?
Synergistic Effect of Poly(ethylenephosphoric Acid) and Cerium in Bone Substitute Composites on Tissue Response and Bone Remodeling
International Journal of Molecular Sciences. 2025. Vol. 26. No. 22. Article 11113.
To reduce the time of postoperative recovery and to prevent post-surgical complications, biocompatible synthetic materials with osteoconductive and osteoinductive properties are used as bone substitutes in large bone defect management. A simplified biomimetic approach to similar materials is based on the use of an inorganic filler, a polymer matrix, and a compatibilizer, mimicking the composition of the natural bone. Based on plate-like micro-sized carbonated hydroxyapatite (pCAp), we prepared compression-molded samples optionally containing an additional polyester component (poly(ε-caprolactone) PCL, poly(L-lactide) PLLA, or poly(L-methylglycolide) PLMG); syntheticblock copolymers comprising fragments of the corresponding polyester and poly(ethylene phosphoric acid) (PEPA) were also prepared and studied asa ‘two-in-one’ polymer matrix/compatibilizer. Bone regeneration experiments involving a three-month rat tibial defect model were conducted with 250–500 μm granules of the composites. Comparative studies of the introduction of the polyester-b-PEPA copolymer into composites revealed a positive effect, which manifests itself in accelerated bone regeneration, which further intensified for pCAp/PEPA-b-PLMG. The latter composite formulation was used to study the results of the introduction of cerium into the filler. One-month experiments with pCAp, CePO4-doped pCAp, and composites of these inorganic fillers with PEPA-b-PLMG were conducted. For the first time, a positive synergistic effect of the presence of cerium and PEPA in the composite, which appeared in substitution of the implant material by two-thirds of newly formed partly matured bone, was observed four weeks after surgery.
Belousov Y., Кискин М. А., Sidoruk A. et al., Australian Journal of Chemistry 2022 Vol. 75 No. 9 P. 572–580
Four new complexes [Ln(pfaa)3(H2O)2]n (Ln = Eu (1), Tb (2)) and [Ln2Cd2(pfaa)10 (phen)2(EtOH)2]·2MeCN (Ln = Eu (3), Tb (4), phen = 1,10-phenanthroline) based on pentaphorphenylacetic acid (Hpfaa) have been prepared and completely investigated. The structures of compounds 1 and 3 were studied by single crystal X-ray diffraction analysis: the isostructural complexes 1 and 2 represent ...
Added: August 26, 2026
Mazur D., Brandyshev P., Doronin S. V. et al., Electrochimica Acta 2026 Vol. 577 Article 149729
The electric double layer (EDL) at a single-crystal metal surface is controlled not only by the electrolyte composition and the electrode potential, but also by the atomic structure of the surface itself. This makes the Ag(hkl)/NaF interface a stringent test for continuum theories of the EDL. In the third part of our series, we examine ...
Added: August 20, 2026
Budkov Y., Kalikin N., Journal of Chemical Physics 2026 Vol. 165 Article 064506
A self-consistent statistical-mechanical theory of the Hall effect in electrolyte solutions is developed by extending the self-consistent Debye–Hückel–Onsager (SCDHO) framework to crossed electric and magnetic fields. The theory incorporates non-local ionic charge distributions via Slater-type form factors, regularizing the Coulomb interaction at short range, and accounts for dielectric friction through ion-specific coefficients, employing experimental values ...
Added: August 12, 2026
Novikov A., New Journal of Chemistry 2026 Vol. 50 P. 13931–13957
The rational design of coinage metal nanocarriers requires a mechanistic understanding of metal-drug binding and predictive descriptors that translate molecular interactions into design rules. Using DFT (B3LYP-D3BJ/def2-TZVP, SMD water), we systematically investigated the binding of 5-fluorouracil (5-FU) and levodopa (l-DOPA) to neutral and cationic homo- and heteronuclear dimers of Au, Ag, and Cu (Au2, Ag2, ...
Added: August 12, 2026
Voropaeva D., S. Novikova, I. Stenina et al., Solid State Ionics 2026 Vol. 445 Article 117288
Composite gel polymer electrolytes based on a perfluorinated sulfonic acid cation-exchange MF-4SC membrane
containing surface-sulfonated nanoparticles of aluminum oxide, cerium (IV) oxide, and titanium oxide (sAl2O3,
sCeO2, and sTiO2, respectively) were prepared by casting from a dispersion in N,N-dimethylformamide and
plasticized with a 1,3-dioxolane/1,2-dimethoxyethane mixture. The influence of the filler nature on ionic conductivity,
solvent uptake, activation energy, lithium ...
Added: July 30, 2026
Korogod D., Shapeev A., Ivan S. Novikov, Physical Review B: Condensed Matter and Materials Physics 2026 Vol. 114 No. 2 Article 024104
We present two models with explicit long-range electrostatics in the form of Coulomb interactions. Both models include point charges depending on their local atomic environments, and the second model also conserves a total charge of an atomic system. We combine the proposed long-range models with the local moment tensor potential (MTP) and demonstrate that they ...
