?
XXIII International Scientific Conference on Advance in Civil Engineering: CONSTRUCTION "THE FORMATION OF LIVING ENVIRONMENT" 2020 23-26 September 2020, Hanoi, Vietnam
Hà Nội :
IOP Publishing, 2020.
With the ability to publish proceedings from events of any size, IOP Conference Series: Materials Science and Engineering provides a comprehensive solution for materials science and engineering conferences
Chapters
Kodzoev M., Isachenko S., Bobrova E. et al., , in: XXIII International Scientific Conference on Advance in Civil Engineering: CONSTRUCTION "THE FORMATION OF LIVING ENVIRONMENT" 2020 23-26 September 2020, Hanoi, Vietnam.: Hà Nội: IOP Publishing, 2020. Ch. 1.
Abstract. The energy efficiency concept incorporates energy conservation and durability components involved in the operation of buildings and cost considerations pertaining to the manufacturing and installation of materials. Ceramic brickwork offers the highest reliability and durability category, is not combustible and in terms of these parameters has advantages over other insulated facade cladding systems. Improving ...
Added: March 21, 2023
Андреев Д. В., Корнев С. А., Bondarenko G. et al., Перспективные материалы 2026 № 6 С. 5–11
Выполнено сравнительное исследование процессов сильнополевой зарядовой
деградации подзатворного диэлектрика структур металл-диэлектрик-полупроводник (МДП)
с алюминиевым и поликремниевым затвором. Зарядовые явления в МДП-структурах
изучали методом сильнополевой инжекции электронов в диэлектрик в режиме возрастания
плотности стрессового инжекционного тока с кратковременными переключениями
в измерительный режим при постоянной низкой плотности инжекционного тока.
Использование данного метода позволило получить новые данные о процессах зарядовой
деградации подзатворного диэлектрика МДП-структур с ...
Added: May 21, 2026
Viacheslav K., Русский инженер 2024 № 3 С. 34–37
Analysis of various methods referred to the increasing energy efficiency and movement safety through the use of
control systems which take into account the force factors of interaction of the wheel propeller with the supporting surface. During
the analysis of methods dedicated to energy efficiency rise and were used techniques of logical and statistical analysis. There are
various ...
Added: May 19, 2026
Rathish S., Andrey S. Vasenko, Thazhathenair A. et al., The Journal of Physical Chemistry Letters 2026 Vol. 17 No. 18 P. 5386–5394
We demonstrate and rationalize the effect of Au nanoparticles (NPs) on the hierarchical g-C3N4/CeO2 heterojunction. g-C3N4/CeO2 decorated with monodispersed plasmonic Au NPs was synthesized. Detailed analyses showed that CeO2 nanocubes and monodispersed Au NPs were evenly distributed over the 2D g-C3N4 surface, forming a robust interface enriched with abundant active sites. The structure enabled efficient separation of photogenerated charge ...
Added: May 16, 2026
Paul R., Das A., Sharma N. et al., Colloids and Surfaces A: Physicochemical and Engineering Aspects 2026 Vol. 728 Article 138830
Niobium-doped TiO2 (Nb-TiO2), demonstrates dual functionality as an efficient photocatalyst for dye degradation and a promising photoelectrocatalyst for water oxidation. Nb incorporation via a facile hydrothermal method was confirmed by XRD (Rietveld refinement), XPS, TEM, FT-IR, Raman, and BET analyses, indicating successful lattice doping and structural modification. Photocatalytic dye degradation experiments were conducted using a model ...
Added: May 16, 2026
Гущина В. А., / Series chemrxiv-2023-vpzhz-v2 "ChemRxiv". 2023.
All-inorganic perovskite CsPbBr3 and Cs4PbBr6 nanoparticles are being intensively studied due to their unique properties and wide range of applications; however, however, the nature of their optical properties is not yet fully understood due to the difficulty of synthesis of singlephase nanoparticles. In this article we describe the features of the synthesis of single-phase particles ...
Added: May 14, 2026
Гущина В. А., Mendeleev Communications 2025 Vol. 35 No. 2 P. 193–195
All-inorganic perovskite CsPbBr3 and Cs4PbBr6 nanoparticles are intensively studied for their unique optical properties, though synthesizing single-phase nanoparticles has posed challenges. Detailed synthesis method of CsPbBr3 and Cs4PbBr6 single-phase nanoparticles and their chemical and phase analysis are described. Distinctive optical characteristics, such as photoluminescence, optical band gap and the Urbach tail region, are revealed and explained within the current ...
