• A
  • A
  • A
  • АБВ
  • АБВ
  • АБВ
  • A
  • A
  • A
  • A
  • A
Обычная версия сайта
  • RU
  • EN
  • HSE University
  • Publications
  • Articles
  • High-entropy alloy coating deposition by detonation spraying combined with heat treatment
  • RU
  • EN
Расширенный поиск
Высшая школа экономики
Национальный исследовательский университет
Priority areas
  • business informatics
  • economics
  • engineering science
  • humanitarian
  • IT and mathematics
  • law
  • management
  • mathematics
  • sociology
  • state and public administration
by year
  • 2027
  • 2026
  • 2025
  • 2024
  • 2023
  • 2022
  • 2021
  • 2020
  • 2019
  • 2018
  • 2017
  • 2016
  • 2015
  • 2014
  • 2013
  • 2012
  • 2011
  • 2010
  • 2009
  • 2008
  • 2007
  • 2006
  • 2005
  • 2004
  • 2003
  • 2002
  • 2001
  • 2000
  • 1999
  • 1998
  • 1997
  • 1996
  • 1995
  • 1994
  • 1993
  • 1992
  • 1991
  • 1990
  • 1989
  • 1988
  • 1987
  • 1986
  • 1985
  • 1984
  • 1983
  • 1982
  • 1981
  • 1980
  • 1979
  • 1978
  • 1977
  • 1976
  • 1975
  • 1974
  • 1973
  • 1972
  • 1971
  • 1970
  • 1969
  • 1968
  • 1967
  • 1966
  • 1965
  • 1964
  • 1963
  • 1958
  • More
Subject
News
November 17, 2026
Physicists Show How a Solvent Shapes the Response of Drug Molecules
Many drug molecules can switch between different three-dimensional shapes. Using a mathematical model of ibuprofen dissolved in supercritical CO₂, researchers from HSE University and the Institute of Solution Chemistry of the Russian Academy of Sciences have shown that the solvent can make these molecules appear to respond unusually slowly. The molecules themselves continue to change shape rapidly, but their surroundings rearrange much more slowly, and this lag shows up in the measurements. The study has been published in The Journal of Chemical Physics. 
November 10, 2026
Physicists Train AI to Optimise Particle Beams in Accelerators
Researchers from the AI and Digital Science Institute at the HSE Faculty of Computer Science and the Budker Institute of Nuclear Physics at the Siberian Branch of the Russian Academy of Sciences have developed RLABC (Reinforcement Learning for Accelerator Beamline Control), a framework that uses reinforcement learning to identify optimal settings for a particle accelerator. In a computer simulation, RLABC optimised the accelerator's parameters to achieve a particle transmission rate of 70%. The study has been published in Computer Physics Communications.
November 9, 2026
'Organ-on-a-Chip Technology Could Eliminate the Need for Animal Testing'
The Laboratory of Molecular Physiology at the HSE Faculty of Biology and Biotechnology investigates how molecular regulators known as microRNAs control gene expression and contribute to the development of diseases, including cancer, viral and inflammatory conditions, and pregnancy complications. At HSE University, researchers develop organ-on-a-chip models: miniature devices containing living cells that mimic the functions of human organs, such as the placenta and intestines. These models help researchers understand how diseases develop and how drugs affect them. HSE News Service spoke with Evgeny Knyazev, Head of the Laboratory.

 

Have you spotted a typo?
Highlight it, click Ctrl+Enter and send us a message. Thank you for your help!

Publications
  • Books
  • Articles
  • Chapters of books
  • Working papers
  • Report a publication
  • Research at HSE

?

High-entropy alloy coating deposition by detonation spraying combined with heat treatment

International Journal of Advanced Manufacturing Technology. 2023. Vol. 129. P. 2647–2659.
Batraev I., Dudina D., Rybin D., Ulianitsky V., Sova A., Ostovari Moghaddam A., Doubenskaia M., Trofimov E., Samodurova M.

In this work, feasibility tests of new two-stage approach of deposition of thick high-entropy alloy coatings were performed. At the first stage of this approach, metal composite coating is formed by detonation spraying of low-entropy metal powder blends. At the second stage, the composite precursor coating is heat treated in order to promote the synthesis of high-entropy phases. The tests were carried out using three different powder mixtures of Fe, Ni, Cu, Co, and Al powders. Experimental results showed that the detonation spraying allows formation of uniform metal composite coating. The microstructure analysis and microhardness measurements of the coating before and after heat treatments confirmed that the heat treatment enables element diffusion in the coating followed by formation of CoFeNi, CoCuFe0.8Ni, and Al0.05CoCu0.3FeNi alloys with uniform fcc structure after recrystallization. At the same time, the final composition of the coatings differed from the targeted ones due to different deposition efficiencies of the particles during detonation spraying process.

