Архитектура компьютерных систем. Практикум по схемотехническому моделированию. Учебное пособие. Architecture of computer systems. Workshop on the circuit simulation. Training aid.
The workshop is intended for the acquisition of practical skills of computer simulation and study of the functional components and devices of microcomputers using circuit simulation program "Electronic Workbench" students of higher and secondary educational institutions, students of architecture, organization, circuitry and computer modeling of digital components and devices of the computer.
The paper deals with an investigation of relief formation in Europa's surface. Jupiter's satellite Europa is close in size to the Moon. Its surface is covered with a layer of ice crust of thickness 10-30 km. Europa's surface is of large interest, because under the ice crust there is an ocean of liquid water creating conditions for possible life. The entire ice surface of the satellite is covered with a system of bands, valleys, and ridges. These structures are explained by the fact, that the ice surface is rather mobile and it was repeatedly broken from internal stresses and large-scale tectonic processes. The analysis performed showed that compressing, extending, shearing and bending stresses can influence some arbitrarily separated section of Europe's ice surface. The computer simulation with a finite element method (FEM) was performed to see, what types of defects could arise from such effects. The heterogeneity of the satellite's ice cover in thickness, density and temperature was taking into account during the simulation. The calculations, carried out for the cross-section of a thawed ice structure's area, have shown that, the most dangerous, from the crack formation viewpoint, is the shear stress at loading application angles of ±90°. Using models of thawed ice patches in the distributed field of temperatures, the effect of mechanical gravitation-tidal forces on the formation of surface defects on Europa was studied. It is shown that fractures and cracks can have various forms depending on the stress-strained state arising in their vicinity. The formation of such defects is caused by the chaotic set of many factors, mechanic and temperature ones predominantly. Copyright © 2013 by the International Astronautical Federation. All rights reserved.
The methodology of application of circuit simulation programs in the educational process of learning students of information and technical specialties in the system of higher and specialized secondary education is under consideration in the article. There is an example of the use of this methodology for computer simulation and studying the principles of designing and working of the random access memory of the microcomputer using Electronics Workbench.
The results concern roll pass design for rolling a round bar of a 20mm diameter from a 55mm diameter input. Concerning materials, this roll pass design must cover a wide range of steels, from low-carbon micro-alloyed steels to stainless steels. The roll pass design proposal takes into consideration lower plasticity of certain steels. The comparison was enabled by suggesting two roll pass designs. The classical oval-round roll pass design, where the maximum extension coefficient is set to 1.55 in oval and 1.22 in round grooves. The second roll pass design uses a combination of smooth part of the roll (curves) and round roll passes. Distribution of the extension coefficient in individual passes is similar to that of oval-round series. The paper also compares values of energy-force parameters calculated analytically using the method of finite elements. If we compare the distribution of temperature, stress and size of the grain, it is proved that the oval-round roll pass designs are the best as far as the balanced distribution of the above-mentioned values is concerned. The roll pas design combining smooth part of the roll with a round part does not achieve such balance. However, its advantage lies in far lower requirement for the needed length of the working part of the roll. Five passes are carried out on the smooth part of the roll, which considerably cuts down the required length of the roll body. Therefore it is this variant that will be used in the laboratory of wire rolling created within the project RMSTC.
Mathematical and computer simulation of economic processes.
A procedure has been proposed for calculating limited orbits around the L2 libration points of the Sun–Earth system. The motion of a spacecraft in the vicinity of the libration point has been considered a superposition of three components, i.e., decreasing (stable), increasing (unstable), and limited. The proposed procedure makes it possible to correct the state vector of the spacecraft so as to neutralize the unstable component of the motion. Using this procedure, the calculation of orbits around various types of libration points has been carried out and the dependence on the orbit type on the initial conditions has been studied.
In the article are esteemed assigning and main capabilities of the subsystem of the analysis and maintenance of thermal values of designs of radio electronic means ASONIKA-T, and also principles of simulation of thermal processes in designs with the help of the subsystem ASONIKA-T. The example of simulation of thermal processes in a standard design is adduced.
A model for organizing cargo transportation between two node stations connected by a railway line which contains a certain number of intermediate stations is considered. The movement of cargo is in one direction. Such a situation may occur, for example, if one of the node stations is located in a region which produce raw material for manufacturing industry located in another region, and there is another node station. The organization of freight traﬃc is performed by means of a number of technologies. These technologies determine the rules for taking on cargo at the initial node station, the rules of interaction between neighboring stations, as well as the rule of distribution of cargo to the ﬁnal node stations. The process of cargo transportation is followed by the set rule of control. For such a model, one must determine possible modes of cargo transportation and describe their properties. This model is described by a ﬁnite-dimensional system of diﬀerential equations with nonlocal linear restrictions. The class of the solution satisfying nonlocal linear restrictions is extremely narrow. It results in the need for the “correct” extension of solutions of a system of diﬀerential equations to a class of quasi-solutions having the distinctive feature of gaps in a countable number of points. It was possible numerically using the Runge–Kutta method of the fourth order to build these quasi-solutions and determine their rate of growth. Let us note that in the technical plan the main complexity consisted in obtaining quasi-solutions satisfying the nonlocal linear restrictions. Furthermore, we investigated the dependence of quasi-solutions and, in particular, sizes of gaps (jumps) of solutions on a number of parameters of the model characterizing a rule of control, technologies for transportation of cargo and intensity of giving of cargo on a node station.
Event logs collected by modern information and technical systems usually contain enough data for automated process models discovery. A variety of algorithms was developed for process models discovery, conformance checking, log to model alignment, comparison of process models, etc., nevertheless a quick analysis of ad-hoc selected parts of a journal still have not get a full-fledged implementation. This paper describes an ROLAP-based method of multidimensional event logs storage for process mining. The result of the analysis of the journal is visualized as directed graph representing the union of all possible event sequences, ranked by their occurrence probability. Our implementation allows the analyst to discover process models for sublogs defined by ad-hoc selection of criteria and value of occurrence probability
The geographic information system (GIS) is based on the first and only Russian Imperial Census of 1897 and the First All-Union Census of the Soviet Union of 1926. The GIS features vector data (shapefiles) of allprovinces of the two states. For the 1897 census, there is information about linguistic, religious, and social estate groups. The part based on the 1926 census features nationality. Both shapefiles include information on gender, rural and urban population. The GIS allows for producing any necessary maps for individual studies of the period which require the administrative boundaries and demographic information.
Existing approaches suggest that IT strategy should be a reflection of business strategy. However, actually organisations do not often follow business strategy even if it is formally declared. In these conditions, IT strategy can be viewed not as a plan, but as an organisational shared view on the role of information systems. This approach generally reflects only a top-down perspective of IT strategy. So, it can be supplemented by a strategic behaviour pattern (i.e., more or less standard response to a changes that is formed as result of previous experience) to implement bottom-up approach. Two components that can help to establish effective reaction regarding new initiatives in IT are proposed here: model of IT-related decision making, and efficiency measurement metric to estimate maturity of business processes and appropriate IT. Usage of proposed tools is demonstrated in practical cases.