?
Методика применения системы АСОНИКА при моделировании тепловых процессов блоков и печатных узлов
Динамика сложных систем. 2014. Т. 8. № 5. С. 3-9.
In article technique of application of the system ASONIKA in modeling of thermal processes of units and printed circuit boards is presented. Also in article an example of calculation of the unit and printed circuit board for thermal effects under steady-state and no steady-state modes in according to the technique described in the system ASONIKA is presented.
Research target:
Electronics and Electrical Engineering
Priority areas:
engineering science
Language:
Russian
Keywords: моделированиеmodelingтепловое сопротивлениеASONIKA-TASONIKAАСОНИКАмодель тепловых процессовпечатный узелстационарный тепловой режимнестационарный тепловой режимthermal resistancesteady-state thermal modeno steady-state thermal modePrinted Circuit Boardmodel of thermal processesASONIKA-TMАСОНИКА-ТМАСОНИКА-Т
Rotkevich A., Semenenko A. N., Динамика сложных систем 2013 Т. 7 № 1 С. 35-42
In article an example of application of the system ASONIKA at the design of radio-electronic means is considered. The formulation of the problem and steps of the solution are presented. ...
Added: November 24, 2015
Semenenko A. N., Керре П. О., Роткевич А. С. et al., Динамика сложных систем 2013 Т. 7 № 1 С. 35-41
In article an example of application of the system ASONIKA at the design of radio-electronic means is considered. The formulation of the problem and steps of the solution are presented. ...
Added: November 19, 2013
Kechiev L., Шатов Д. С., Технологии электромагнитной совместимости 2014 № 3(50) С. 36-44
In article features of designing of the distributed power supply system are considered, modelling of untying condensers as a part of distributed to the power supply system is spent, the approach to construction of the distributed power supply system is described ...
Added: October 1, 2014
Aminev D., Manohin A., Semenenko A. N. et al., Прикаспийский журнал: управление и высокие технологии 2015 № 1(29) С. 108-117
Authors are proved need of contact control methods application of electronic means elements when carrying out thermal diagnosing in the closed constructive volume. The method of the error calculation brought by the sensor at measurement of element temperature is described. In article topological thermal models of electronic component mounted on the printed circuit board and ...
Added: December 10, 2014
K. Petrosyants, E. Orekhov, I. Kharitonov et al., Proceedings of SPIE (США) 2012 Vol. 8700 P. 16.1-16.6
In this paper we performed 2D and 3D device simulations to analyze the impact of technology scaling on the lattice heating in n-channel bulk silicon and silicon-on-insulator MOS transistors with gate lengths from 0.5 to 0.1 um. Maximum lattice temperatures and transistor thermal resistances for different gate lengths and bias voltages were calculated. The increase ...
Added: January 23, 2014
Polesskiy S., Artyukhova M. A., Reliability: Theory & Applications 2012 Vol. 7 No. 4 P. 90-101
The paper describes the calculation method of reliability and conservability products class of chemical current sources (CCS) in the design to the specific conditions in the electronic means. The technical specification for the indicators of CCS reliability are for specific operation modes and their use in the calculation gives a large error. In the U.S. ...
Added: February 7, 2013
Shalumov A. S., Чабриков С. В., Шалумова Н. А., Динамика сложных систем 2012 Т. 6 № 2 С. 103-108
In article possibilities of a subsystem of the analysis and maintenance of thermal characteristics of designs of radio-electronic means ASONIKA on construction of thermal models at which there is a heat exchange by radiation are considered. Subsystem possibilities on construction of thermal models of designs of the radio-electronic means containing radiators of cooling of semi-conductor ...
Added: November 26, 2012
Shalumov A. S., Урюпин И. С., Динамика сложных систем 2012 Т. 6 № 2 С. 92-100
In article techniques of modeling of radio-electronic equipment in subsystems of ASONIKA-M and АSONIKА-М-IGS are considered, and also the method of increase of reliability of bearing constructions of radio-electronic equipment is described. Examples are resulted. ...
Added: November 26, 2012
Постановка задачи и разработка математической модели жидкостного охлаждения для подсистемы АСОНИКА-Т
Semenenko A. N., Динамика сложных систем 2013 Т. 7 № 4 С. 64-70
In this article a problem of the development of the liquid cooling mathematical model in radio-electronic means of any design is justified and assigned. A mathematical model of liquid cooling for introduction to the subsystem ASONIKA-T is represented. ...
Added: November 20, 2013
Мн. : Издательство Военной академии Республики Беларусь, 2013
Added: October 13, 2013
К.О. Петросянц, М.В. Кожухов, Известия высших учебных заведений. Электроника 2015 Т. 20 № 6 С. 648-651
An electro-thermal modeling of modern SiGe and Si bipolar transistor structures using TCAD Sentaurus Synopsys has been carried out. It has been shown that for SiGe heterojunction bipolar transistors, operating at high current density, the internal temperature is higher than for identical Si transistors. As a result a stronger degradation of the device parameters and ...
Added: February 18, 2016
Шалумов М. А., Shalumov A. S., Шалумова Н. А. et al., Автоматизация. Cовременные технологии 2017 Т. 71 № 4 С. 162-166
Рассмотрены вопросы автоматизации моделирования тепловых процессов печатных узлов радиоэлектронных средств с использованием радиаторов в автоматизированной подсистеме анализа конструкций печатных узлов радиоэлектронных средств на тепловые и механические воздействия АСОНИКА-ТМ. ...