Research target: Materials Technologies
Language: English
Full text
DOI
Keywords: термическая обработкаheat treatmentвысокоэнтропийный сплавHigh-entropy alloysdetonation sprayingдетонационное напылениеComposite coatingКомпозитное покрытие
Similar publications
Tailoring copper content in high-entropy oxides for enhanced water oxidation catalysis
Mehrabi-Kalajahi S., Vasigh S. A., Yousefi Bavili H. et al., Scientific Reports 2026 Vol. 16 Article 20035
High-entropy oxides (HEOs) have recently gained considerable attention as next-generation electrocatalysts owing to their exceptional compositional flexibility, structural stability, and synergistic multimetal effects. In this study, a series of Cu-modified high-entropy oxide catalysts (HEO–Cu) with different Cu loadings (20%, 30%, 40%, 50%, and 60%) supported on nickel foam (NF) were synthesized via a facile co-precipitation ...
Added: November 4, 2026
Hydrogen trapping characteristics and associated damage in stainless steel-carbon steel dissimilar welded joints for pipeline applications in sour oil environments
Sabzi M., Abdollahzadeh A., Jafarian H. R. et al., International Journal of Pressure Vessels and Piping 2026 Vol. 225 Article 105979
This study investigates the microstructural evolution, hydrogen embrittlement (HE) susceptibility, and sour corrosion resistance of dissimilar A105 carbon steel/316L austenitic stainless steel welded joints representative of pipeline components produced by continuous (CCGTAW) and pulsed current gas tungsten arc welding (PCGTAW) with ER309L filler. Microstructural analysis revealed that pulsed arc thermal cycling promoted grain refinement, transitioning ...
Added: November 4, 2026
Повышение износостойкости железнодорожных колес из колесной углеродистой стали путем создания минерального покрытия
Кислов С. В., Сказочкин А. В., Bondarenko G., Фундаментальные и прикладные проблемы техники и технологии 2026 Т. 31 № 5 С. 96–107
В статье представлены результаты сравнительных исследований износостойкости образцов из железнодорожных колес - а) без покрытия и б) с поверхностным слоем,созданным по технологии минеральных покрытий. Тестируемые образцы были изготовлены из стандартных железнодорожных колес из стали СТ2 (Россия), а контрролики – из рельсовой стали Э76ХФ (Россия). На торцевой поверхности образцов были созданы слои, модифицированные ультрадисперсными частицами минералов. ...
Added: November 3, 2026
Количественный фазовый анализ сплавов системы Al-Cu-Li-Mg
Бецофен С. Я., Осинцев О. Е., Кабанова Ю. А. et al., Вестник Московского авиационного института 2016 Т. 23 № 4 С. 181–188
Методами рентгеноструктурного анализа и механических испытаний на растяжение исследованы особенности формирования анизотропии механических свойств, текстуры и фазового состава тонколистовых сплавов Al–4,3Cu–1,4Li–0,4Mg и Al–1,8Li–1,8Cu–0,9Mg. Установлен различный тип анизотропии прочностных свойств сплавов: нормальный (прочность в долевом направлении выше, чем в поперечном) для сплава Al–4,3Cu–1,4Li–0,4Mg и обратный для сплава Al–1,8Li–1,8Cu–0,9Mg. Показано, что на анизотропию прочностных свойств влияет не ...
Added: October 21, 2026
Разработка метода модификации поверхности чугуна ВЧ40 с повышенной стойкостью к гидроабразивному износу
Сказочкин А. В., Бондаренко Г.Г., Гайдар А. И. et al., Перспективные материалы 2026 № 11 С. 60–75
Рассмотрены механизмы структурно-фазовой перестройки и физико-химические процессы при формировании износостойких и коррозионно-пассивных покрытий на чугуне ВЧ40 комбинированной технологией, сочетающей ультразвуковое пластическое деформирование и электроискровое легирование (ЭИЛ). Образцы модифицировали ультразвуковым индентором (УЗИ) в среде микрочастиц SiO2 (5 мкм) под давлением 400 МПа с последующим ЭИЛ графитовым и твердосплавным (ВК8) электродом. Структуру, состав и микротвердость изучали методами сканирующий электронный микроскопии совмещенной с энергодисперсионной рентгеновской ...
