?
Pt-doped AlCoCrNiPt0.1 multi-principal element alloy for high-temperature applications
Materials Letters. 2026. Vol. 403. Article 139506.
Samoilova O., Pratskova S., Plotnikova P., Sudarikov M., Shaburova N., Ostovari Moghaddam A., Trofimov E.
Herein, the positive effect of Pt doping on the high-temperature oxidation of AlCoCrNiPt0.1 multi-principal element alloy (MPEA) is demonstrated. It is shown that platinum is not separated as a secondary phase; rather, it is dissolved in the solid solution phase. The studied alloy exhibited good resistance to high-temperature oxidation during a 100-hour isothermal holding at 1100 °C, demonstrating a specific weight gain of 0.922 mg/cm2.
Zirnik G., Ostovari Moghaddam A., Zhukov S. et al., Journal of Materials Science: Materials in Electronics 2026 Vol. 37 Article 738
In regards to the advances in InGaZnO for flexible transistors applications, herein for the first time we measure the broadband radio-frequency range (10 Hz to 1 MHz) dielectric permittivity ε′ and electrical conductivity σ of InGaZnO4 nanoparticle layers at different temperatures ranging from 10 to 300 K. The InGaZnO4 nanoparticles prepared by metal–nitrate–glycol gel decomposition method exhibited ...
Added: June 6, 2026
Das A., Saikia J., Maji N. et al., ChemNanoMat 2026 Vol. 12 No. 5 Article e202500733
Developing efficient photoactive materials from bio-derived resources is vital yet challenging for achieving effective water splitting performance. In this work, nano carbon dots (CDs) of zero-dimensional (0D) were synthesized from papaya peel through a simple and eco-friendly process and subsequently anchored onto the two-dimensional (2D) layered structure of graphitic carbon nitride (g-C3N4, GCN) at various ...
Added: June 2, 2026
Wary R. R., Mahato B., Sharma N. et al., The Journal of Physical Chemistry Letters 2026 Vol. 17 No. 17 P. 5099–5107
Development of heterojunction materials is an efficient approach for enhancing photocatalytic and photoelectrochemical processes. We develop a ZnO/CuO heterojunction via Cu doping into a ZnO matrix. Structural characterization confirmed that Cu was effectively incorporated into ZnO without any structural changes. The improved optical properties and reduced charge carrier recombination of the doped samples were confirmed ...
Added: June 2, 2026
Duran E. ., Pulgar A., Izquierdo R. et al., Physica Status Solidi (A) Applications and Materials 2026 Vol. 223 No. 7 Article e202500942
Ceramic superconductors exhibit remarkable properties, including zero electrical resistance and potent magnetic behavior, operating at temperatures as high as the boiling points of liquid nitrogen (77 K) and liquid hydrogen (20 K). These characteristics position them as key enablers for sustainable technologies spanning electric propulsion, lossless energy transmission, advanced medical imaging, and quantum computation. This review presents ...
Added: June 1, 2026
Андреев Д. В., Корнев С. А., Bondarenko G. et al., Перспективные материалы 2026 № 6 С. 5–11
Выполнено сравнительное исследование процессов сильнополевой зарядовой
деградации подзатворного диэлектрика структур металл-диэлектрик-полупроводник (МДП)
с алюминиевым и поликремниевым затвором. Зарядовые явления в МДП-структурах
изучали методом сильнополевой инжекции электронов в диэлектрик в режиме возрастания
плотности стрессового инжекционного тока с кратковременными переключениями
в измерительный режим при постоянной низкой плотности инжекционного тока.
Использование данного метода позволило получить новые данные о процессах зарядовой
деградации подзатворного диэлектрика МДП-структур с ...
Added: May 21, 2026
Rathish S., Andrey S. Vasenko, Thazhathenair A. et al., The Journal of Physical Chemistry Letters 2026 Vol. 17 No. 18 P. 5386–5394
We demonstrate and rationalize the effect of Au nanoparticles (NPs) on the hierarchical g-C3N4/CeO2 heterojunction. g-C3N4/CeO2 decorated with monodispersed plasmonic Au NPs was synthesized. Detailed analyses showed that CeO2 nanocubes and monodispersed Au NPs were evenly distributed over the 2D g-C3N4 surface, forming a robust interface enriched with abundant active sites. The structure enabled efficient separation of photogenerated charge ...
Added: May 16, 2026
Paul R., Das A., Sharma N. et al., Colloids and Surfaces A: Physicochemical and Engineering Aspects 2026 Vol. 728 Article 138830
Niobium-doped TiO2 (Nb-TiO2), demonstrates dual functionality as an efficient photocatalyst for dye degradation and a promising photoelectrocatalyst for water oxidation. Nb incorporation via a facile hydrothermal method was confirmed by XRD (Rietveld refinement), XPS, TEM, FT-IR, Raman, and BET analyses, indicating successful lattice doping and structural modification. Photocatalytic dye degradation experiments were conducted using a model ...
