?
One-Step Interfacial Integration of Graphene Oxide and Organic Chromophores into Multicomponent Nanohybrids with Photoelectric Properties
Langmuir. 2022. Vol. 38. No. 49. P. 15145–15155.
Zvyagina A., Alexandrov A., Averin A., Senchikhin I., Sokolov M., Ezhov A., Tameev A., Kalinina M.
A one-step protocol for interfacial self-assembly of graphene oxide (GO), glutamine-substituted perylene diimide
(PDI-glu), 10,12-pentacosadiynoic acid (PCDA), and zinc acetate into three- and four-component hybrid nanofilms through hydrogen and coordination bonding was developed. The hybrids deposited onto solid supports were studied after polymerization of PCDA by UV−vis absorption, fluorescence, and Raman spectroscopies, scanning electron microscopy (SEM), and atomic force microscopy (AFM). The results of spectroscopic studies suggest that the hybrids assembled through H-bonds can maintain the light-induced Förster energy transfer from the PDI-glu chromophore
to the conjugated polymer and then to GO leading to fluorescence quenching. In the hybrids assembled through coordination bonding with zinc clusters, the energy transfer proceeds from PDI-glu to the PDA polymer, whereas the transfer from PDA to GO is quenched completely. Another important characteristic of these ultrathin hybrids is their stability with respect to photobleaching of chromophores due to the acceptor properties of GO. The as-assembled hybrid nanofilms were integrated with conventional photovoltaic planar architectures to study their photoelectric properties. The zinc-containing hybrids integrated with a hole transport layer exhibited photovoltaic properties. The cell with the integrated four-component hybrid comprising both PDI-glu and PDA showed a photocurrent/dark current ratio almost an order higher than that of the three-component hybrid assembled with PDA only. The supramolecular method based on the interfacial selfassembly can be extended to a wide variety of organic chromophores and polymerizable surfactants for integrating them into multicomponent functional GO-based nanohybrids with targeted properties for organic electronics.
Zhukov A., Liang Y., Zhang X. et al., ACS Applied Nano Materials 2026 Vol. 9 No. 32 P. 15224–15232
The development of high-light-yield scintillators based on perovskite quantum dots (PQDs) is hindered by their intrinsic instability and aggregation, which severely limits their long-term operational reliability and integration into polymeric matrices. Silica coating has been demonstrated as an effective strategy to enhance the stability of PQDs. However, achieving fast and uniform silica encapsulation on individual ...
Added: August 27, 2026
Zhukov A., Kryzhanovskaya N., Moiseev E. et al., Nature 2026 Vol. 656 P. 80–85
Reaching lasing in electrically pumped microdevices based on solution-processed
semiconductors poses a substantial scientific and technological challenge. Halide
perovskites offer a promising platform for electrical injection1, as their optically
excited single-crystal cavities2–4 and predesigned5,6 or postprocessed microstructures7,8
have exhibited low lasing threshold. Indirect electrical pumping of a dual-cavity
perovskite laser was recently obtained9, using a well-established technological
concept of embedding a ...
Added: August 27, 2026
Belousov Y., Кискин М. А., Sidoruk A. et al., Australian Journal of Chemistry 2022 Vol. 75 No. 9 P. 572–580
Four new complexes [Ln(pfaa)3(H2O)2]n (Ln = Eu (1), Tb (2)) and [Ln2Cd2(pfaa)10 (phen)2(EtOH)2]·2MeCN (Ln = Eu (3), Tb (4), phen = 1,10-phenanthroline) based on pentaphorphenylacetic acid (Hpfaa) have been prepared and completely investigated. The structures of compounds 1 and 3 were studied by single crystal X-ray diffraction analysis: the isostructural complexes 1 and 2 represent ...
Added: August 26, 2026
Mazur D., Brandyshev P., Doronin S. V. et al., Electrochimica Acta 2026 Vol. 577 Article 149729
The electric double layer (EDL) at a single-crystal metal surface is controlled not only by the electrolyte composition and the electrode potential, but also by the atomic structure of the surface itself. This makes the Ag(hkl)/NaF interface a stringent test for continuum theories of the EDL. In the third part of our series, we examine ...
Added: August 20, 2026
Budkov Y., Kalikin N., Journal of Chemical Physics 2026 Vol. 165 Article 064506
A self-consistent statistical-mechanical theory of the Hall effect in electrolyte solutions is developed by extending the self-consistent Debye–Hückel–Onsager (SCDHO) framework to crossed electric and magnetic fields. The theory incorporates non-local ionic charge distributions via Slater-type form factors, regularizing the Coulomb interaction at short range, and accounts for dielectric friction through ion-specific coefficients, employing experimental values ...
Added: August 12, 2026
Novikov A., New Journal of Chemistry 2026 Vol. 50 P. 13931–13957
The rational design of coinage metal nanocarriers requires a mechanistic understanding of metal-drug binding and predictive descriptors that translate molecular interactions into design rules. Using DFT (B3LYP-D3BJ/def2-TZVP, SMD water), we systematically investigated the binding of 5-fluorouracil (5-FU) and levodopa (l-DOPA) to neutral and cationic homo- and heteronuclear dimers of Au, Ag, and Cu (Au2, Ag2, ...