Added: October 16, 2026
Design of Novel Thiazolothiazole-Containing Conjugated Polymers for Organic Solar Cells and Modules
Тукачев Н. В., Akkuratov A., Nikitenko S. et al., Solar Energy 2020 Vol. 198 P. 605–611
One of the major challenges in the field of organic photovoltaics is associated with high-throughput manufacturing of efficient and stable organic solar cells. Practical realization of technologies for production of large-area organic solar cells requires the development of novel materials with a defined combination of properties ensuring sufficient reliability and scalability of the process in ...
Added: October 14, 2026
Hydrogen Halide Gas Sensors: Active Materials, Operation Principles, and Emerging Technologies
Liu X., Nikita Tukachev, Wang K. et al., INTERDISCIPLINARY MATERIALS 2026 Vol. 5 No. 1 P. 85–123
Hydrogen halide gases are one of the most wide-spread pollutants of atmosphere, which are generated by various industrial sectors or natural processes, and may dramatically affect human health above certain thresholds of exposure. Hence, it is critically important to develop effective sensing methods for these gases. Herein, we review the recent progress as well as ...
Added: October 14, 2026
High Temperature Oxidation Resistance of Off-Stoichiometric (Ni39.6Co29.3Cr10Al15.8Ta3.3Nb2)98.5B1.5 Chemically Complex Intermetallic Alloy
Ostovari Moghaddam A., Mehrabi-Kalajahi S., Solizoda I. A. et al., Metals and Materials International 2026 Vol. 32 P. 3767–3775
Off-stoichiometric boron-doped chemically complex intermetallic alloys (CCIMAs) have recently emerged as a new avenue for overcoming the low temperature brittleness of ordered superlattices. However, their behavior at high temperatures remains unexplored. In this study, a novel (Ni39.6Co29.3Cr10Al15.8Ta3.3Nb2)98.5B1.5 CCIMA was prepared and its oxidation resistance over a wide temperature range (500 °C–950 °C) was studied. The ...
Added: October 1, 2026
Role of dislocations in the mobility of pinned helium bubbles: Molecular dynamics simulations in aluminum
Piliugin L., Antropov A., Lobashev E. et al., Journal of Nuclear Materials 2026 Vol. 632 Article 156876
The effects of dislocations on the mobility of gas nanobubbles pinned to them are considered as novel unex- plored mechanisms of accelerated fission gas release and investigated using classical molecular dynamics of helium bubbles in FCC aluminum. Non-equilibrium methods are developed to calculate the mobility of a pinned bubble both along and across the dislocation ...
Added: September 28, 2026
Thermodynamic Stabilization of PbS Quantum Dots for High-Performance Short-Wave Infrared Photodetection
Li Y., Han J., Zaman N. et al., ACS Applied Materials & Interfaces 2026 Vol. 18 No. 39 P. 54241–54251
The development of lead sulfide (PbS) quantum dot (QD) photodetectors for short-wave infrared (SWIR) applications has been fundamentally limited by the thermodynamic instability of large PbS QD facets, which leads to aggregation and epitaxial fusion. In this work, robust thermodynamic stabilization was achieved by introducing methylammonium chloride (MACl) in PbS QD surface passivation, as validated ...
Added: September 26, 2026
Особенности взаимодействия мощного импульсного лазерного излучения с материалами вакуумной камеры термоядерного реактора
Боровицкая И. В., Пименов В. Н., Коршунов С. Н. et al., Перспективные материалы 2026 № 10 С. 37–54
Проведено сравнение, обобщение и систематизация механизмов эрозии и разрушения поверхности малоактивируемых материалов, перспективных для использования в качестве материалов вакуумной камеры термоядерных реакторов: ванадия, его сплава V – 10 Ti – 6 Cr – 0,05 Zr – 0,1 Si и вольфрама при последовательном воздействии на них ионных и тепловых потоков. Тепловые потоки имитировали с помощью мощного импульсного лазерного излучения (ЛИ), создаваемого ...
Added: September 22, 2026
The Effect of the Gate Material in MIS Structures on the High-Field Charge Degradation in the Gate Dielectric
Andreev D. V., Kornev S. A., Bondarenko G.G. et al., Inorganic Materials: Applied Research 2026 Vol. 17 No. 5 P. 1226–1230
Comparative studies are carried out to investigate high-field charge degradation effects in the gate dielectric of metal—insulator—semiconductor (MIS) structures with aluminum and polysilicon gates. Charging phenomena in MIS structures are explored using high-field electron injection into the dielectric under conditions of gradually increasing voltage current density, with periodic short-term switching to a measurement mode at a constant low injection ...