Added: October 13, 2017
Shalumov A. S., Tikhomirov M. V., Shalumov M. A., European journal of natural history 2012 No. 5 P. 31-34
An automated system for ensuring reliability and quality of the equipment (ASONIKA) can help realize computer-aided design and an integrated computer simulation of highly reliable radio electronic means (REM) of moving objects in accordance with the requirements of CALS-technologies at the stages of engineering-production-exploitation. ...
Added: October 13, 2013
Shalumov A. S., Ивашко В. М., Малютин Н. В. et al., Мн. : ВА РБ, 2014
В монографии представлены совместные мсследования Научной школы «Автоматизированная система обеспечения надёжности и качества аппаратуры АСОНИКА» (руководитель: профессор Кофанов Ю.Н. Национального исследовательского университета «Высшая школа экономики» Российской Федерации), и ученых Учреждения образования «Военная академия Республики Беларусь». Рассмотрен комплекс вопросов, связанных с созданием автоматизированной системы АСОНИКА, обеспечением виртуализации испытаний и стойкости к воздействию дестабилизирующих факторов при эксплуатации ...
Added: March 18, 2015
Kofanov Y. N., М. : АНО «Академия надёжности», 2023
В монографии представлены результаты научной школы «Автоматизированная система обеспечения надёжности и качества аппаратуры АСОНИКА» д.т.н., профессора Ю.Н. Кофанова в Национальном исследовательском университете «Высшая школа экономики». Рассмотрен комплекс вопросов, связанных с историей появления в российской электронной инженерии автоматизированной системы АСОНИКА, а также С разработкой её математического содержания, на основе которого созданы методы для замены физических испытаний ...
Added: March 24, 2023
Феськов Д. О., Романов О. Ю., Короткий Є. В., Проблеми iформатизацii та управлiння 2013 No. 2 (42) P. 118-123
The review of different approaches to the simulation of the networks-on-chip (NoC) is performed. The simulator of the NoC where the topology is set with the matrix of connections between the routers that manage the traffic by means of the routing tables is developed. The capabilities of the NoC simulator are examined and the results ...
Added: February 18, 2015
Kaperko A., Nedosekin P., Датчики и системы 2020 № 6 С. 45-51
In this work, a study of a coaxial diamond sensor for registration of protons and electrons is carried out. The process of interaction of charged particles in the volume of the sensor is simulated in the energy range: from 25 MeV to 200 MeV for protons and from 300 keV to 5 MeV for electrons. ...
Added: June 22, 2021
Семененко А.Н., Шалумов М. А., Малов А. В. et al., Динамика сложных систем 2012 Т. 6 № 3 С. 106-110
In article tasks in view of creation of a technique of identification of thermal parametres, a method of cooling by means of thermal tubes and working out of a subsystem of modelling of thermal processes in radio-electronic means of any design are proved also. ...
Added: November 19, 2013
Bondarenko G., Fisher M. R., Kristya V. I., Journal of Physics: Conference Series 2012 Vol. 406 No. 012031 P. 1-6
Simulation of electron, ion and metastable excited atom motion and interactions in a low-current discharge between the flat electrodes of a gas- discharge device in argon-mercury mixture is fulfilled. Also influence of gas temperature on both densities and fluxes of particles has been investigated. Distributions of the particle densities along the discharge gap under different ...
Added: January 17, 2013
Andreev D. V., Bondarenko G.G., Andreev V. V. et al., Journal of Physics: Conference Series 2021 Vol. 1740 Article 012034
We have modeled the charge effects in radiation MOS sensors functioning in a wide range of electric fields including high-field injection of electrons into the dielectric film. In order to study the charge effects taking place in MOS sensors, we use an extended model suggested by us previously. The extended model, besides the accumulation of ...
Added: January 26, 2021
Manohin A., Шалумова Н. А., Чабриков С. В. et al., Наукоемкие технологии 2011 Т. 12 № 11 С. 44-53
In the article are esteemed assigning and main capabilities of the subsystem of the analysis and maintenance of thermal values of designs of radio electronic means ASONIKA-T, and also principles of simulation of thermal processes in designs with the help of the subsystem ASONIKA-T. The example of simulation of thermal processes in a standard design is ...
Added: January 31, 2013
Kharitonov I. A., Kofanov Y. N., Тегин М. С., Наноиндустрия 2023 Т. 16 № S9-1(119) С. 189-196
The paper presents a set of developed software tools to provide joint electro-thermal modeling of power electronic circuits on PCBs using Comsol, SPICE, Asonika-TM software tools. Examples of joint electro-thermal modeling of power electronic circuit on printed circuits have also been presented. ...
Added: May 21, 2023
Zvezdina N., Сорокин А. С., Вопросы статистики 2018 № 12 С. 28-39
The statement that demand creates its own supply rings true for the smartphone market as well as for any other sector of the market economy. With computerization level of society growing, Internet-based technology advancing, with the increase in Internet penetration of households, growing population mobility and the development of small and medium-sized enterprises, it has ...
Added: January 10, 2019