Added: August 12, 2026
Voropaeva D., S. Novikova, I. Stenina et al., Solid State Ionics 2026 Vol. 445 Article 117288
Composite gel polymer electrolytes based on a perfluorinated sulfonic acid cation-exchange MF-4SC membrane
containing surface-sulfonated nanoparticles of aluminum oxide, cerium (IV) oxide, and titanium oxide (sAl2O3,
sCeO2, and sTiO2, respectively) were prepared by casting from a dispersion in N,N-dimethylformamide and
plasticized with a 1,3-dioxolane/1,2-dimethoxyethane mixture. The influence of the filler nature on ionic conductivity,
solvent uptake, activation energy, lithium ...
Added: July 30, 2026
Korogod D., Shapeev A., Ivan S. Novikov, Physical Review B: Condensed Matter and Materials Physics 2026 Vol. 114 No. 2 Article 024104
We present two models with explicit long-range electrostatics in the form of Coulomb interactions. Both models include point charges depending on their local atomic environments, and the second model also conserves a total charge of an atomic system. We combine the proposed long-range models with the local moment tensor potential (MTP) and demonstrate that they ...
Added: July 22, 2026
V.I. Voitovich, I.S. Makhov, Andryushkin V. V. et al., Journal of Luminescence 2026 Vol. 295 Article 121936
We report on a comparative study of the optical and structural properties of short-period superlattices (SPSLs) based on digital ternary InGaAs/InAlAs alloys and their counterparts with quaternary InGaAlAs barriers, both grown on InP substrates and emitting in the 1.3 μm wavelength range. The heterostructures were grown by molecular beam epitaxy and analyzed using photoluminescence spectroscopy ...
Added: July 8, 2026
Babichev A., Bobrov M., Vasil'ev A. et al., Applied Physics Letters 2026 Vol. 128 No. 24 Article 241102
High-quality planar cavities with low-absorption mirrors based on Al0.2Ga0.8As/Al0.9Ga0.1As layers demonstrate continuous wave lasing at a wavelength of 956 nm. At 300 K, the threshold power density and the quality-factor at the threshold are 4.2 kW/cm2 and 6800. Increasing the pump level above two thresholds results in an enlargement in the quality-factor to at least 19 ...
Added: July 8, 2026
Moshkina E., Molokeev M., Zolotov A. et al., Journal of Alloys and Compounds 2026 Vol. 1077 Article 189412
A wide series of substitutions in a subsystem of small radii cations M = Al, Cr, Fe, Ga, Sc is possible in rare-earth borates ReM3(BO3)4 with the huntite structure. However, the existence of these compounds where M = Mn still raises doubts. The study presents a synthetic approach developed in the framework of the flux method allowing for the required ...
Added: June 29, 2026
Schneider M., Zaripov D., Dokin R. et al., Journal of Chemical Theory and Computation 2026 Vol. 22 No. 9 P. 4405–4414
Density functional theory (DFT) is the workhorse of modern reactions and materials modeling. While the exact functional remains unknown, many approximations to it have been constructed either by hand-crafting functional forms to satisfy exact constraints or by machine learning. In this work, we show how both of these approaches can be fused to build both ...
Added: June 26, 2026
Laurinavichyute V., Levin E. E., Mironkova A. A. et al., Surfaces and Interfaces 2026 Vol. 81 Article 108389
In this work we characterize mixed Mo-W acidic deposition solutions with Mo content ranging from 0 to 100 mol.% by Raman and UV–Vis spectroscopy. The obtained distribution diagram of mixed isopolyanions allows one to explain the observed change in film deposition rate with increase in Mo content. It was found that the initial decrease in ...
Added: June 24, 2026
Filippova A. V., Yurchenko N. Y., Smirnov S. A. et al., Journal of Alloys and Compounds 2026 No. 1074 Article 189162
This study investigates the effects of post-processing heat treatment at 300–500 °C on the microstructure, hardness, and tensile properties of laser powder bed fusion (PBF-LB) processed Al-bronze processed with energy densities (ED) in the range of 125–938 J/mm3. In the as-printed state, sharp needle-like α + β′ laths form at lower ED whereas with increasing ED, the β′ ...
Added: June 12, 2026
Obijiofor O., Novikov A., New Journal of Chemistry 2026 Vol. 50 No. 23 P. 9749–9768
Rational design of gold-based nanocarriers for neurotherapeutics requires atomic-scale understanding of drug-material interactions. Density functional theory calculations were performed to investigate levodopa (L-DOPA) adsorption on small gold clusters (Au2–Au4) with cationic, neutral, and anionic charges, with additional validation on a larger Au10 cluster using multiple low-energy isomers. Binding free energies (ΔGbind), charge transfer, and electronic descriptors ...