Added: September 15, 2026
Rubber-Based Flexible Polymer Composite for Radiation Protection with Rare Earth Metal Oxides
Cherkashina N. I., Pavlenko V. I., Bondarenko G.G. et al., Inorganic Materials: Applied Research 2026 Vol. 17 No. 5 P. 1247–1257
The description is given to the synthesis of a flexible polymer composite for radiation protection based on a rubber matrix and rare-earth metal oxides (Dy2O3 and Gd2O3). The physico-mechanical parameters are established for the compositions with dysprosium oxide as follows: the density ranging from 1.31 to 2.44 g/cm3, tensile strength is staying between 6.06 and 1.72 MPa. In ...
Added: September 15, 2026
Interband effects in the intertype regime of dirty two-band superconductors
P. M. Marychev, A. A. Shanenko, Physical Review B: Condensed Matter and Materials Physics 2026 Vol. 114 No. 7 Article 074509
We investigate the effect of weak interband impurity scattering on the intertype (IT) domain between type-I and type-II superconductivity in diffusive two-band superconductors. Our results show that the significant broadening of the IT domain with increasing band diffusivity ratio, previously established in the absence of interband scattering, persists under weak interband scattering. However, depending on ...
Added: September 7, 2026
Temperature-driven structural crossover of vortex matter in a Penrose quasicrystal
Tomayeva M., Vyacheslav D. Neverov, Arkady A. Shanenko et al., Physical Review B: Condensed Matter and Materials Physics 2026 Vol. 114 No. 2 Article 024516
We report a thermally driven structural crossover of vortex matter in a two-dimensional superconducting Penrose quasicrystal. At low temperatures, vortices are pinned by the quasiperiodic lattice, forming an aperiodic pattern. With increasing temperature, vortex-vortex interactions dominate, leading to a conventional triangular Abrikosov lattice. Our findings reveal a tunable interplay between intrinsic pinning and vortex interactions, ...
Added: September 5, 2026
Scalable machine learning approach to disordered 𝑠-wave superconductors
Vyacheslav D. Neverov, Lukyanov A., Andrey V. Krasavin et al., Physical Review B: Condensed Matter and Materials Physics 2026 Vol. 113 No. 2 Article 024515
We develop a neural network approach to solve the self-consistent Bogoliubov-de Gennes equations in strongly disordered s-wave superconductors. The method accurately reproduces inhomogeneous gap distributions and generalizes to system sizes far larger than those used in training. It reduces computational scaling from O(N6 ) to O(N2), enabling quantitative analysis of percolation phenomena and the superconductor-insulator ...
Added: September 5, 2026
Моделирование влияния тонкой диэлектрической пленки, существующей на части поверхности катода, на переход тлеющего газового разряда в дуговой разряд
Бондаренко Г.Г., Фишер М. Р., Кристя В. И., Известия РАН. Серия физическая 2026 Т. 90 № 4 С. 867–874
Сформулирована модель катодного слоя тлеющего газового разряда при наличии на части рабочей поверхности катода тонкой диэлектрической пленки. Показано, что переход тлеющего разряда в дуговой разряд, сопровождающийся значительным увеличением плотности разрядного тока и уменьшением катодного падения напряжения, происходит наиболее быстро, если пленка занимает примерно половину поверхности катода. ...
Added: September 4, 2026
(111)-Textured p-Type PbTe Films Grown on Muscovite Mica with High Room-Temperature Hole Mobility
Danil Kobtsev, Jarashneli A., Maman N. et al., Applied Sciences (Switzerland) 2026 Vol. 16 No. 17 Article 8577
AIVBVI semiconductors, particularly lead chalcogenides, remain key materials for mid-wave infrared (MWIR) photodetection due to their narrow bandgap and exceptional carrier transport properties. However, the realization of high-quality p-type PbTe thin films, suitable for p–n junction devices, remains a technological challenge. In this work, we report the fabrication of high-mobility p-type PbTe thin films grown on ...
Added: August 30, 2026
Modeling of the Influence of Temperature on Interaction of a Cathode with a Thin Insulating Film and a Glow Gas Discharge Plasma in a Mixture of Argon and Mercury Vapor
G. G. Bondarenko, Kristya V. I., Savichkin D. O. et al., Journal of Surface Investigation: X-Ray, Synchrotron and Neutron Techniques 2026 Vol. 20 No. 2 P. 417–423
A model of a glow gas discharge in a mixture of argon and mercury vapor is formulated in the presence of a thin insulating film on the cathode surface. Dependences of the discharge characteristics on the mixture temperature are calculated in the range of its variation, in which a noticeable contribution to ionization of the working gas is ...