Added: May 14, 2026
Гущина В. А., Physics of Complex System 2026 Vol. 7 No. 1 P. 3–15
Heterostructures based on ZnO nanorods and CsPbBr3 nanocrystals were investigated for their potential as semiconductor SERS substrates. We found that ZnO morphology governs the efficiency of interfacial energy transfer, leading to enhanced photoluminescence under 390 nm excitation and a noticeable reduction of the bandgap in the composites. Raman analysis revealed a pronounced intensity enhancement and ...
Added: May 14, 2026
Гущина В. А., Russian Journal of Inorganic Chemistry 2024 Vol. 69 No. 6 P. 940–948
Currently, ABX3 nanoparticles (NPs) based on lead halides attract the attention due to their unique optical properties and a wide range of applications. The preparation of NPs with lead as a partial or complete replacement is particularly interesting because of the toxicity of this chemical element and most of its compounds. In this study, we propose a ...
Added: May 6, 2026
Yasnitsky L., Голдобин М. А., Мезенцев А. С., Прикладная математика и вопросы управления 2025 № 2 С. 99–116
Представлен обзор современных методов и основанных на них программных
инструментах, применяемых для математического моделирования серийных производственных процессов с целью снижения брака и повышения качества производимых изделий. Перечисляются группы работ, нацеленных на обнаружение и классификацию дефектов, работ, в которых решаются задачи прогнозирования образования дефектов и определения значимости параметров, работ направленных на поиск
оптимального сочетания технологических параметров изготовления изделий, ...
Added: May 5, 2026
Morozov E. V., Demin A. S., Borovitskaya I. V. et al., Inorganic Materials: Applied Research 2026 Vol. 17 No. 3 P. 619–626
This article presents the results of experiments on the impact of powerful pulsed ion-plasma and
electron flows generated in the working chamber of the Plasma Focus PF-5M installation during each highvoltage
discharge on a model aluminum alloy B95. It is shown that the general characteristics of the alloy’s
damage upon exposure to pulsed flows of helium ions (HI) ...
Added: May 4, 2026
Ершов И. А., Системная инженерия и инфокоммуникации 2025 № 4 С. 11–14
The heat consumption of residential buildings is a stochastic series. It is necessary for the design of thermal energy regulators the creation of a neural network model. In the paper, the model is carried out based on Long Short-Term Memory (LSTM). The high accuracy of reproducing the series was achieved by training the model on ...
Added: April 22, 2026
Pavlenko V. I., Bondarenko G.G., Cherkashina N. I. et al., Inorganic Materials: Applied Research 2026 Vol. 17 No. 2 P. 276–282
A composite material based on polyethylene, boron carbide (B4C), and bismuth oxide (Bi2O3) is
synthesized by the method of joint cryogenic milling of all components in liquid nitrogen environment followed
by pressing. The effect of cryogenic milling on the distribution of fillers in a composite is studied and
the prospects of using this method are assessed in comparison ...
Added: April 9, 2026
Черкашина Н. И., Павленко В. И., Bondarenko G. et al., Перспективные материалы 2026 № 4 С. 14–26
В данной работе представлен синтез гибкого полимерного композита для защиты от радиации на основе каучуковой матрицы и оксидов редкоземельных металлов, таких как Dy2O3 и Gd2O3, предназначенного для создания радиационно-защитных экранов и средств индивидуальной защиты. Исследованы его физико-механические характеристики: составы с добавлением оксида диспрозия имеют плотность от 1,31 до 2,44 г/см3, предел прочности при растяжении от ...
Added: April 2, 2026
Беляев Н. Д., Лебедев В. В., Нуднер И. С. et al., Гидротехническое строительство 2025 № 11 С. 50–58
This paper presents a description of the experimental methodology and the results of experiments on the physical modeling of the interaction of long tsunami-type waves with an anchored structure. The forces in the mooring system connections under wave action are assessed. The obtained results are analyzed. Conclusions are drawn regarding the nature of the force ...
Added: March 25, 2026
Курилин С. П., Yasnitsky L., Черные металлы 2025 № 8(1124) С. 81–87
Рассмотрена модернизация электроприводов тихоходных технологических установок черной металлургии: вращающихся печей, конвертеров, обжиговых и агломерационных машин. Целью исследования является повышение КПД и надежности электроприводов установок путем частичной передачи функции редуцирования частоты вращения специальному электродвигателю, а также в ходе реализации модульного принципа построения электродвигателя. Прикладная задача исследования состоит в разработке энергоэффективного модульного электродвигателя для электропривода обжиговой машины ...
