?
Software Complex "VEGA" for Designing cm- and mm-Wave TWT with Resonator Slow-Wave Structures
P. 1–5.
The concept of building a software system for designing traveling-wave tubes (TWTs) with resonator slow-wave structures (SWSs) and models for its implementation is described. The cm- and mm-wave TWT designs developed on the basis of the VEGA software are presented.
Kravchenko N., Kasatkin A., Presnyakov S. et al., , in: 2021 Systems of signals generating and processing in the field of on board communications.: IEEE, 2021. P. 1–4.
This paper discusses the modeling of the process of interaction in traveling-wave tubes (TWTs) based on 'coaxial-radial line'-type (CRL-type) slow-wave structures (SWSs). One of the most important tasks while designing TWTs is to achieve high output power over wide range of frequencies. The aim of this paper is to try to solve this problem by ...
Added: September 23, 2021
Presnyakov S., Kravchenko N., Kasatkin A. et al., , in: 2020 International Conference on Actual Problems of Electron Devices Engineering (APEDE’ 2020). MATERIALS OF THE INTERNATIONAL SCIENTIFIC AND TECHNICAL CONFERENCE. Saratov. September 24-25, 2020.: IEEE, 2020. P. 210–213.
The subject of this work is the theoretical optimization of the design and dimensions of the coaxial-radial line (CRL) based on the program for calculating the dispersion characteristics of the CRL. The chosen CRL design allows optimizing the coupling resistance and dispersion of the slow-wave structure. ...
Added: November 13, 2020
Kasatkin A., Presnyakov S., Kravchenko N. et al., , in: SYNCHROINFO 2019 Systems of Signal Synchronization, Generating and Processing in Telecommunications, IEEE Conference # 47541.: IEEE, 2019. P. 1–5.
The subject of consideration of this work is the development of the design, algorithm and program for calculating the dispersion characteristics of the coaxial-radial line (CRL). The selected design of the CRL allows to optimize the coupling impedance and the dispersion of the SWS. ...
Added: October 24, 2019
Kravchenko N., Borisov N., Kasatkin A. et al., , in: 2019 Systems of signals generating and processing in the field of on board communications.: IEEE, 2019. P. 1–5.
In this paper, the models of the rectangular and axially-symmetric slow-wave structures (SWSs) are considered. These models are used to calculate the dynamic transient response of SWSs. In order to calculate the traveling-wave tube (TWT) section parameters, the waveguide-resonator model and the regression models are utilized. The section terminal devices are simulated by the characteristic ...
Added: October 24, 2019
Kravchenko N., Presnyakov S., Kasatkin A. et al., , in: Proceedings of 2018 Asia-Pacific Microwave Conference.: The Institute of Electronics, Information and Communication Engineers (IEICE), 2018.
This article considers the possibility of expanding the operating band of “chain of coupled resonators”-type slow-wave structure. A waveguide-resonator model which allowed to determine the conditions of the main passband expansion and the coupling impedance increase is utilized. ...
Added: November 30, 2018
Kravchenko N., Presnyakov S., Kasatkin A. et al., , in: Proceedings of the 18th IEEE International Vacuum Electronics Conference (IVEC-2017).: L.: IEEE, 2017. P. 1–2.
In this paper, dispersion characteristics of "serpentine”-type slow-wave structures, which are promising for the terahertz range use, are calculated. For 3D-modeling, HFSS was used. Program described in work was used in the calculation. Using the obtained characteristics, octopole chain model of the slow-wave structure is constructed. Discrete approach is advisable in solving these problems. Justification ...
Added: June 22, 2017
Kravchenko N., Mukhin S., Presnyakov S., В кн.: Фундаментальные проблемы радиоэлектронного приборостроения: Материалы международной научно-технической конференции INTERMATIC-2015Ч. 4: Приборы и компоненты РЭА.: М.: Редакционно-издательский отдел МИРЭА, 2015. Гл. 45 С. 185–188.
При разработке усилителей сверхвысоких частот (СВЧ) большой и средней мощности, широко используемых в радиоэлектронном приборостроении, применяются цельнометаллические резонаторные замедляющие системы (ЗС), обеспечивающие необходимый теплоотвод. Эти ЗС являются трехмерными, а моделирование приборов, создаваемых на их основе с использованием строгих электродинамических программ, требует больших затрат вычислительных ресурсов. Поэтому разработка простых и точных моделей резонаторных ЗС, используемых при ...
Added: December 10, 2015
Azov G. A., Efremova M. V., Khritkin S. A., , in: Proceedings of the 15th IEEE International Vacuum Electronics Conference (IVEC-2014).: Monterey: Institute of Electrical and Electronics Engineers, 2014. P. 321–322.
Results of numerical modeling of slow-wave structure and the electron-optical system of wide-band TWT with continuous output power above 200 W and a gain of 23 dB, for use in vacuum-solid-state amplifier module X / Ku-band have been given. ...
Added: May 17, 2014
Mozgovoi Y. D., Khritkin S. A., Evdokimov Y. V., , in: Proceedings of the 14th IEEE International Vacuum Electronics Conference (IVEC-2013).: P.: Institute of Electrical and Electronics Engineers, 2013. P. 284–285.
Microwave radiation of two passing or counter electron beams promising for amplification and generation of microwaves in regime of electronic mode as well as for energy extraction using directional radiation. In the twobeam devices on the passing beams amplification determined by the longitudinal beams interaction with different speed. Usage of counter beams allows us to ...
Added: June 1, 2013