IEEE Computer Society Conference Publishing Services (CPS), 2013
The Euromicro Conference on Digital System Design (DSD) addresses all aspects of (embedded, pervasive and high-performance) digital and mixed hardware/software system engineering, down to microarchitectures, digital circuits and VLSI techniques. It is a discussion forum for researchers and engineers from academia and industry working on state-of-the-art investigations, development and applications.
It focuses on advanced circuit and ...
Added: October 15, 2013
Tikhonov А. N., Uvaysov S. U., Ivanov I. et al., Труды Научно-исследовательского института радио 2014 № 4 С. 32-36
The paper substantiates the necessity and development of original mathematical model of zener, which allows to carry out diagnostic modeling of radio-electronic means in wide range of faultiness. Proposed model can be included in composition of base of mathematical models of complete units of modern computer programs of schematic analysis. ...
Added: October 23, 2014
Ismail-zade M. R., Polesskiy S., Uvaysov S. U., Качество. Инновации. Образование 2015 № 10 С. 33-38
Предложен программный комплекс, позволяющий в автоматизированном режиме формировать наборы эффективных тестовых воздействий в статическом режиме работы электронного средства и в частотной обрасти. Отличительной особенностью комплекса является использование в качестве среды программирования - LabView, благодаря которой он может быть внедрен в существующий производственный процесс. ...
Added: September 8, 2017
Uvaysov S. U., Ivanov I., Информационные технологии 2011 № 12 С. 41-45
В работе предложена информационная модель процесса обеспечения контролепригодности радиоэлектронных средств на стадии проектирования и представляет собой комплекс взаимосвязанный модулей для приема, обработки, хранения и передачи данных. В модели заложены все основные свойства и информационные связи объекта при современном автоматизированном проектировании с учетом разнородности протекающих физических процессов. ...
Added: November 12, 2012
Uvaysov S. U., Koshelev N. A., Качество. Инновации. Образование 2011 № 11 С. 84-88
С целью контроля качества и диагностирования бортовых электронных средств в рамках современного подхода к проектированию (CALS-технология) космических аппаратов предложен метод формирования набора тестовых воздействий, основанный на анализе всех основных режимах работы устройства. ...
Added: November 12, 2012
Zhadnov V. V., Лушпа И. Л., Информационные технологии в проектировании и производстве 2014 № 4 С. 17-23
The article considers the questions assessing the reliability of mechanical components used in the electronic equipment in the early stages of design. The calculations of failure rates springs shock absorbers according to various methods. It is shown that the use of models failure rates of mechanical elements, taking into account the peculiarities of their structural ...
Added: November 13, 2014
Zhadnov V. V., Зотов А. Н., Вестник компьютерных и информационных технологий 2020 Т. 17 № 6 С. 31-41
This article discusses problems of importing data from system of CAD (Computer-Aided Design) to dependability prediction software. Characteristics of dependability of electronic modules to a large extent define reliability of electronic equipment which contains them. Dependability of electronic modules is established on the early stages of engineering and is usually calculated by special software. Obviously, ...
Added: May 31, 2020
Uvaysov S. U., Качество. Инновации. Образование 2011 № 1 С. 43-46
В рамках реализации CALS-технологий предлагается новый метод безусловного обеспечения контролепригодности радиоэлектронных средств с заданными глубиной и полнотой диагностирования значимых внутренних параметров комплектующих элементов. ...
Added: November 12, 2012
Лушпа И. Л., Zhadnov V. V., Надежность и качество сложных систем 2014 № 1 С. 50-57
The article considers the questions of reliability evaluation of vibration isolators are used to protect electronic equipment from vibration impacts. The calculations of the failure rate springs by different techniques. It is shown that application techniques, taking into account the influence of features of constructive and technological performance, allows to solve not only problems of ...
Added: June 3, 2014
Zhadnov V. V., Polesskiy S., Tihmenev A. N. et al., Компоненты и технологии 2011 № 6 С. 168-174
В статье рассмотрены вопросы создания и внедрения информационной технологии обеспечения надежности сложных электронных средств (ЭС) военного и специального назначения. Основу технологии составляют процессы расчетной оценки характеристик и показателей надежности составных частей (СЧ) для всех уровней разукрупнения, начиная от электрорадио изделий (ЭРИ) и компонентов компьютерной техники (ККТ), электронных модулей первого уровня (ЭМ1) и заканчивая ЭС в ...
Added: January 25, 2013
Artyukhova M. A., Zhadnov V. V., Polesskiy S., Радіоелектроніка, інформатика, управління 2013 № 2 С. 48-53
The current period of creation of the electronic equipment of a responsible and special purpose is characterized by universal introduction of the Quality Management Systems at the enterprises developers and producers of electronic equipment. Quality Management System and its component – Dependability Management System are aimed at providing the guaranteed level of indicators of quality ...
Added: March 6, 2014
М. : Московский государственный институт электроники и математики, 2013
Содержит материалы, представленные к рассмотрению на научно-технический семинар "Новые информационные технологии в автоматизированных системах".
Представляет интерес для научных сотрудников, преподавателей, аспирантов и студентов, работающих по указанным научным направлениям. ...
Added: April 4, 2013
Красноярск : ИПЦ КГТУ, 2000
Представлены доклады Всероссийской научно-технической конференции молодых ученых и студентов, посвященной 105-й годовщине Дня радио, состоявшейся в г. Красноярске 4-5 мая 2000 г.
Отражены последние разработки в области радиотехники и радиоэлектроники по направлениям: радиотехнические системы; радионавигация; СВЧ технология; антенны и устройства; технология; конструирование и компоненты электронных средств; приборостроение; нейроинформатика в радиоэлектронике; автоматизация проектирования.
Рекомендуется студентам и аспирантам радиотехнических ...
Added: March 16, 2014
Ivanov I., Polesskiy S., Tikhonov А. N. et al., Технологии электромагнитной совместимости 2014 № 4 С. 34-43
Ensuring of a high reliability of digital devices with the strict requirements to the electrical overloads requires using of special electronic component base and design techniques, which corresponds to the final service conditions of the devices. The paper is dedicated to the actual issue of designing of methodology of ensuring of testability of electronic means ...
Added: October 23, 2014