Added: June 3, 2026
Das A., Saikia J., Maji N. et al., ChemNanoMat 2026 Vol. 12 No. 5 Article e202500733
Developing efficient photoactive materials from bio-derived resources is vital yet challenging for achieving effective water splitting performance. In this work, nano carbon dots (CDs) of zero-dimensional (0D) were synthesized from papaya peel through a simple and eco-friendly process and subsequently anchored onto the two-dimensional (2D) layered structure of graphitic carbon nitride (g-C3N4, GCN) at various ...
Added: June 2, 2026
Chinaud-Chaix C., Marchenko N., Fernique Т. C. et al., New Journal of Chemistry 2023 Vol. 47 No. 15 P. 7014–7025
Two-dimensional (2D) self-assembly (SA) is an efficient strategy to organize building blocks in a simple and efficient way. Actually, different communities of chemists or physicists use 2D SA, with different systems at different scales: molecules, nanoobjects, micron-sized colloidal particles, and even millimetric plastic shapes. Although, the cases of study and the perspectives are different, general ...
Added: March 11, 2026
Sokolov M., Nugmanova A., Shkolin A. et al., Journal of Composites Science 2023 Vol. 7 No. 1 Article 14
A novel ion-mediated self-assembly method was applied for integration of graphene oxide (GO), propanoic- and glutaric-substituted perylenes (glu-PDI and PA-PDI), and Zn (OAc)2 into new hybrid materials with photocatalytic properties. The structuring of chromophores through coordination bonding on the GO surface is controlled by the chemistry of the PDI linkers. Four-substituted glu-PDI forms consolidated microporous particles, ...
Added: January 21, 2025
Kozhunova E. Y., Plutalova A., Elena V. Chernikova, Polymers 2022 Vol. 14 No. 3 Article 555
Reversible addition-fragmentation chain transfer polymerization was successfully applied to the synthesis of the gradient copolymer of acrylic acid and vinyl acetate in the selective solvent. The gradient degree of the copolymer was varied by the monomer feed. The monomer conversion was found to affect the ability of the copolymer to self-assemble in aqueous solutions in ...
Added: October 28, 2022
Kan Y., Cvjetinovic J., Statnik E. et al., Materials Today Communications 2020 Vol. 24 Article 101052
A layered hybrid implant was designed and fabricated for the surgical replacement of worn cartilage to meet the complex requirements of biocompatibility and mechanics. The natural hierarchical structure was purposefully mimicked to improve the implant performance and integration. The hybrid was fabricated using three components: processed collagen gel, hydroxyapatite (HAp) powder and ultra-high molecular weight ...
Added: February 10, 2021
Titova T., Yurova P., Kolganova T. et al., Journal of Analytical Chemistry 2020 Vol. 75 P. 1072–1079
Hybrid materials based on perfluorinated sulfonic acid Nafion-type membranes and poly-3,4-ethylenedioxythiophene (PEDOT) with a gradient distribution of the latter along the film length were synthesized by in situ oxidative polymerization. The initial monomer concentration (0.01 and 0.002 M) and the concentration ratio of the monomer to the oxidant (1/1.25 and 1/2.5) were varied. We studied ...
Added: November 29, 2020
Mozhchil R. N., Ionov A., Applied Physics A: Materials Science and Processing 2018 Vol. 124 P. 365
Hummer’s method was used to prepare graphene oxide (GO) by chemical exfoliation of graphite. Simple precipitation method was used for the preparation of hybrid nanocomposites MgO–rGO and Fe2O3–rGO. A 0.3 Molar of corresponding metal nitrate solution and GO solution are used for the preparation process. XRD, FT-IR, and XPS were used to characterize the prepared ...
Added: January 28, 2020
Миняев М., Нифантьев И., Тавторкин А. et al., Acta Crystallographica. Section C, Structural chemistry 2017 Vol. 73 P. 820–827
The crystal structures of rare-earth diaryl- or dialkylphosphate derivatives are poorly explored. Crystals of bis[bis(2,6-diisopropylphenyl) phosphato-kappa O] chloridotetrakis( methanol-kappa O) neodymium methanol disolvate, [Nd(C24H34O4P)Cl( CH4O)(4)]center dot 2CH(3)OH, (1), and of the lutetium, [Lu(C24H34O4P) Cl(CH4O)(4)]center dot-2CH(3)OH, (2), and yttrium, [Y(C24H34O4P) Cl(CH4O)(4)]center dot 2CH(3)OH,(3), analogues have been obtained by reactions between lithium bis(2,6-diisopropylphenyl)-phosphate and LnCl(3)(H2O)(6) (in a ...
Added: October 4, 2019
Safronova E., Parshina A., Kоlganova T. et al., Journal of Electroanalytical Chemistry 2018 Vol. 816 P. 21–29
Hybrid materials based on perfluorosulfonic cation-exchange membranes and silica nanoparticles with surface modified by nitrogen-containing groups have been obtained. The influence of concentration, size and proton acceptor ability of modifying groups on the oxide surface onto the response stability and sensitivity of potentiomentric sensors in aspartic and glutamic acid solutions with pH 4–9 has been investigated. A correlation between sensor cross-sensitivity to cations and anions in ...
Added: January 10, 2019