Added: May 16, 2026
Гущина В. А., / Series chemrxiv-2023-vpzhz-v2 "ChemRxiv". 2023.
All-inorganic perovskite CsPbBr3 and Cs4PbBr6 nanoparticles are being intensively studied due to their unique properties and wide range of applications; however, however, the nature of their optical properties is not yet fully understood due to the difficulty of synthesis of singlephase nanoparticles. In this article we describe the features of the synthesis of single-phase particles ...
Added: May 14, 2026
Гущина В. А., Mendeleev Communications 2025 Vol. 35 No. 2 P. 193–195
All-inorganic perovskite CsPbBr3 and Cs4PbBr6 nanoparticles are intensively studied for their unique optical properties, though synthesizing single-phase nanoparticles has posed challenges. Detailed synthesis method of CsPbBr3 and Cs4PbBr6 single-phase nanoparticles and their chemical and phase analysis are described. Distinctive optical characteristics, such as photoluminescence, optical band gap and the Urbach tail region, are revealed and explained within the current ...
Added: May 14, 2026
Гущина В. А., Physics of Complex System 2026 Vol. 7 No. 1 P. 3–15
Heterostructures based on ZnO nanorods and CsPbBr3 nanocrystals were investigated for their potential as semiconductor SERS substrates. We found that ZnO morphology governs the efficiency of interfacial energy transfer, leading to enhanced photoluminescence under 390 nm excitation and a noticeable reduction of the bandgap in the composites. Raman analysis revealed a pronounced intensity enhancement and ...
Added: May 14, 2026
Гущина В. А., Russian Journal of Inorganic Chemistry 2024 Vol. 69 No. 6 P. 940–948
Currently, ABX3 nanoparticles (NPs) based on lead halides attract the attention due to their unique optical properties and a wide range of applications. The preparation of NPs with lead as a partial or complete replacement is particularly interesting because of the toxicity of this chemical element and most of its compounds. In this study, we propose a ...
Added: May 6, 2026
Yasnitsky L., Голдобин М. А., Мезенцев А. С., Прикладная математика и вопросы управления 2025 № 2 С. 99–116
Представлен обзор современных методов и основанных на них программных
инструментах, применяемых для математического моделирования серийных производственных процессов с целью снижения брака и повышения качества производимых изделий. Перечисляются группы работ, нацеленных на обнаружение и классификацию дефектов, работ, в которых решаются задачи прогнозирования образования дефектов и определения значимости параметров, работ направленных на поиск
оптимального сочетания технологических параметров изготовления изделий, ...
Added: May 5, 2026
Morozov E. V., Demin A. S., Borovitskaya I. V. et al., Inorganic Materials: Applied Research 2026 Vol. 17 No. 3 P. 619–626
This article presents the results of experiments on the impact of powerful pulsed ion-plasma and
electron flows generated in the working chamber of the Plasma Focus PF-5M installation during each highvoltage
discharge on a model aluminum alloy B95. It is shown that the general characteristics of the alloy’s
damage upon exposure to pulsed flows of helium ions (HI) ...
Added: May 4, 2026
Pavlenko V. I., Bondarenko G.G., Cherkashina N. I. et al., Inorganic Materials: Applied Research 2026 Vol. 17 No. 2 P. 276–282
A composite material based on polyethylene, boron carbide (B4C), and bismuth oxide (Bi2O3) is
synthesized by the method of joint cryogenic milling of all components in liquid nitrogen environment followed
by pressing. The effect of cryogenic milling on the distribution of fillers in a composite is studied and
the prospects of using this method are assessed in comparison ...
Added: April 9, 2026
Черкашина Н. И., Павленко В. И., Bondarenko G. et al., Перспективные материалы 2026 № 4 С. 14–26
В данной работе представлен синтез гибкого полимерного композита для защиты от радиации на основе каучуковой матрицы и оксидов редкоземельных металлов, таких как Dy2O3 и Gd2O3, предназначенного для создания радиационно-защитных экранов и средств индивидуальной защиты. Исследованы его физико-механические характеристики: составы с добавлением оксида диспрозия имеют плотность от 1,31 до 2,44 г/см3, предел прочности при растяжении от ...
Added: April 2, 2026
Chowde Gowda C., Alexey Kartsev, Tiwari N. et al., Journal of Materials Chemistry C 2024 Vol. 12 No. 46 P. 18691–18703
Two-dimensional (2D) chromium telluride Cr2Te3 exhibits strong ferromagnetic ordering with high coercivity at low temperatures and paramagnetic behavior when approaching room temperature. The spin states of monolayer Cr2Te3 show ferromagnetic ordering in the ground state. In situ Raman analysis reveals a reversible structure transformation and hence proves ferromagnetic to paramagnetic transition during low-temperature heating cycles (0–25 °C). The magnetic ...
