?
Regioselective Synthesis of NO-Donor (4-Nitro-1, 2, 3-triazolyl) furoxans via Eliminative Azide–Olefin Cycloaddition
Molecules. 2023. Vol. 28. No. 19. Article 6969.
A facile and efficient method for the regioselective [3 + 2] cycloaddition of 4-azidofuroxans to 1-dimethylamino-2-nitroethylene under p-TSA catalysis affording (4-nitro-1,2,3-triazolyl)furoxans was developed. This transformation is believed to proceed via eliminative azide–olefin cycloaddition resulting in its complete regioselectivity. The developed protocol has a broad substrate scope and enables a straightforward assembly of the 4-nitro-1,2,3-triazole motif. Moreover, synthesized (4-nitro-1,2,3-triazolyl)furoxans were found to be capable of NO release in a broad range of concentrations, thus providing a novel platform for future drug design and related biomedical applications of heterocyclic NO donors.
Keywords: nitrogen heterocycles
Belousov Y., Кискин М. А., Sidoruk A. et al., Australian Journal of Chemistry 2022 Vol. 75 No. 9 P. 572–580
Four new complexes [Ln(pfaa)3(H2O)2]n (Ln = Eu (1), Tb (2)) and [Ln2Cd2(pfaa)10 (phen)2(EtOH)2]·2MeCN (Ln = Eu (3), Tb (4), phen = 1,10-phenanthroline) based on pentaphorphenylacetic acid (Hpfaa) have been prepared and completely investigated. The structures of compounds 1 and 3 were studied by single crystal X-ray diffraction analysis: the isostructural complexes 1 and 2 represent ...
Added: August 26, 2026
Mazur D., Brandyshev P., Doronin S. V. et al., Electrochimica Acta 2026 Vol. 577 Article 149729
The electric double layer (EDL) at a single-crystal metal surface is controlled not only by the electrolyte composition and the electrode potential, but also by the atomic structure of the surface itself. This makes the Ag(hkl)/NaF interface a stringent test for continuum theories of the EDL. In the third part of our series, we examine ...
Added: August 20, 2026
Budkov Y., Kalikin N., Journal of Chemical Physics 2026 Vol. 165 Article 064506
A self-consistent statistical-mechanical theory of the Hall effect in electrolyte solutions is developed by extending the self-consistent Debye–Hückel–Onsager (SCDHO) framework to crossed electric and magnetic fields. The theory incorporates non-local ionic charge distributions via Slater-type form factors, regularizing the Coulomb interaction at short range, and accounts for dielectric friction through ion-specific coefficients, employing experimental values ...
Added: August 12, 2026
Novikov A., New Journal of Chemistry 2026 Vol. 50 P. 13931–13957
The rational design of coinage metal nanocarriers requires a mechanistic understanding of metal-drug binding and predictive descriptors that translate molecular interactions into design rules. Using DFT (B3LYP-D3BJ/def2-TZVP, SMD water), we systematically investigated the binding of 5-fluorouracil (5-FU) and levodopa (l-DOPA) to neutral and cationic homo- and heteronuclear dimers of Au, Ag, and Cu (Au2, Ag2, ...
Added: August 12, 2026
Voropaeva D., S. Novikova, I. Stenina et al., Solid State Ionics 2026 Vol. 445 Article 117288
Composite gel polymer electrolytes based on a perfluorinated sulfonic acid cation-exchange MF-4SC membrane
containing surface-sulfonated nanoparticles of aluminum oxide, cerium (IV) oxide, and titanium oxide (sAl2O3,
sCeO2, and sTiO2, respectively) were prepared by casting from a dispersion in N,N-dimethylformamide and
plasticized with a 1,3-dioxolane/1,2-dimethoxyethane mixture. The influence of the filler nature on ionic conductivity,
solvent uptake, activation energy, lithium ...
Added: July 30, 2026
Korogod D., Shapeev A., Ivan S. Novikov, Physical Review B: Condensed Matter and Materials Physics 2026 Vol. 114 No. 2 Article 024104
We present two models with explicit long-range electrostatics in the form of Coulomb interactions. Both models include point charges depending on their local atomic environments, and the second model also conserves a total charge of an atomic system. We combine the proposed long-range models with the local moment tensor potential (MTP) and demonstrate that they ...
Added: July 22, 2026
Moshkina E., Molokeev M., Zolotov A. et al., Journal of Alloys and Compounds 2026 Vol. 1077 Article 189412
A wide series of substitutions in a subsystem of small radii cations M = Al, Cr, Fe, Ga, Sc is possible in rare-earth borates ReM3(BO3)4 with the huntite structure. However, the existence of these compounds where M = Mn still raises doubts. The study presents a synthetic approach developed in the framework of the flux method allowing for the required ...
