?
Ensuring the Durability of Buildings through the Use of Insulation Systems Based on Polyethylene Foam
Buildings (MDPI). 2022. Vol. 12. No. 11. Article 1937.
Zhukov A., Stepina I., Bazhenova S.
Abstract: In modern polymer composite technology, the use of waste products from other industries or processed waste is reasonable, but this requires more research. The purpose of the research presented in the article was to develop a methodology for selecting the composition of modified polyethylene foam and to assess the flammability of the materials obtained. In these studies, the content of recycled polyethylene, as a result of solving optimization problems, was taken to be equal to 23% of the mass of the polymer. CO2 was used as the foaming gas. The structure of the polymer was modified with flame retardant. This made it possible to obtain materials belonging to the group of flammable, self-extinguishing materials, which significantly expanded the field of application of products based on polyethylene foam. Taking into account the possibilities of seamless insulation casings, the following systems of application of products based on polyethylene foam are considered: floors under mechanical load on the ground; permafrost soil insulation; insulation of external building elements in harsh climatic conditions; floating floors.
Андреев Д. В., Корнев С. А., Bondarenko G. et al., Перспективные материалы 2026 № 6 С. 5–11
Выполнено сравнительное исследование процессов сильнополевой зарядовой
деградации подзатворного диэлектрика структур металл-диэлектрик-полупроводник (МДП)
с алюминиевым и поликремниевым затвором. Зарядовые явления в МДП-структурах
изучали методом сильнополевой инжекции электронов в диэлектрик в режиме возрастания
плотности стрессового инжекционного тока с кратковременными переключениями
в измерительный режим при постоянной низкой плотности инжекционного тока.
Использование данного метода позволило получить новые данные о процессах зарядовой
деградации подзатворного диэлектрика МДП-структур с ...
Added: May 21, 2026
Kaveev A. K., Fedorov V. V., Pavlov A. V. et al., Journal of Materials Chemistry C 2026 Vol. 14 No. 7 P. 2697–2705
Bismuth nanostructures represent a promising material platform for semiconductor nanooptoelectronics and colorimetry owing to the multi-colored light reflection and quantum confinement. In this work, we study the photoluminescent properties of bismuth nanostructures grown using molecular beam epitaxy on the planar CaF2/Si(111) surface. We demonstrate the different surface morphologies of Bi, ranging from planar films obtained ...
Added: May 19, 2026
Масютин Д. А., Moiseev E., Komarov S. et al., Письма в Журнал технической физики 2026 Т. 52 № 7 С. 27–30
Исследованы инжекционные полупроводниковые микролазеры с кольцевым резонатором радиусом 15 мкм с несимметричным расположением внутреннего отверстия резонатора. Показано, что асимметрия обеспечивает формирование в диаграмме направленности двух лепестков излучения, разориентированных на 50° относительно оси смещения внутреннего отверстия. Измеренная добротность резонаторов сопоставима с добротностью дисковых резонаторов и находится на уровне ∼ 10^6. ...
Added: May 18, 2026
Rathish S., Andrey S. Vasenko, Thazhathenair A. et al., The Journal of Physical Chemistry Letters 2026 Vol. 17 No. 18 P. 5386–5394
We demonstrate and rationalize the effect of Au nanoparticles (NPs) on the hierarchical g-C3N4/CeO2 heterojunction. g-C3N4/CeO2 decorated with monodispersed plasmonic Au NPs was synthesized. Detailed analyses showed that CeO2 nanocubes and monodispersed Au NPs were evenly distributed over the 2D g-C3N4 surface, forming a robust interface enriched with abundant active sites. The structure enabled efficient separation of photogenerated charge ...
Added: May 16, 2026
Das A., Paul R., Sharma N. et al., Colloids and Surfaces A: Physicochemical and Engineering Aspects 2026 Vol. 728 P. 138830
Niobium-doped TiO2 (Nb-TiO2), demonstrates dual functionality as an efficient photocatalyst for dye degradation and a promising photoelectrocatalyst for water oxidation. Nb incorporation via a facile hydrothermal method was confirmed by XRD (Rietveld refinement), XPS, TEM, FT-IR, Raman, and BET analyses, indicating successful lattice doping and structural modification. Photocatalytic dye degradation experiments were conducted using a model ...
Added: May 16, 2026
Гущина В. А., / Series chemrxiv-2023-vpzhz-v2 "ChemRxiv". 2023.
All-inorganic perovskite CsPbBr3 and Cs4PbBr6 nanoparticles are being intensively studied due to their unique properties and wide range of applications; however, however, the nature of their optical properties is not yet fully understood due to the difficulty of synthesis of singlephase nanoparticles. In this article we describe the features of the synthesis of single-phase particles ...
Added: May 14, 2026
Гущина В. А., Mendeleev Communications 2025 Vol. 35 No. 2 P. 193–195
All-inorganic perovskite CsPbBr3 and Cs4PbBr6 nanoparticles are intensively studied for their unique optical properties, though synthesizing single-phase nanoparticles has posed challenges. Detailed synthesis method of CsPbBr3 and Cs4PbBr6 single-phase nanoparticles and their chemical and phase analysis are described. Distinctive optical characteristics, such as photoluminescence, optical band gap and the Urbach tail region, are revealed and explained within the current ...