Added: July 22, 2026
Moshkina E., Molokeev M., Zolotov A. et al., Journal of Alloys and Compounds 2026 Vol. 1077 Article 189412
A wide series of substitutions in a subsystem of small radii cations M = Al, Cr, Fe, Ga, Sc is possible in rare-earth borates ReM3(BO3)4 with the huntite structure. However, the existence of these compounds where M = Mn still raises doubts. The study presents a synthetic approach developed in the framework of the flux method allowing for the required ...
Added: June 29, 2026
Schneider M., Zaripov D., Dokin R. et al., Journal of Chemical Theory and Computation 2026 Vol. 22 No. 9 P. 4405–4414
Density functional theory (DFT) is the workhorse of modern reactions and materials modeling. While the exact functional remains unknown, many approximations to it have been constructed either by hand-crafting functional forms to satisfy exact constraints or by machine learning. In this work, we show how both of these approaches can be fused to build both ...
Added: June 26, 2026
Laurinavichyute V., Levin E. E., Mironkova A. A. et al., Surfaces and Interfaces 2026 Vol. 81 Article 108389
In this work we characterize mixed Mo-W acidic deposition solutions with Mo content ranging from 0 to 100 mol.% by Raman and UV–Vis spectroscopy. The obtained distribution diagram of mixed isopolyanions allows one to explain the observed change in film deposition rate with increase in Mo content. It was found that the initial decrease in ...
Added: June 24, 2026
Filippova A. V., Yurchenko N. Y., Smirnov S. A. et al., Journal of Alloys and Compounds 2026 No. 1074 Article 189162
This study investigates the effects of post-processing heat treatment at 300–500 °C on the microstructure, hardness, and tensile properties of laser powder bed fusion (PBF-LB) processed Al-bronze processed with energy densities (ED) in the range of 125–938 J/mm3. In the as-printed state, sharp needle-like α + β′ laths form at lower ED whereas with increasing ED, the β′ ...
Added: June 12, 2026
Obijiofor O., Novikov A., New Journal of Chemistry 2026 Vol. 50 No. 23 P. 9749–9768
Rational design of gold-based nanocarriers for neurotherapeutics requires atomic-scale understanding of drug-material interactions. Density functional theory calculations were performed to investigate levodopa (L-DOPA) adsorption on small gold clusters (Au2–Au4) with cationic, neutral, and anionic charges, with additional validation on a larger Au10 cluster using multiple low-energy isomers. Binding free energies (ΔGbind), charge transfer, and electronic descriptors ...
Added: June 3, 2026
Das A., Saikia J., Maji N. et al., ChemNanoMat 2026 Vol. 12 No. 5 Article e202500733
Developing efficient photoactive materials from bio-derived resources is vital yet challenging for achieving effective water splitting performance. In this work, nano carbon dots (CDs) of zero-dimensional (0D) were synthesized from papaya peel through a simple and eco-friendly process and subsequently anchored onto the two-dimensional (2D) layered structure of graphitic carbon nitride (g-C3N4, GCN) at various ...
Added: June 2, 2026
Wary R. R., Mahato B., Sharma N. et al., The Journal of Physical Chemistry Letters 2026 Vol. 17 No. 17 P. 5099–5107
Development of heterojunction materials is an efficient approach for enhancing photocatalytic and photoelectrochemical processes. We develop a ZnO/CuO heterojunction via Cu doping into a ZnO matrix. Structural characterization confirmed that Cu was effectively incorporated into ZnO without any structural changes. The improved optical properties and reduced charge carrier recombination of the doped samples were confirmed ...
Added: June 2, 2026
Ostovari Moghaddam A., Mehrabi-Kalajahi S., Hossein Vasigh S. A. et al., The Journal of Physical Chemistry Letters 2026 Vol. 17 No. 13 P. 3978–3985
Water electrolysis is a key technology for sustainable energy conversion and hydrogen generation. Recently, high-entropy oxides (HEOs) have emerged as promising materials because they allow tuning of structural, electronic, and catalytic properties in multifunctional systems. Here, we report the synthesis of a multicomponent La(FeCoCuTiNiMnMgSnZn)O3 perovskite, and its hybridization with reduced graphene oxide (rGO) to form a ...
Added: June 1, 2026
Chowdhury U., Mondal S., Dey S. et al., Journal of the american chemical society 2026 Vol. 148 No. 23 P. 24538–24550
Covalent functionalization offers a versatile platform to engineer carbon nanotube properties for optoelectronics applications. We demonstrate by atomistic quantum dynamics simulation that covalent functionalization can renormalize the CNT band gap, split the degenerate CNT band edge states, and strongly influence charge carrier separation and recombination dynamics. Open-ring CNT functionalization (O-CNT) largely retains the π-conjugation, whereas ...