Added: June 29, 2026
Schneider M., Zaripov D., Dokin R. et al., Journal of Chemical Theory and Computation 2026 Vol. 22 No. 9 P. 4405–4414
Density functional theory (DFT) is the workhorse of modern reactions and materials modeling. While the exact functional remains unknown, many approximations to it have been constructed either by hand-crafting functional forms to satisfy exact constraints or by machine learning. In this work, we show how both of these approaches can be fused to build both ...
Added: June 26, 2026
Laurinavichyute V., Levin E. E., Mironkova A. A. et al., Surfaces and Interfaces 2026 Vol. 81 Article 108389
In this work we characterize mixed Mo-W acidic deposition solutions with Mo content ranging from 0 to 100 mol.% by Raman and UV–Vis spectroscopy. The obtained distribution diagram of mixed isopolyanions allows one to explain the observed change in film deposition rate with increase in Mo content. It was found that the initial decrease in ...
Added: June 24, 2026
Filippova A. V., Yurchenko N. Y., Smirnov S. A. et al., Journal of Alloys and Compounds 2026 No. 1074 Article 189162
This study investigates the effects of post-processing heat treatment at 300–500 °C on the microstructure, hardness, and tensile properties of laser powder bed fusion (PBF-LB) processed Al-bronze processed with energy densities (ED) in the range of 125–938 J/mm3. In the as-printed state, sharp needle-like α + β′ laths form at lower ED whereas with increasing ED, the β′ ...
Added: June 12, 2026
Obijiofor O., Novikov A., New Journal of Chemistry 2026 Vol. 50 No. 23 P. 9749–9768
Rational design of gold-based nanocarriers for neurotherapeutics requires atomic-scale understanding of drug-material interactions. Density functional theory calculations were performed to investigate levodopa (L-DOPA) adsorption on small gold clusters (Au2–Au4) with cationic, neutral, and anionic charges, with additional validation on a larger Au10 cluster using multiple low-energy isomers. Binding free energies (ΔGbind), charge transfer, and electronic descriptors ...
Added: June 3, 2026
Das A., Saikia J., Maji N. et al., ChemNanoMat 2026 Vol. 12 No. 5 Article e202500733
Developing efficient photoactive materials from bio-derived resources is vital yet challenging for achieving effective water splitting performance. In this work, nano carbon dots (CDs) of zero-dimensional (0D) were synthesized from papaya peel through a simple and eco-friendly process and subsequently anchored onto the two-dimensional (2D) layered structure of graphitic carbon nitride (g-C3N4, GCN) at various ...
Added: June 2, 2026
Wary R. R., Mahato B., Sharma N. et al., The Journal of Physical Chemistry Letters 2026 Vol. 17 No. 17 P. 5099–5107
Development of heterojunction materials is an efficient approach for enhancing photocatalytic and photoelectrochemical processes. We develop a ZnO/CuO heterojunction via Cu doping into a ZnO matrix. Structural characterization confirmed that Cu was effectively incorporated into ZnO without any structural changes. The improved optical properties and reduced charge carrier recombination of the doped samples were confirmed ...
Added: June 2, 2026
Ostovari Moghaddam A., Mehrabi-Kalajahi S., Hossein Vasigh S. A. et al., The Journal of Physical Chemistry Letters 2026 Vol. 17 No. 13 P. 3978–3985
Water electrolysis is a key technology for sustainable energy conversion and hydrogen generation. Recently, high-entropy oxides (HEOs) have emerged as promising materials because they allow tuning of structural, electronic, and catalytic properties in multifunctional systems. Here, we report the synthesis of a multicomponent La(FeCoCuTiNiMnMgSnZn)O3 perovskite, and its hybridization with reduced graphene oxide (rGO) to form a ...
Added: June 1, 2026
Chowdhury U., Mondal S., Dey S. et al., Journal of the american chemical society 2026 Vol. 148 No. 23 P. 24538–24550
Covalent functionalization offers a versatile platform to engineer carbon nanotube properties for optoelectronics applications. We demonstrate by atomistic quantum dynamics simulation that covalent functionalization can renormalize the CNT band gap, split the degenerate CNT band edge states, and strongly influence charge carrier separation and recombination dynamics. Open-ring CNT functionalization (O-CNT) largely retains the π-conjugation, whereas ...
Added: June 1, 2026
Jiménez-Grávalos F., Alexander S. Novikov, Pendás Á. M., Communications in Computational Chemistry 2026 Vol. 8 No. 2 P. 203–210
Chalcogen bonds (ChBs) are often interpreted as 𝜎-hole driven electrostatic interactions between a chalcogen atom and a Lewis base, yet their covalent character remains under active discussion. Here, we present a real-space, reference-free study of prototypical X2Ch···X– complexes (X = F, Cl; Ch = O, S) using the Interacting Quantum Atoms (IQA) energy decomposition within ...