Added: May 14, 2026
Гущина В. А., Physics of Complex System 2026 Vol. 7 No. 1 P. 3–15
Heterostructures based on ZnO nanorods and CsPbBr3 nanocrystals were investigated for their potential as semiconductor SERS substrates. We found that ZnO morphology governs the efficiency of interfacial energy transfer, leading to enhanced photoluminescence under 390 nm excitation and a noticeable reduction of the bandgap in the composites. Raman analysis revealed a pronounced intensity enhancement and ...
Added: May 14, 2026
Гущина В. А., Russian Journal of Inorganic Chemistry 2024 Vol. 69 No. 6 P. 940–948
Currently, ABX3 nanoparticles (NPs) based on lead halides attract the attention due to their unique optical properties and a wide range of applications. The preparation of NPs with lead as a partial or complete replacement is particularly interesting because of the toxicity of this chemical element and most of its compounds. In this study, we propose a ...
Added: May 6, 2026
Yasnitsky L., Голдобин М. А., Мезенцев А. С., Прикладная математика и вопросы управления 2025 № 2 С. 99–116
Представлен обзор современных методов и основанных на них программных
инструментах, применяемых для математического моделирования серийных производственных процессов с целью снижения брака и повышения качества производимых изделий. Перечисляются группы работ, нацеленных на обнаружение и классификацию дефектов, работ, в которых решаются задачи прогнозирования образования дефектов и определения значимости параметров, работ направленных на поиск
оптимального сочетания технологических параметров изготовления изделий, ...
Added: May 5, 2026
Morozov E. V., Demin A. S., Borovitskaya I. V. et al., Inorganic Materials: Applied Research 2026 Vol. 17 No. 3 P. 619–626
This article presents the results of experiments on the impact of powerful pulsed ion-plasma and
electron flows generated in the working chamber of the Plasma Focus PF-5M installation during each highvoltage
discharge on a model aluminum alloy B95. It is shown that the general characteristics of the alloy’s
damage upon exposure to pulsed flows of helium ions (HI) ...
Added: May 4, 2026
Ершов И. А., Системная инженерия и инфокоммуникации 2025 № 4 С. 11–14
The heat consumption of residential buildings is a stochastic series. It is necessary for the design of thermal energy regulators the creation of a neural network model. In the paper, the model is carried out based on Long Short-Term Memory (LSTM). The high accuracy of reproducing the series was achieved by training the model on ...
Added: April 22, 2026
Nikolai N. Kalikin, Petr E. Brandyshev, Yury A. Budkov, Journal of Chemical Physics 2026 Vol. 164 No. 15 Article 154904
This study presents a mean-field theory for zwitterionic polymer solutions confined within attractive slit-like nanopores. Building upon our prior model for self-coacervation [Budkov et al., Soft Matter 19, 3281–3289 (2023)], we demonstrate that strong electrostatic dipole–dipole correlations between monomeric units, coupled with attraction to pore walls, can induce capillary-driven liquid–liquid phase separation inside the pore—a ...
Added: April 18, 2026
Moiseev E., D.A. Masyutin, I.A. Melnichenko et al., Optics and Laser Technology 2026 Vol. 201 No. 115289 Article 115289
Lasing at a wavelength near 255 nm is demonstrated in AlGaN whispering gallery mode microlasers with radii ranging from 1 to 3 µm fabricated on sapphire substrates, representing one of the shortest-wavelength realizations of microdisk lasers on this technologically relevant platform. The minimum threshold energy was 8.8 pJ (power density ≈ 280 kW/cm2) for a microlaser with a ...
Added: April 18, 2026
Pavlenko V. I., Bondarenko G.G., Cherkashina N. I. et al., Inorganic Materials: Applied Research 2026 Vol. 17 No. 2 P. 276–282
A composite material based on polyethylene, boron carbide (B4C), and bismuth oxide (Bi2O3) is
synthesized by the method of joint cryogenic milling of all components in liquid nitrogen environment followed
by pressing. The effect of cryogenic milling on the distribution of fillers in a composite is studied and
the prospects of using this method are assessed in comparison ...
Added: April 9, 2026
Шугабаев Т., Мельниченко И. А., Кузнецов А. et al., Nanoscale Horizons 2026 P. 1–8
The combination of plasmonic systems and the high optical gain of InGaN is a promising approach for the fabrication of nanolasers and other nanoscale light sources. Here, we demonstrate, for the first time, the use of MBE-grown GaN nanowires with embedded InGaN quantum wells as the key components for plasmonic nanolasers. The utilization of quantum ...
Added: April 9, 2026
Sabu T., Ter-Zakaryan K. A., Aleksey Dmitrievich Zhukov et al., Polymers 2023 Vol. 15 No. 20 Article 4104
Effective insulation of buildings and other industrial objects requires the use of materials and system solutions that ensure maximum uniformity and density of insulation shells. The study focuses on the development of insulation systems based on expanded polyethylene and, in particular, on the development of modified polyethylene with reduced flammability containing a flame-retardant modified montmorillonite ...
Added: February 21, 2024
Ter-Zakaryan K. A., Zhukov A., Bessonov I. V. et al., Polymers 2022 Vol. 14 No. 21 Article 4688
One of the most important priorities for all countries with property beyond the Arctic Circle and territories located in permafrost areas is the development of special construction technologies and systems. The required conditions are met by insulation systems based on seamless insulation shells made of polyethylene foam. The study of the strength and performance properties ...
Added: March 20, 2023