Added: August 1, 2026
A simplified approach to predicting thermal expansion anisotropy of solids from first principles: application to the orthorhombic phase of Mo2C
Dmitry Vasilyev, Gorev V., Ikhsanov R. et al., Journal of Materials Science 2026 No. 61 P. 25452–25470
The orthorhombic phase of 𝛼-Mo2 C is a key component in electrocatalytic applications, as Mo2C-based catalysts can exhibit catalytic performance comparable to or exceeding that of noble metals. Despite its technological relevance, theoretical understanding of the anisotropy in the thermal expansion and related thermoelastic properties of 𝛼-Mo2 C remains limited. In this work, first-principles calculations ...
Added: July 23, 2026
Influence of Pulsed Laser Radiation on the Morphology and Surface Properties of Tungsten Implanted with Helium Ions
Borovitskaya I. V., Pimenov V. N., Korshunov S. N. et al., Physics of Atomic Nuclei 2026 Vol. 89 No. 1 P. S48–S55
The effect of high-power pulsed laser radiation (LR) generated in the GOS 1001 setup in the Q-modulated mode (with a flux power density q equal to 1 × 1014 W/m2, pulse duration t = 50 ns, and the number of pulses N from 1 to 8 in vacuum) on the structure and microhardness of the surface of ...
Added: July 22, 2026
Impact of heat treatment on microstructure and mechanical properties of additively manufactured aluminum bronze
Filippova A. V., Yurchenko N. Y., Smirnov S. A. et al., Journal of Alloys and Compounds 2026 No. 1074 Article 189162
This study investigates the effects of post-processing heat treatment at 300–500 °C on the microstructure, hardness, and tensile properties of laser powder bed fusion (PBF-LB) processed Al-bronze processed with energy densities (ED) in the range of 125–938 J/mm3. In the as-printed state, sharp needle-like α + β′ laths form at lower ED whereas with increasing ED, the β′ ...
Added: June 12, 2026
The interplay of objective fat content and subjective fat perception in determining consumer acceptance of bovine milk
Semenova D., Radygina A., Zaripova J. et al., Nutrition and Food Science 2026 Vol. 56 No. 5 P. 969–981
Purpose This study aims to investigate how objective (chemical composition, processing method) and subjective (perceived fat content) milk characteristics influence taste perception. Design/methodology/approach A blind tasting experiment was conducted with 36 participants who evaluated six commercial milk samples (all 2.5% fat) differing in thermal processing and brand territorial coverage. Each sample was tasted twice, yielding 432 observations. Fatty ...
Added: May 14, 2026
Assessing the Effects of Chemical Composition and Short-Range Ordering on the Tensile Deformation Behavior of Nanocrystalline High-Entropy Alloys Nb–Ta–Hf–Zr: A Combined Study on Molecular Dynamics and Monte Carlo Simulation
Babicheva R., Kumar A., Kiran R. et al., Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science 2025 Vol. 56 P. 5646–5663
In the work, simulations using Monte Carlo (MC) and molecular dynamics (MD) methods are carried out to investigate the Nb–Ta–Hf–Zr system refractory high-entropy alloys (HEAs). In particular, the effects of chemical composition and grain boundary (GB) network on short-range ordering (SRO) during combined MC/MD modeling of relaxation mimicking diffusion process are investigated on single-crystalline and ...
Added: November 27, 2025
  • About
  • About
  • Key Figures & Facts
  • Sustainability at HSE University
  • Faculties & Departments
  • International Partnerships
  • Faculty & Staff
  • HSE Buildings
  • HSE University for Persons with Disabilities
  • Public Enquiries
  • Studies
  • Admissions
  • Programme Catalogue
  • Undergraduate
  • Graduate
  • Exchange Programmes
  • Summer University
  • Summer Schools
  • Semester in Moscow
  • Business Internship
  • Research
  • International Laboratories
  • Research Centres
  • Research Projects
  • Monitoring Studies
  • Conferences & Seminars
  • Academic Jobs
  • Yasin (April) International Academic Conference on Economic and Social Development
  • Media & Resources
  • Publications by staff
  • HSE Journals
  • Publishing House
  • iq.hse.ru: commentary by HSE experts
  • Library
  • Economic & Social Data Archive
  • Video
  • HSE Repository of Socio-Economic Information
  • HSE1993–2026
  • Contacts
  • Copyright
  • Privacy Policy
  • Site Map
Edit