Проектирование делителя мощности в составе распределительно-суммирующей системы
Theoretical and experimental results of curing of polymer composite pipes with the use of microwave radiation energy are presented. The results of studies on the accelerated curing of polymer composite pipes with diameter of 2000 mm, thickness of 36 mm at a temperature of +200°C and at anelectromagnetic field frequency oscillation of 2450 MHz and the output microwave power of 115 kW in a beam-type microwave device are given. The temperature deviation from the nominal value on the outer surface of the pipe is absent, and in the thickness of pipe does not exceed 5°C. A method of composite pipes curing can reduce energy costs, increase productivity and improve working conditions of staff.
The results of calculation and measurement of temperature distribution in the leasing out of dielectric materials which are heated up in the microwave devices wave-water type. The calculation method of microwave devices of a waveguide type of heat treatment of sheet dielectric materials. Considered microwave devices, Otley-exclusive feature of which is the change of the geometrical sizes of a narrow wall of a rectangular waveguide, working mainly on the type of waves to ensure a uniform temperature in the processed sheet the dielectric-dielectric material.
The method of calculation of the temperature distribution in the dielectric material for the traveling wave microwave devices is presented. The basic equations for the temperature distribution in the direction of the electromagnetic field energy propagation with considering the dependence of the dielectric parameters of a material on the temperature changes and taking into account the heat transfer to the environment for the arbitrary design of the electrodynamic system are obtained. The results of calculation and measurements of the temperature distribution of the material in the direction of the traveling wave propagationat the electromagnetic field frequency oscillations of 2450 MHz are given. The discrepancy of calculated and measured characteristics of the temperature distribution in the material does not exceed 10%.
The dynamics of a two-component Davydov-Scott (DS) soliton with a small mismatch of the initial location or velocity of the high-frequency (HF) component was investigated within the framework of the Zakharov-type system of two coupled equations for the HF and low-frequency (LF) fields. In this system, the HF field is described by the linear Schrödinger equation with the potential generated by the LF component varying in time and space. The LF component in this system is described by the Korteweg-de Vries equation with a term of quadratic influence of the HF field on the LF field. The frequency of the DS soliton`s component oscillation was found analytically using the balance equation. The perturbed DS soliton was shown to be stable. The analytical results were confirmed by numerical simulations.
Radiation conditions are described for various space regions, radiation-induced effects in spacecraft materials and equipment components are considered and information on theoretical, computational, and experimental methods for studying radiation effects are presented. The peculiarities of radiation effects on nanostructures and some problems related to modeling and radiation testing of such structures are considered.