?
INFLUENCE OF ENVIRONMENT AND MANUFACTURING CONDITIONS ON DURABILITY ESTIMATION
P. 189–192.
Karapuzov M.
The paper describes method of radio engineering systems durability evaluation with the influence of environment and maintenance conditions. Also influence of manufacturing process factors was considered.
In book
M.: Association of graduates and employees of AFEA named after prof. Zhukovsky, 2020.
David D. Tsiteladze, M.: ., 2023.
The textbook outlines modern concepts and methodology of management projects
that need to be mastered when studying the discipline “Project management”. The
textbook materials are based on the recommendations of the International Project
Management Association IPMA (IPMA ICB and IPMA OCB) and the international
standard ISO 21500 and ISO 21502.
Textbook materials help students develop the necessary competencies in
accordance with ...
Added: July 5, 2023
Medvedev A., Bobrova E., Poserenin A. et al., EDP Sciences, 2018.
The factors affecting the durability of insulation systems and products based on mineral fibers are analyzed. It is emphasized that the ratio of acid oxides contained in the charge to the main oxides is the main factor affecting the stability of mineral fibers, as well as the energy intensity of their production. Hypotheses have been ...
Added: February 5, 2021
Zhukov A., Bobrova E., Smirnova T. V., Advanced Materials, Structures and Mechanical Engineering, 2015.
The durability of building structures is one of the most important requirements of modern construction. The durability of the structure depends on the operational durability of all the materials and elements that make up the structure. The durability of the insulation structure is determined by the preservation of the thermal insulation properties of this structure. ...
Added: February 5, 2021
Zhadnov V. V., Kulygin V., Зотов А. Н., Radio Electronics, Computer Science, Control 2019 No. 2 P. 34–43
Constant growth of spacecraft operating life requirements leads to creating equipment which fits these requirements. From this point of view, specifically durability prediction allows to evaluate the potential of creating equipment with a long operating life. On early stages of equipment’s development analytical methods of durability prediction are used. Obviously, the more precise the estimation ...
Added: March 5, 2019
Zhadnov V. V., Kulygin V., Вестник компьютерных и информационных технологий 2018 № 11 С. 28–36
The article discusses the application of statistical modeling for the durability prediction of electronic equipment. Durability indicators are one of the important characteristics of onboard electronic equipment of spacecraft with long terms of active existence.
The purpose of the study is to improve the quality of design work by improving the method of calculating the life ...
Added: November 9, 2018
Zhadnov V. V., Korolev P., Серебрякова Ю. О., T-Comm: Телекоммуникации и транспорт 2018 Т. 12 № 10 С. 15–22
The question of ensuring reliability, especially of durability of mobile communication systems on the stage of planning, is considered in this paper. The purpose of this work is rising quality of projection radio engineering devices (their components) of mobile communication systems. Research of real methods for calculating the indicators of longevity radio engineering devices was ...
Added: October 4, 2018
Novikov L., Voronina E. N., Chernik V. N. et al., Journal of Spacecraft and Rockets 2016 Vol. 53 No. 6 P. 1012–1018
This paper describes results of ground-based simulation of atomic oxygen influence on samples of polymer composites with different fillers. Polyimide and polyamide-imide were used as matrices, and polyorganosiloxanes, inorganic nanoparticles ofTiO2, Al2O3, WC,
multiwalled carbon nanotubes, and detonation nanodiamonds were used as fillers. Data on mass loss of composite samples due to atomic oxygen exposure and ...
Added: January 27, 2017
Ivanov I., Korolev P., Polesskiy S., Системный администратор 2016 № 11(168) С. 80–85
The paper represents creation of macro-models of component parts of computer engineering means by the example of secondary power supply. Macro-model is used as unified form of record by means of analytic form for each component part. This is advantage of the macro-model and difference from the numerical method. In the paper is made accurate ...
Added: November 23, 2016
Artyukhova M. A., Zhadnov V. V., Polesskiy S., , in: 2016 International Siberian Conference on Control and Communications (SIBCON). Proceedings.: M.: HSE, 2016. P. 1–3.
The paper considers the use of alpha-distribution to analyze the influence of radiation on the reliability of command and measuring systems of the spacecraft. The financial support from the Government of the Russian Federation within the framework of the implementation of the 5-100 Programme Roadmap of the National Research University – Higher School of Economics ...
Added: April 8, 2016
Ivanov I., Korolev P., Polesskiy S. et al., , in: 2016 International Siberian Conference on Control and Communications (SIBCON). Proceedings.: M.: HSE, 2016. P. 1–4.
