?
Структура диагностического комплекса на базе универсальной платформы NI MyRIO
Информационные технологии в проектировании и производстве. 2015. Т. 4. С. 50-54.
The paper presents the structure of computer system for diagnosing of electronic means. It describes all elements of the complex. It details platform NI MyRIO, which is the main calculating and controlling unit of the diagnostic complex and also switching arrangement of single interface of electronic means with plugs MyRIO. The paper displays the prototype of diagnostic complex with audio and USB interfece.
Research target:
Electronics and Electrical Engineering
Priority areas:
engineering science
Language:
Russian
Uvaysov S. U., Koshelev N. A., Качество. Инновации. Образование 2011 № 11 С. 84-88
С целью контроля качества и диагностирования бортовых электронных средств в рамках современного подхода к проектированию (CALS-технология) космических аппаратов предложен метод формирования набора тестовых воздействий, основанный на анализе всех основных режимах работы устройства. ...
Added: November 12, 2012
Екатеринбург : ООО «Форт Диалог-Исеть», 2016
В Сборник трудов включены доклады Пятой Всероссийской научно-технической конференции «Радиовысотометрия – 2016», проходившей с 18 по 20 октября 2016 года в городе Каменск–Уральский.
В сборнике трудов рассмотрены актуальные проблемы радиолокации земной поверхности, совершенствования бортовых радиоэлектронных систем, повышения их точности, надёжности и качества, цифровая обработка информации, математическое и физическое моделирование бортовых радиоэлектронных систем.
Оргкомитет выражает свою признательность промышленным ...
Added: October 21, 2016
Tikhonov А. N., Uvaysov S. U., Ivanov I. et al., Прикаспийский журнал: управление и высокие технологии 2016 № 4 С. 144-154
In the paper has been proved the actuality of solving the problem of vibratory diagnosis of printed board assembly.
Also has been developed the method of diagnosis of mechanical defects of electronic means, which is based on a new approach to give harmonious effect on the printed board assembly or construction elements. The peculiarity of the ...
Added: November 17, 2016
Uvaysov S. U., Качество. Инновации. Образование 2011 № 1 С. 43-46
В рамках реализации CALS-технологий предлагается новый метод безусловного обеспечения контролепригодности радиоэлектронных средств с заданными глубиной и полнотой диагностирования значимых внутренних параметров комплектующих элементов. ...
Added: November 12, 2012
Zhadnov V. V., Надежность и качество сложных систем 2013 № 2 С. 65-73
One of indicators quality of spacecrafts and systems, the requirement to which constantly increase, term of active existence which belongs to group of indicators reliability is and characterizes durability of spacecrafts. Value of term active existence is influenced by various factors among which essential value has durability of electronic equipment. ...
Added: June 1, 2013
Zhadnov V. V., Tihmenev A. N., Надежность и качество сложных систем 2013 № 3 С. 41-47
The article considers the possibility of software creation for calculation of reliability of electronic equipment with the use of technology of cloud computing. It is shown that using the SaaS model is the most effective for the software that implements of the simulation methods of the system ASONIKA-K-RES as an example. ...
Added: February 26, 2014
М. : МИЭМ, 2002
В сборнике приведены статьи преподавателей, сотрудников, аспирантов и студентов МИЭМ и других организаций, которые посвящены вопросам электромагнитной совместимости применительно к электронным средствам, а также общим вопросам проектирования электронных средств.
Сборник предназначен специалистам, занимающихся проектированием электронных средств и вопросам электромагнитной совместимости.
Текст печатается с файлов, предоставленных авторами. ...
Added: April 1, 2014
Artyukhova M. A., Zhadnov V. V., Polesskiy S., Радіоелектроніка, інформатика, управління 2013 № 2 С. 48-53
The current period of creation of the electronic equipment of a responsible and special purpose is characterized by universal introduction of the Quality Management Systems at the enterprises developers and producers of electronic equipment. Quality Management System and its component – Dependability Management System are aimed at providing the guaranteed level of indicators of quality ...
Added: March 6, 2014
Екатеринбург : Издательство АМБ, 2004
В Сборник трудов включены доклады Первой Всероссийской научно-технической конференции «Радиовысотометрия-2004», проходившей с 19 по 21 октября 2004 года в городе Каменск-Уральский.
Рассмотрены актуальные проблемы радиолокации земной поверхности, совершенствование систем контроля, диагностирования и испытаний, цифровая обработка информации, математическое и физическое моделирование радиовысотомеров, радиовысотомерных систем и сложных радиоэлектронных систем.
Оргкомитет выражает свою признательность промышленным и научным коллективам, которые приняли ...
Added: March 29, 2014
Ismail-zade M. R., Uvaysov S. U., Tihmenev A. N., Качество. Инновации. Образование 2014 № 12 С. 81-87
It was proposed. The system allows to carry of electronic means research with presence of faults in static, dynamic and frequency modes. It was described model, the structure, the functionality and the modules relationship of the information system. ...
Added: December 10, 2014
Пономарев Л. И., Zhadnov V. V., Иофин А. А. et al., М. : Радио и связь, 2005
Рассмотрены вопросы осуществления статистического контроля и анализа качества электронных средств на этапах производства и эксплуатации по экспериментальным данным. Приведено описание основных методов статистического анализа качества электронных средств по количественному и альтернативному признакам и характеристики контрольных карт. Рассмотрены методы организации одноступенчатого и многоступенчатого приемочного контроля при производстве электронных средств.
Приведены характеристики универсальных и специализированных программных средств автоматизации ...
Added: January 2, 2014
Zhadnov V. V., Качество. Инновации. Образование 2014 № 10 С. 35-41
The article considers the issues of estimating the temperature tolerances of housings radio electronic elements mounted on the circuit board. Describes the methods of calculation of tolerances and key ratios calculated. The expediency of application of the Monte-Carlo method for calculation of tolerances temperature corps radio electronic elements mounted on the circuit board. ...
