2017 IEEE 37th International Scientific Conference on Electronics and Nanotechnology, ELNANO 2017 - Conference Proceedings
The International Conference founded by the prominent scientist Professor V.P.Sigorsky will be held on April 18-20, 2017 at National Technical University of Ukraine "Kyiv Polytechnic Institute".
The wellknown professionals as well as post-graduate students from Ukraine, Russia, Armenia, Germany, South Korea, Mexico, USA traditionally participate in the conference.
This paper presents a description of the method of automated parametric and structural optimization of systems for ensuring thermal regime of microelectronic devices using modern information technologies.
AMT 2013 is the most comprehensive conference focused on the various aspects of advances in Advanced Measurement and Test. The conference provides a chance for academic and industry professionals to discuss recent progress in the area of Advanced Measurement and Test. The goal of AMT2013 is to bring together the researchers from academia and industry as well as practitioners to share ideas, problems and solutions relating to the multifaceted aspects of Advanced Measurement and Test.
The monograph presents results by professor Dr. A. Shalumov’s Research School of Modeling, Information Technology and Automated Systems (Russia). The program, ASONIKA, developed by the school is reviewed here regarding reliability and quality of devices for simulation of electronics and chips during harmonic and random vibration, single and multiple impacts, linear acceleration and acoustic noise, and steady-state and transient thermal effects. Calculations are done for thermal stress during changes in temperature and power in time. Calculations are done for number of cycles to fatigue failure under mechanical loads as well as under cyclic thermal effects. Simulation results for reliability analysis are taken into account. Models, software interface, and simulation examples are presented.
For engineers and scientists involved in design automation of electronics.
Description of batch piezo actuators, formulas for calculation of absolute and relative deformations in first and second approximation are brought. Example of modification of machine methods for more accurate calculation of anisotropic solids and more specifically of piezo ceramics is shown. Triaxial piezo actuator solution is suggested and it’s work scheme is described. Disadvantages of batch piezo actuators and methods of their removal are shown
Heat pipes application in nanotechnological equipment is considered on examples of probe movement manipulators. Approaches to improvements of manipulators for effective heat extraction from operating area are shown.
The project of laboratory practical works for studying of different electronic devices based on microcircuits of operational amplifiers was developed.
Practical need for application of heat pipes in nanotechnology and more specifically for nanodisplacement devices is shown. Examples of modifications of existent nanotechnological devices for improved heat extraction from operating area are brought. Formulas which describe processes in heat pipes are given, existing and perspective heat pipes design methods are shown.
In the present paper, on the basis of the theory of production principles and production revolutions, we reveal the interrelation between K-waves and major technological breakthroughs in history and make forecasts about features of the sixth Kondratieff wave in the light of the Cybernetic Revolution that, from our point of view, started in the 1950s. We assume that the sixth K-wave in the 2030s and 2040s will merge with the final phase of the Cybernetic Revolution (which we call a phase of self-regulating systems). This period will be characterized by the breakthrough in medical technologies which will be capable to combine many other technologies into a single complex of MBNRIC-technologies (med-bio-nano-robo-info-cognitive technologies). The article offers some forecasts concerning the development of these technologies.
Based on the above-described method of the electronic structures synthesis, an automated subsystem ASONIKA-V has been developed. This subsystem is designed to analyze the mechanical characteristics and synthesis of cabinets structures, racks and blocks electronics, mounted on vibration isolators, under the influence of harmonic vibration, random vibration, shock loads, linear acceleration, under the influence of acoustic noise, as well as complex mechanical influences and decision-making on the basis of the mechanical characteristics in order to ensure structures stability of electronic to mechanical stress.
A model for organizing cargo transportation between two node stations connected by a railway line which contains a certain number of intermediate stations is considered. The movement of cargo is in one direction. Such a situation may occur, for example, if one of the node stations is located in a region which produce raw material for manufacturing industry located in another region, and there is another node station. The organization of freight traﬃc is performed by means of a number of technologies. These technologies determine the rules for taking on cargo at the initial node station, the rules of interaction between neighboring stations, as well as the rule of distribution of cargo to the ﬁnal node stations. The process of cargo transportation is followed by the set rule of control. For such a model, one must determine possible modes of cargo transportation and describe their properties. This model is described by a ﬁnite-dimensional system of diﬀerential equations with nonlocal linear restrictions. The class of the solution satisfying nonlocal linear restrictions is extremely narrow. It results in the need for the “correct” extension of solutions of a system of diﬀerential equations to a class of quasi-solutions having the distinctive feature of gaps in a countable number of points. It was possible numerically using the Runge–Kutta method of the fourth order to build these quasi-solutions and determine their rate of growth. Let us note that in the technical plan the main complexity consisted in obtaining quasi-solutions satisfying the nonlocal linear restrictions. Furthermore, we investigated the dependence of quasi-solutions and, in particular, sizes of gaps (jumps) of solutions on a number of parameters of the model characterizing a rule of control, technologies for transportation of cargo and intensity of giving of cargo on a node station.
Generalized error-locating codes are discussed. An algorithm for calculation of the upper bound of the probability of erroneous decoding for known code parameters and the input error probability is given. Based on this algorithm, an algorithm for selection of the code parameters for a specified design and input and output error probabilities is constructed. The lower bound of the probability of erroneous decoding is given. Examples of the dependence of the probability of erroneous decoding on the input error probability are given and the behavior of the obtained curves is explained.
Event logs collected by modern information and technical systems usually contain enough data for automated process models discovery. A variety of algorithms was developed for process models discovery, conformance checking, log to model alignment, comparison of process models, etc., nevertheless a quick analysis of ad-hoc selected parts of a journal still have not get a full-fledged implementation. This paper describes an ROLAP-based method of multidimensional event logs storage for process mining. The result of the analysis of the journal is visualized as directed graph representing the union of all possible event sequences, ranked by their occurrence probability. Our implementation allows the analyst to discover process models for sublogs defined by ad-hoc selection of criteria and value of occurrence probability
The Handbook of CO₂ in Power Systems' objective is to include the state-of-the-art developments that occurred in power systems taking CO₂ emission into account. The book includes power systems operation modeling with CO₂ emissions considerations, CO₂ market mechanism modeling, CO₂ regulation policy modeling, carbon price forecasting, and carbon capture modeling. For each of the subjects, at least one article authored by a world specialist on the specific domain is included.
Many electronic devices operate in a cyclic mode. This should be considered when forecastingreliability indicators at the design stage.The accuracy of the prediction and the planning for the event to ensure reliability depends on correctness of valuation and accounting greatest possiblenumber of factors. That in turn will affect the overall progress of the design and, in the end,result in the quality and competitiveness of products
Let G be a semisimple algebraic group whose decomposition into the product of simple components does not contain simple groups of type A, and P⊆G be a parabolic subgroup. Extending the results of Popov , we enumerate all triples (G, P, n) such that (a) there exists an open G-orbit on the multiple flag variety G/P × G/P × . . . × G/P (n factors), (b) the number of G-orbits on the multiple flag variety is finite.
I give the explicit formula for the (set-theoretical) system of Resultants of m+1 homogeneous polynomials in n+1 variables