Added: May 27, 2026
Fedorenko A., Ivanova V., Minyaev M. E. et al., ChemistrySelect 2023 Vol. 8 No. 43 Article e202303122
General method for the annulation of [1,2,5]thiadiazole ring to pyridine and benzene cycle has been developed using sulfur monochloride as a sulfur source. On this basis a number of [1,2,5]thiadiazolo[4,3-b]pyridines and benzo[c]thiadiazoles were synthesized. The most π-deficient [1,2,5]thiadiazolo[4,3-b]pyridines readily react with neutral carbon nucleophiles such as CH-acids, indoles, pyrrole and phloroglucinol to give 1,4-adducts. ...
Added: February 14, 2024
Zhilin E., Ivan V. Ananyev, Pivkina A. et al., Dalton Transactions 2022 Vol. 51 No. 37 P. 14088–14096
Nitrogen-oxygen organic materials constitute an important family of multipurpose high-energy materials. However, the preparation of energetic boosters and oxidizers for various civil and space technologies remains a challenging task and such materials usually require special precautions and fine tunability of their functional properties. To find a balance between energy and safety while retaining the oxidizing ...
Added: October 24, 2022
Fershtat, Leonid L., Teslenko F., Synthesis 2021 Vol. 53 No. 20 P. 3673–3682
Five-membered heterocyclic N-oxides attract special attention due to their significant potential applications in medicinal chemistry and advanced materials science. In this regard, novel methods for their synthesis and functionalization are in constant demand. In this short review, recent state-of-the-art achievements in the chemistry of isoxazoline N-oxides, 1,2,3-triazole 1-oxides and 1,2,5-oxadiazole 2-oxides are summarized. The main ...
Added: September 12, 2022
Чаплыгин D., Gorbunov Y., Leonid L. Fershtat, Asian Journal of Organic Chemistry 2021 Vol. 10 No. 10 P. 2644–2653
A regioselective method for an assembly of pharmacologically relevant fully substituted furoxans and isoxazoles using the ring distortion diversity-oriented approach through the one-pot ring cleavage/nucleophilic addition/oxidation cascade of monosubstituted furoxans was developed. The described synthetic strategy is highly regioselective and provides single furoxan regioisomers upon utilization of N- or S-nucleophiles. Utilization of the cyanide-anion as ...
Added: September 12, 2022
Larin A., Shaferov A., Epishina M. et al., ACS Applied Energy Materials 2020 Vol. 3 No. 8 P. 7764–7771
Several energy-rich bifuroxans incorporating nitro and azido functionalities have been synthesized and thoroughly characterized by IR and multinuclear NMR spectroscopy, elemental analyses, single-crystal X-ray diffraction, and differential scanning calorimetry. N-oxide regiochemistry was employed to design the tunable azido(nitro)bifuroxans with different physicochemical and energetic properties. All synthesized compounds have high enthalpies of formation (449-777 kJ mol(-1)) ...
Added: April 12, 2021
Chaplygin D., Ananyev I., Fershtat L. et al., Synthesis 2020 Vol. 52 No. 18 P. 2667–2678
A novel method for the synthesis of a diverse series of functionally substituted five-membered heterocyclic compounds via atom-economic, regio-, and diastereoselective one-pot reaction cascade was developed. This approach involves a ring opening in 4-arylfuroxans to alpha-oximinoarylacetonitrile oxides followed by [3+2] cycloaddition to various dipolarophiles to afford multisubstituted isoxazoles and isoxazolines. Subsequent azole-azole rearrangement of (oximino)isoxazolines/-isoxazoles, ...
Added: April 12, 2021
Anikin O., Leonov N., Klenov M. et al., European Journal of Organic Chemistry 2019 No. 26 P. 4189–4195
7‐Nitro‐3‐(nitro‐NNO‐azoxy)[1,2,4]triazolo[5,1‐c][1,2,4]‐triazin‐4‐amine (4) is the first high‐melting compound bearing adjacent nitro‐NNO‐azoxy and amino groups. It was synthesized by nitration of 7‐nitro‐3‐(tert‐butyl‐NNO‐azoxy)[1,2,4]triazolo[5,1‐c][1,2,4]triazin‐4‐amine (3) with NO2BF4. Compound 4 is a rather thermally stable (decomposition onset temperature 154 °C), highly energetic (calculated heat of formation 580 kcal·kg–1), and highly dense (1.875 g cm–3) material with a CO‐level oxygen balance. ...
Added: October 15, 2020
Ananyev I., Тесленко Ф. Е., Чураков А. et al., Tetrahedron Letters 2020 Vol. 61 No. 13 P. 151678-1–151678-5
A novel one-pot approach for the synthesis of 1,2,4- and 1,2,5-oxadiazole ring assemblies has been developed. The synthetic strategy involves the condensation of furoxanyl amidoximes with aldehydes and subsequent iodine-mediated oxidation of the intermediate 1,2,4-oxadiazolines. The analogous reaction of 4-aminofuroxanyl-3-carboxamidoxime results not only in formation of the 1,2,4-oxadiazole subunit, but also rearrangement of the furoxan ...
Added: August 11, 2020