Added: June 1, 2026
Jiménez-Grávalos F., Alexander S. Novikov, Pendás Á. M., Communications in Computational Chemistry 2026 Vol. 8 No. 2 P. 203–210
Chalcogen bonds (ChBs) are often interpreted as 𝜎-hole driven electrostatic interactions between a chalcogen atom and a Lewis base, yet their covalent character remains under active discussion. Here, we present a real-space, reference-free study of prototypical X2Ch···X– complexes (X = F, Cl; Ch = O, S) using the Interacting Quantum Atoms (IQA) energy decomposition within ...
Added: May 27, 2026
Kozlova T., Шейченко Е. Д., Kozlov D. et al., ACS Applied Bio Materials 2026 No. 9 P. 2914–2927
Recently, it has been recognized that crystalline ceric phosphates are promising candidates for use in sunscreen cosmetics, as inorganic UV filters. The present paper provides deeper insights into the UV-shielding properties, biocompability, radical-scavenging properties and redox activity of the crystalline double ammonium ceric phosphate (NH4)2Ce(PO4)2·H2O. A strong correlation was established between conditions of hydrothermal synthesis ...
Added: May 6, 2026
Petrakova N., Demina A., Zobkova Y. et al., Journal of Alloys and Compounds 2025 Vol. 1037 Article 181865
The hydroxyapatite powders with co-doping of Ca2+ with Na+ and Ce3+ were obtained by aqueous precipitation.
Co-doping was considered as a method of charge compensation in the cationic sublattice of the HA structure by
means of the 2Ca2+→Ce3+ + Me+ in order to maintain the stability of phase composition, improve the optical
and microstructural properties of the HA ...
Added: November 5, 2025
Forysenkova Anna A., Slukin P., Trofimchuk E. et al., Inorganic Materials: Applied Research 2023 Vol. 14 No. 2 P. 331–340
Powders of copper-, zinc-, manganese-substituted tricalcium phosphates (TCP) are synthesized; the composition and structure of the obtained compounds are studied. It is shown how copper, zinc, and manganese ions affect the phase composition and microstructure of substituted TCP powders. Composite materials based on a blend of polyvinylpyrrolidone with alginate (PVP:ALG) containing copper-, zinc-, and manganese-substituted ...
Added: August 13, 2025
Forysenkova Anna A., Fadeeva I., Deyneko D. et al., Materials 2023 Vol. 16 No. 12 P. 4478–4492
An alternative approach for the currently used replacement therapy in dentistry is to apply materials that restore tooth tissue. Among them, composites, based on biopolymers with calcium phosphates, and cells can be applied. In the present work, a composite based on polyvinylpyrrolidone (PVP) and alginate (Alg) with carbonate hydroxyapatite (CHA) was prepared and characterized. The ...
Added: August 12, 2025
Grechishnikova A., Слукин П. В., Трофимчук Е. С. et al., Перспективные материалы 2022 № 7 С. 35–48
Powders of copper, zinc, manganese-substituted tricalcium phosphates (TCP) were synthesized, the composition and structure of the obtained compounds were studied. It is shown how copper, zinc and manganese ions affect the phase composition and microstructure of powders substituted with TCP. Composite materials based on a blend of polyvinylpyrrolidone with alginate (PVP:ALG) containing copper, zinc, and ...
Added: August 12, 2025
Kelm E., Makievskaya C., Brezgunova A. et al., ACS Applied Electronic Materials 2025 Vol. 7 No. 11 P. 5115–5125
Thin-film electrodes represent a promising approach for developing safe and stable brain–computer interfaces (BCIs). This study presents a method for fabricating thin-film electrodes that incorporates laser processing of metal films sputtered onto a polyimide base. This method is cheaper and faster and allows for rapid design changes and prototyping compared to traditional approaches, such as ...
Added: June 16, 2025
Shymchenko A., FALALEEV A. P., MESHKOV V. V. et al., IOP Conference Series: Materials Science and Engineering (MSE) 2016 Vol. 153 P. 012011–0
An investigation of real automobile parts produced from dual phase steel during standard periods of life cycle is presented, which considers such processes as stamping, exploitation, automobile accident, and further repair. The development of the phenomenological model of the mechanical properties of such parts was based on the two surface plastic theory of Chaboche. As ...
Added: September 23, 2024
Alexander E. Baranchikov, Kozlova T., Sergey Ya. Istomin et al., ChemistrySelect 2024 Vol. 9 No. 17 Article e202401010
A previously unknown double ceric sodium phosphate hydrate Na1.97Ce1.03(PO4)2 · xH2O containing both ceric and cerous cations was obtained by the hydrothermal treatment of amorphous ceric phosphate mixed with a sodium hydroxide aqueous solution. The presence of Ce3+ in the structure was proved by HERFD-XANES and ESR spectroscopy. Iterative transformation factor analysis of HERFD-XANES data allowed estimating the content of Ce3+ as ...
Added: June 4, 2024