Added: February 15, 2026
Kurdin A., Бобылев С. Н., Барабошкина А. В. et al., Вестник Московского университета. Серия 6: Экономика 2025 Т. 60 № 1 С. 40–59
Цели в области устойчивого развития (ЦУР) ООН представляют собой систему ориентиров, охватывающую социальные, экологические и экономические аспекты развития в глобальном масштабе. Их эффективная реализация на уровне отдельных государств требует адаптации с учетом национальных стратегий и приоритетов развития. Исследований, затрагивающих вопросы приоритетности той или иной ЦУР для России с учетом текущих реалий, недостаточно. Данная статья посвящена ...
Added: June 27, 2025
Газиянов А. И., Pshichenko D., Ульянкина И. В. et al., Конкурентоспособность в глобальном мире: экономика, наука, технологии 2024 № 11 С. 102–107
The article analyzes how AI contributes to improving emission monitoring, optimizing resource use, and predicting environmental risks. The study examines the potential of Al to automate and enhance the accuracy of data on companies environmental performance. The use of Al helps reduce carbon footprints, improve energy efficiency, making it a critical tool for achieving sustainable ...
Added: March 10, 2025
Kuzyk M., Ruzhanskaya L., Journal of Applied Economic Research 2024 Т. 23 № 3 С. 642–673
Environmental problems, the results of structural changes in the world economy and technological progress raise the task of finding factors that stimulate the transition from continuous growth of energy consumption to decarbonization and energy transition. The aim of the article is to empirically analyze the factors of companies' energy transition policies in different countries of ...
Added: June 25, 2024
IEEE, 2022.
This collection of scientific papers contains articles written based on reports given at the conference "4th International Conference on Control Systems, Mathematical Modeling, Automation and Energy Efficiency (SUMMA)". This conference took place in Lipetsk (Russia) on November 9-11, 2022.
The articles cover a wide range of topics corresponding to the following topics:
I. Industrial Applied Mathematics and ...
Added: February 15, 2024
Kirill Andreev, Ustinova D., Alexey Frolov, IEEE Wireless Communications Letters 2024 Vol. 13 No. 1 P. 69–73
We consider unsourced random access with MIMO receiver – a crucial communication scenario for future 5G/6G wireless networks. We perform a projection-based decoder analysis and derive energy efficiency achievability bounds when channel state information is unknown at transmitters and the receiver (no-CSI scenario). A comparison to the maximum-likelihood (ML) achievability bounds by Gao et al. ...
Added: January 22, 2024
Fikru M., Kilinc-Ata N., Journal of Cleaner Production 2024 Vol. 435 Article 140468
While previous studies examine the impact of renewable energy generation capacity on mineral imports where minerals are broadly defined, this study examines the role of three decarbonization indicators (energy efficiency, energy's carbon footprint, and renewable generation) in driving import demand for four specific minerals used in multiple decarbonization technologies: copper, aluminum, nickel, and manganese. Our results, based on the cross-sectional ...
Added: January 13, 2024
Dolmatov I. A., В кн.: Аналитический вестник Государственной Думы Федерального Собрания Российской Федерации.: Издание Государственной Думы, 2018. С. 142–145.
Цель экспертно-аналитического исследования состояла в проведении сравнительного анализа лучших мировых практик, в частности, опыта ведущих европейских стран, США, Канады, Японии, и российской практики законодательного регулирования в области энергосбережения и энергетической эффективности, в т. ч. текущего состояния и перспектив развития; а также в формировании обоснованных предложений по совершенствованию законодательства и практические рекомендации по формированию эффективной модели нормативного правового регулирования в сфере энергосбережения и повышения энергетической эффективности ...
Added: November 11, 2023
Kozlov A., Mikhail Shapovalov, Alexey Rolich et al., , in: 2023 XVIII International Symposium Problems of Redundancy in Information and Control Systems (REDUNDANCY).: IEEE, 2023. P. 183–188.
Added: November 4, 2023
Бурков А. А., Информационно-управляющие системы 2023 Vol. 2 P. 39–50
Introduction: With the development of modern communication standards, various scenarios of the Internet of things, including massive machine-type communication, are actively considered. The main requirements for such systems are a stable operation with a potentially infinite number of devices and low energy costs. Therefore, it is an urgent task to study different ways to achieve these ...
Added: September 26, 2023