The paper offers methodology for estimation of durability indices of the modern integrated circuit communication network, which has reports about the conducted tests on non-failure operations and conservability, but has no data for the durability. The paper describes two approaches, which apply for generation of basic data and which allow to receive reliable result, typical ...
Added: April 8, 2016
Zhadnov V. V., Kulygin V., Надежность и качество сложных систем 2015 № 3 С. 31–38
Considers creation of software for the calculation of indicators of durability by electronic means to the reference data. When creating software for the calculation of indicators of the longevity of electronic media were the main requirements, the scheme of information exchange with CAD systems and specialized automated systems design studies, to determine the composition of ...
Added: March 6, 2016
Zhadnov V. V., Kulygin V., Лушпа И. Л., T-Comm: Телекоммуникации и транспорт 2015 Т. 9 № 12 С. 61–66
The article examines the creation of program to assess the performance durability of radio-signals processing devices. This type devices are widely used in various communication systems and performance durability of these devices have a significant impact on performance durability communication systems. In the currently accepted methods of assessment of the durability indicators of device can ...
Added: February 29, 2016
Zhadnov V. V., Kulygin V., Лушпа И. Л., T-Comm: Телекоммуникации и транспорт 2016 Т. 10 № 1 С. 39–44
The article examines the creation of program to assess the performance durability of radio-signals processing devices. This type devices are widely used in various communication systems and performance durability of these devices have a significant impact on performance durability communication systems. In the currently accepted methods of assessment of the durability indicators of device can ...
Added: December 10, 2015
Zhadnov V. V., Kulygin V., В кн.: Труды Международного симпозиума «НАДЕЖНОСТЬ И КАЧЕСТВО»: в 2 т.Т. 1.: Пенза: ПГУ, 2015. С. 12–16.
Considers creation of software for the calculation of indicators of durability by electronic means to the reference data. When creating software for the calculation of indicators of the longevity of electronic media were the main requirements, the scheme of information exchange with CAD systems and specialized automated systems design studies, to determine the composition of ...
Added: December 10, 2015
Artyukhova M. A., В кн.: Материалы XII Всероссийской научно-технической конференции «XII Научные чтения по авиации, посвящённые памяти Н.Е. Жуковского»: Сборник докладов.: М.: Издательский дом ВВИА им. проф. Н.Е.Жуковского, 2015.
Assessment of the durability of microwave transistors ...
Added: December 10, 2015
Artyukhova M. A., В кн.: Материалы XII Всероссийской научно-технической конференции «XII Научные чтения по авиации, посвящённые памяти Н.Е. Жуковского»: Сборник докладов.: М.: Издательский дом ВВИА им. проф. Н.Е.Жуковского, 2015.
We consider the evaluation of the durability of microwave transistors ...
Added: December 10, 2015
Zhadnov V. V., , in: 2015 International Siberian Conference on Control and Communications (SIBCON). Proceedings.: Omsk: Omsk State Technical University, 2015.
The report covers the method of the estimated life of electronic devices of control and communication systems at the stage of their development. Mathematical model of life control and communication systems and electronic devices are provided. It is shown that the value of the life of control and communication systems significantly depends on the coefficient ...
Added: December 10, 2015
Artyukhova M. A., В кн.: Тезисы докладов IX международной отраслевой научной конференции “Технологии информационного общества”.: М.: ИД Медиа Паблишер, 2015. С. 76–76.
A study evaluating the durability of the model of microwave power transistors ...
Added: December 10, 2015
Ivanov I., Polesskiy S., Zhadnov V. V. et al., Radio Electronics, Computer Science, Control 2016 No. 2 (2016) P. 7–14
In the paper was solved the task of prediction of fiber cable operating life for automating of design study of reliability of optical-fiber transmission system. The paper offers generation method of mathematical models of complex coefficients, which brings out from the input models failure rates the coefficients, which considers the effects of regimes and conditions ...
Added: December 7, 2015
Kulygin V., Zhadnov V. V., В кн.: Инновации на основе информационных и коммуникационных технологий: Материалы международной научно-практической конференции (2015).: М.: НИУ ВШЭ, 2015. С. 513–515.
The structure of the file storing the design data of the program of calculating durability. Algorithms fetch data from the project files as well as the formation of the structure of the device. Conclusions. ...
Added: December 3, 2015
Zhadnov V. V., Качество. Инновации. Образование 2015 № 11 С. 20–27
The article analyzes the methods of evaluation of calibration intervals of measuring instruments in the design. Describes recommended methods based on the use of indicators of reliability, in the examples it is shown that for electronic measuring instruments, their use may lead to inadequate results. Alternatively, a method based on the use of durability indicators, ...
Added: November 19, 2015