Added: November 25, 2014
Tumkovskiy S., Uvaysov S. U., Ivanov I. et al., Мир измерений 2007 № 12 С. 4-7
В работе представлен метод неразрушающего контроля бортовой космической аппаратуры, основанный на анализе вибрационных характеристик изделий. ...
Added: November 12, 2012
Екатеринбург : ИД "Третья столица", 2007
В сборнике трудов рассмотрены актуальные проблемы радиолокации земной поверхности, совершенствование систем контроля, диагностирования и испытаний, цифровая обработка информации, математическое и физическое моделирование радиовысотомеров, радиовысотомерных систем и сложных радиоэлектронных систем.
Оргкомитет выражает свою признательность промышленным и научным коллективам, которые приняли самое непосредственное участие в организации и проведении конференции, и благодарит всех авторов за предоставленные материалы.
Оргкомитет планирует проведение ...
Added: March 29, 2014
Zhadnov V. V., Polesskiy S., Tihmenev A. N. et al., Компоненты и технологии 2011 № 6 С. 168-174
В статье рассмотрены вопросы создания и внедрения информационной технологии обеспечения надежности сложных электронных средств (ЭС) военного и специального назначения. Основу технологии составляют процессы расчетной оценки характеристик и показателей надежности составных частей (СЧ) для всех уровней разукрупнения, начиная от электрорадио изделий (ЭРИ) и компонентов компьютерной техники (ККТ), электронных модулей первого уровня (ЭМ1) и заканчивая ЭС в ...
Added: January 25, 2013
Kechiev L., / НИУ ВШЭ. Series SCIENCE, TECHNOLOGY, INNOVATION "SCIENCE, TECHNOLOGY, INNOVATION". 2014.
The problem of standardization in the field of functional safety of electronic means is considered. The problem maintenance, the description of risks and hazards of functioning of electronic equipment is given. Data on a direction of standardization in the field of functional safety are provided. Base standards in the field of functional safety are considered. ...
Added: April 4, 2015
Красноярск : ИПЦ КГТУ, 2000
Представлены доклады Всероссийской научно-технической конференции молодых ученых и студентов, посвященной 105-й годовщине Дня радио, состоявшейся в г. Красноярске 4-5 мая 2000 г.
Отражены последние разработки в области радиотехники и радиоэлектроники по направлениям: радиотехнические системы; радионавигация; СВЧ технология; антенны и устройства; технология; конструирование и компоненты электронных средств; приборостроение; нейроинформатика в радиоэлектронике; автоматизация проектирования.
Рекомендуется студентам и аспирантам радиотехнических ...
Added: March 16, 2014
Kofanov Y. N., Sotnikova S., Tikhonov А. N. et al., Информационные технологии в проектировании и производстве 2014 № 4 С. 50-55
In this paper, we propose a diagnostic model of electronic means (ES), based on the complex electrical, thermal and mechanical modeling for high reliability computer-aided diagnosis. The method developed on the basis of this model allows to detect hidden faults and system failures due to the interconnection of electrical, thermal and mechanical processes occurring in ...
Added: November 14, 2014
Ivanov I., Uvaysov S. U., Tikhonov А. N. et al., Тяжелое машиностроение 2015 № 5 С. 31-34
The paper offers approach to the well-founded option of the component parts of the electronic means for organization of effective diagnostics during the final inspection and the stage of exploitation. Peculiarity of the offered method is that it takes into consideration both objectives scheme indexes (sensitivity, reliability, range of tolerances) and subjective decision of designers, ...
Added: October 23, 2014
Лушпа И. Л., Zhadnov V. V., Надежность и качество сложных систем 2014 № 1 С. 50-57
The article considers the questions of reliability evaluation of vibration isolators are used to protect electronic equipment from vibration impacts. The calculations of the failure rate springs by different techniques. It is shown that application techniques, taking into account the influence of features of constructive and technological performance, allows to solve not only problems of ...
Added: June 3, 2014
Zhadnov V. V., Tihmenev A. N., Надежность 2013 № 1 С. 32-43
Enterprises of Russia’s radio industry engaged in development and production of electronic instrumentation (EI) for space vehicles (SV), face problems of insuring reliability, and, first of all, problems of failure-free operation. Failures during EI acceptance tests and accidents at SV operation are real evidence of mentioned problems. One of the reasons of such situation is ...
Added: February 12, 2013
Zhadnov V. V., Лушпа И. Л., Информационные технологии в проектировании и производстве 2014 № 4 С. 17-23
The article considers the questions assessing the reliability of mechanical components used in the electronic equipment in the early stages of design. The calculations of failure rates springs shock absorbers according to various methods. It is shown that the use of models failure rates of mechanical elements, taking into account the peculiarities of their structural ...
Added: November 13, 2014
Uvaysov S. U., Ivanov I., World Applied Sciences Journal 2013 Vol. 24 P. 196-201
The paper discusses the basic operations to ensure testability of electronic means (EM). The result of the proposed transactions is the basis of the diagnostic data. To improve the efficiency of the diagnostic modeling of the underlying testability design, the processes of calculation of tolerance limits and creation a list of possible defects are considered. ...
Added: October 15, 2013
Aminev D., Manohin A., Semenenko A. N. et al., Прикаспийский журнал: управление и высокие технологии 2015 № 1(29) С. 108-117
Authors are proved need of contact control methods application of electronic means elements when carrying out thermal diagnosing in the closed constructive volume. The method of the error calculation brought by the sensor at measurement of element temperature is described. In article topological thermal models of electronic component mounted on the printed circuit board and ...
Added: December 10, 2014