Added: March 16, 2026
Argunov E., Alexey I. Kartsev, Computational Materials Science 2024 Vol. 244 Article 113192
Magnetothermopower and giant magnetoresistance in spinel-type compound has attracted a lot of attention recently. Ab initio computations of the electronic structure and the Seebeck coefficient of the structure are reported. The mixed nature of magnetism was identified to be caused by the competition between ferromagnetic and anti-ferromagnetic impacts, with the corresponding determined exchanged parameters: meV, meV, meV. Seebeck coefficient and electrical conductivity of the compound in the temperature range of K along with its ...
Added: March 16, 2026
Samoilova O., Pratskova S., Shaburova N. et al., Materials 2025 Vol. 18 No. 15 Article 3701
The microstructure, phase composition, and high-temperature oxidation resistance of Fe-free AlCoCrNiNb0.2 and AlCoCr0.5NiNb0.2 high-entropy alloys (HEAs) were investigated. In the as-cast HEAs, niobium was found to mainly release as a Laves phase in the interdendritic region, and its solubility in the dendrites of the BCC solid solution was about 2 at.%. Both samples exhibited parabolic behavior during ...
Added: August 29, 2025
Samoilova O., Pratskova S., Shaburova N. et al., Journal of Materials Engineering and Performance 2025 P. 1–11
The microstructure, phase composition and corrosion resistance of the as-cast CoCrFeNiMox (x = 0.1, 0.3, 0.5) high-entropy alloys (HEAs) in 1 M NaCl and 0.5 M H2SO4 solutions were studied. It was determined that the as-cast samples have a dendritic microstructure, in which the dendrites are a face-centered cubic solid solution, and an σ-phase intermetallic is precipitated into the interdendritic space. ...
Added: June 10, 2025
Effect of Pt Addition on the Oxidation and Corrosion Resistance of Al0.25CoCrFeNi High-Entropy Alloy
Samoilova O., Pratskova S., Suleymanova I. et al., Metals 2023 Vol. 13 No. 10 Article 1709
The effect of minor platinum alloying on the microstructure, phase composition, oxidation and corrosion resistance of Al0.25CoCrFeNi high-entropy alloy (HEA) has been studied. It was observed that Pt does not segregate as a separate phase, but it is incorporated into the fcc solid solution. High-temperature oxidation of the as-cast Al0.25CoCrFeNi and Al0.25CoCrFeNiPt0.1 high-entropy alloys was ...
Added: February 18, 2025
Samoilova O., Sudarikov M., Suleymanova I. et al., Materials Today Communications 2024 Vol. 38 Article 108414
In this work, the effect of gold alloying on the microstructure, phase composition, and high-temperature oxidation resistance of Al0.25CoCrFeNiCu high-entropy alloy (HEA) was studied. It is shown that gold is partly incorporated in the dendritic face-centered cubic (fcc) phase, and it is mainly precipitated as intermetallic compounds (ICs) in the interdendritic space. Al2Au and AuCu3 ICs could be precipitated depending ...
Added: January 23, 2025
Samoilova O., Suleymanova I., Shaburova N. et al., HIGH TEMPERATURE CORROSION OF MATERIALS 2024 Vol. 101 P. 811–825
The quest for high-entropy alloys (HEAs) with superior resistance against oxidation at elevated temperatures is one of the urgent problems in materials society, since HEAs are candidates for coating machinery parts operating in aggressive conditions (such as turbine blades, turbojet and jet engines, etc.). In this study, the effect of minor platinum alloying on the ...
Added: January 23, 2025
Natalia A. M., Alexandr D. M., Vitali A. G. et al., Materials Chemistry and Physics 2021 Vol. 259 Article 123968
A nanoscale bimetallic alloy catalyst PtFe/C is prepared by pyrolysis of the heterometallic platinum-iron carboxylate complex [PtFe(OAc)4]2O⋅4CH2Cl2 on Vulcan XC-72 carbon black. It is characterized by X-ray powder diffraction analysis, X-ray fluorescence spectroscopy, transmission electron microscopy, and electrochemical methods. Its activity in the oxygen reduction reaction (ORR) is tested in an aqueous H2SO4 electrolyte in model conditions, ...
Added: March 10, 2021
Shapovalov S., Energy 2019 Vol. 172 P. 18–25
The preparation of biodiesel from fatty materials HDO provides a very constructive idea to solve the global clean energy problem. The application of catalytic technology to convert oils into green liquid hydrocarbon fuel has great potential for industrial application. The main problem with the development of green diesel technology is the limited number of available ...
Added: December 2, 2019